[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <3cb6173d-2fa2-8c8f-1f5d-4e4b6064f80b@kernel.org>
Date: Sun, 1 May 2016 18:13:28 +0100
From: Jonathan Cameron <jic23@...nel.org>
To: Crestez Dan Leonard <leonard.crestez@...el.com>,
linux-iio@...r.kernel.org
Cc: linux-kernel@...r.kernel.org, Hartmut Knaack <knaack.h@....de>,
Lars-Peter Clausen <lars@...afoo.de>,
Peter Meerwald-Stadler <pmeerw@...erw.net>,
Daniel Baluta <daniel.baluta@...el.com>,
Ge Gao <GGao@...ensense.com>
Subject: Re: [PATCH 3/7] iio: inv_mpu6050: Only toggle DATA_RDY_EN in
inv_reset_fifo
On 29/04/16 20:02, Crestez Dan Leonard wrote:
> Signed-off-by: Crestez Dan Leonard <leonard.crestez@...el.com>
Looks fine to me...
> ---
> drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c | 13 +++++++-----
> drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c | 3 ++-
> 2 files changed, 10 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c
> index 8455af0..3fc0b71 100644
> --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c
> +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c
> @@ -41,7 +41,8 @@ int inv_reset_fifo(struct iio_dev *indio_dev)
> struct inv_mpu6050_state *st = iio_priv(indio_dev);
>
> /* disable interrupt */
> - result = regmap_write(st->map, st->reg->int_enable, 0);
> + result = regmap_update_bits(st->map, st->reg->int_enable,
> + INV_MPU6050_BIT_DATA_RDY_EN, 0);
> if (result) {
> dev_err(regmap_get_device(st->map), "int_enable failed %d\n",
> result);
> @@ -68,8 +69,9 @@ int inv_reset_fifo(struct iio_dev *indio_dev)
> /* enable interrupt */
> if (st->chip_config.accl_fifo_enable ||
> st->chip_config.gyro_fifo_enable) {
> - result = regmap_write(st->map, st->reg->int_enable,
> - INV_MPU6050_BIT_DATA_RDY_EN);
> + result = regmap_update_bits(st->map, st->reg->int_enable,
> + INV_MPU6050_BIT_DATA_RDY_EN,
> + INV_MPU6050_BIT_DATA_RDY_EN);
> if (result)
> return result;
> }
> @@ -92,8 +94,9 @@ int inv_reset_fifo(struct iio_dev *indio_dev)
>
> reset_fifo_fail:
> dev_err(regmap_get_device(st->map), "reset fifo failed %d\n", result);
> - result = regmap_write(st->map, st->reg->int_enable,
> - INV_MPU6050_BIT_DATA_RDY_EN);
> + result = regmap_update_bits(st->map, st->reg->int_enable,
> + INV_MPU6050_BIT_DATA_RDY_EN,
> + INV_MPU6050_BIT_DATA_RDY_EN);
>
> return result;
> }
> diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c
> index e8818d4..1a6bad3 100644
> --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c
> +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c
> @@ -69,7 +69,8 @@ static int inv_mpu6050_set_enable(struct iio_dev *indio_dev, bool enable)
> if (result)
> return result;
>
> - result = regmap_write(st->map, st->reg->int_enable, 0);
> + result = regmap_update_bits(st->map, st->reg->int_enable,
> + INV_MPU6050_BIT_DATA_RDY_EN, 0);
> if (result)
> return result;
>
>
Powered by blists - more mailing lists