linux-kernel - [PATCH 01/16] phy: rcar-gen2: add fallback binding

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1462162987-13023-2-git-send-email-kishon@ti.com>
Date:	Mon, 2 May 2016 09:52:52 +0530
From:	Kishon Vijay Abraham I <kishon@...com>
To:	<gregkh@...uxfoundation.org>
CC:	<kishon@...com>, <linux-kernel@...r.kernel.org>
Subject: [PATCH 01/16] phy: rcar-gen2: add fallback binding

From: Simon Horman <horms+renesas@...ge.net.au>

In the case of Renesas R-Car hardware we know that there are generations of
SoCs, e.g. Gen 2 and Gen 3. But beyond that its not clear what the
relationship between IP blocks might be. For example, I believe that
r8a7790 is older than r8a7791 but that doesn't imply that the latter is a
descendant of the former or vice versa.

We can, however, by examining the documentation and behaviour of the
hardware at run-time observe that the current driver implementation appears
to be compatible with the IP blocks on SoCs within a given generation.

For the above reasons and convenience when enabling new SoCs a
per-generation fallback compatibility string scheme being adopted for
drivers for Renesas SoCs.

Signed-off-by: Simon Horman <horms+renesas@...ge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@...der.be>
Acked-by: Rob Herring <robh@...nel.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@...com>
---
 .../devicetree/bindings/phy/rcar-gen2-phy.txt      |    8 +++++++-
 drivers/phy/phy-rcar-gen2.c                        |    1 +
 2 files changed, 8 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt b/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt
index d564ba4..91da947 100644
--- a/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt
+++ b/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt
@@ -7,6 +7,12 @@ Required properties:
 - compatible: "renesas,usb-phy-r8a7790" if the device is a part of R8A7790 SoC.
 	      "renesas,usb-phy-r8a7791" if the device is a part of R8A7791 SoC.
 	      "renesas,usb-phy-r8a7794" if the device is a part of R8A7794 SoC.
+	      "renesas,rcar-gen2-usb-phy" for a generic R-Car Gen2 compatible device.
+
+	      When compatible with the generic version, nodes must list the
+	      SoC-specific version corresponding to the platform first
+	      followed by the generic version.
+
 - reg: offset and length of the register block.
 - #address-cells: number of address cells for the USB channel subnodes, must
 		  be <1>.
@@ -34,7 +40,7 @@ the USB channel; see the selector meanings below:
 Example (Lager board):
 
 	usb-phy@...90100 {
-		compatible = "renesas,usb-phy-r8a7790";
+		compatible = "renesas,usb-phy-r8a7790", "renesas,rcar-gen2-usb-phy";
 		reg = <0 0xe6590100 0 0x100>;
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git a/drivers/phy/phy-rcar-gen2.c b/drivers/phy/phy-rcar-gen2.c
index c7a0599..97d4dd6 100644
--- a/drivers/phy/phy-rcar-gen2.c
+++ b/drivers/phy/phy-rcar-gen2.c
@@ -195,6 +195,7 @@ static const struct of_device_id rcar_gen2_phy_match_table[] = {
 	{ .compatible = "renesas,usb-phy-r8a7790" },
 	{ .compatible = "renesas,usb-phy-r8a7791" },
 	{ .compatible = "renesas,usb-phy-r8a7794" },
+	{ .compatible = "renesas,rcar-gen2-usb-phy" },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, rcar_gen2_phy_match_table);
-- 
1.7.9.5