Message-Id: <D3B4A169-777A-4235-B3C9-EBFA2117CE3D@holtmann.org>
Date:	Mon, 2 May 2016 10:43:13 -0700
From:	Marcel Holtmann <marcel@...tmann.org>
To:	Amitkumar Karwar <akarwar@...vell.com>
Cc:	linux-bluetooth@...r.kernel.org, linux-kernel@...r.kernel.org,
	Ganapathi Bhat <gbhat@...vell.com>
Subject: Re: [PATCH v9 3/3] Bluetooth: hci_uart: Support firmware download for Marvell

Hi Amitkumar,

> This patch implement firmware download feature for
> Marvell Bluetooth devices. If firmware is already
> downloaded, it will skip downloading.
> 
> Signed-off-by: Ganapathi Bhat <gbhat@...vell.com>
> Signed-off-by: Amitkumar Karwar <akarwar@...vell.com>
> ---
> v2: Fixed compilation warning reported by kbuild test robot
> v3: Addressed review comments from Marcel Holtmann
>   a) Removed vendor specific code from hci_ldisc.c
>   b) Get rid of static forward declaration
>   c) Removed unnecessary heavy nesting
>   d) Git rid of module parameter and global variables
>   e) Add logic to pick right firmware image
> v4: Addresses review comments from Alan
>   a) Use existing kernel helper APIs instead of writing own.
>   b) Replace mdelay() with msleep()
> v5: Addresses review comments from Loic Poulain
>   a) Use bt_dev_err/warn/dbg helpers insted of BT_ERR/WARN/DBG
>   b) Used static functions where required and removed forward delcarations
>   c) Edited comments for the function hci_uart_recv_data
>   d) Made HCI_UART_DNLD_FW flag a part of driver private data
> v6: Addresses review comments from Loic Poulain
>   a) Used skb instead of array to store firmware data during download
>   b) Used hci_uart_tx_wakeup and enqueued packets instead of tty write
>   c) Used GFP_KERNEL instead of GFP_ATOMIC
> v7: Edited Kconfig to add dependency for BT_HCIUART_H4. The change resolves
>    errors reported by kbuild test robot.
> v8: Addressed review comments from Marcel Holtmann
>   a) Removed unnecessary memory allocation failure messages
>   b) Get rid of btmrvl.h header file and add definitions in hci_mrvl.c file
> v9: Addressed review comments from Marcel Holtmann
>   a) Moved firmware download code from setup to prepare handler.
>   b) Change messages from bt_dev_*->BT_*, as hdev isn't available during firmware
>      download. 
> ---
> drivers/bluetooth/Kconfig     |  11 +
> drivers/bluetooth/Makefile    |   1 +
> drivers/bluetooth/hci_ldisc.c |   6 +
> drivers/bluetooth/hci_mrvl.c  | 547 ++++++++++++++++++++++++++++++++++++++++++
> drivers/bluetooth/hci_uart.h  |   8 +-
> 5 files changed, 572 insertions(+), 1 deletion(-)
> create mode 100644 drivers/bluetooth/hci_mrvl.c
> 
> diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig
> index cf50fd2..daafd0c 100644
> --- a/drivers/bluetooth/Kconfig
> +++ b/drivers/bluetooth/Kconfig
> @@ -180,6 +180,17 @@ config BT_HCIUART_AG6XX
> 
> 	  Say Y here to compile support for Intel AG6XX protocol.
> 
> +config BT_HCIUART_MRVL
> +	bool "Marvell protocol support"
> +	depends on BT_HCIUART
> +	select BT_HCIUART_H4
> +	help
> +	  Marvell is serial protocol for communication between Bluetooth
> +	  device and host. This protocol is required for most Marvell Bluetooth
> +	  devices with UART interface.
> +
> +	  Say Y here to compile support for HCI MRVL protocol.
> +
> config BT_HCIBCM203X
> 	tristate "HCI BCM203x USB driver"
> 	depends on USB
> diff --git a/drivers/bluetooth/Makefile b/drivers/bluetooth/Makefile
> index 9c18939..364dbb6 100644
> --- a/drivers/bluetooth/Makefile
> +++ b/drivers/bluetooth/Makefile
> @@ -37,6 +37,7 @@ hci_uart-$(CONFIG_BT_HCIUART_INTEL)	+= hci_intel.o
> hci_uart-$(CONFIG_BT_HCIUART_BCM)	+= hci_bcm.o
> hci_uart-$(CONFIG_BT_HCIUART_QCA)	+= hci_qca.o
> hci_uart-$(CONFIG_BT_HCIUART_AG6XX)	+= hci_ag6xx.o
> +hci_uart-$(CONFIG_BT_HCIUART_MRVL)	+= hci_mrvl.o
> hci_uart-objs				:= $(hci_uart-y)
> 
> ccflags-y += -D__CHECK_ENDIAN__
> diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c
> index 3ee8c0c..2b74c3a 100644
> --- a/drivers/bluetooth/hci_ldisc.c
> +++ b/drivers/bluetooth/hci_ldisc.c
> @@ -818,6 +818,9 @@ static int __init hci_uart_init(void)
> #ifdef CONFIG_BT_HCIUART_AG6XX
> 	ag6xx_init();
> #endif
> +#ifdef CONFIG_BT_HCIUART_MRVL
> +	mrvl_init();
> +#endif
> 
> 	return 0;
> }
> @@ -853,6 +856,9 @@ static void __exit hci_uart_exit(void)
> #ifdef CONFIG_BT_HCIUART_AG6XX
> 	ag6xx_deinit();
> #endif
> +#ifdef CONFIG_BT_HCIUART_MRVL
> +	mrvl_deinit();
> +#endif
> 
> 	/* Release tty registration of line discipline */
> 	err = tty_unregister_ldisc(N_HCI);
> diff --git a/drivers/bluetooth/hci_mrvl.c b/drivers/bluetooth/hci_mrvl.c
> new file mode 100644
> index 0000000..1475b34
> --- /dev/null
> +++ b/drivers/bluetooth/hci_mrvl.c
> @@ -0,0 +1,547 @@
> +/* Bluetooth HCI UART driver for Marvell devices
> + *
> + * Copyright (C) 2016, Marvell International Ltd.
> + *
> + *  Acknowledgements:
> + *  This file is based on hci_h4.c, which was written
> + *  by Maxim Krasnyansky and Marcel Holtmann.
> + *
> + * This software file (the "File") is distributed by Marvell International
> + * Ltd. under the terms of the GNU General Public License Version 2, June 1991
> + * (the "License").  You may use, redistribute and/or modify this File in
> + * accordance with the terms and conditions of the License, a copy of which
> + * is available on the worldwide web at
> + * http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
> + *
> + * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
> + * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
> + * ARE EXPRESSLY DISCLAIMED.  The License provides additional details about
> + * this warranty disclaimer.
> + */
> +
> +#include <linux/firmware.h>
> +#include <linux/tty.h>
> +#include <net/bluetooth/bluetooth.h>
> +#include <net/bluetooth/hci_core.h>
> +#include "hci_uart.h"
> +
> +struct fw_data {
> +	wait_queue_head_t init_wait_q;
> +	u8 wait_fw;
> +	int next_len;
> +	u8 five_bytes[5];
> +	u8 next_index;
> +	u8 last_ack;
> +	u8 expected_ack;
> +	struct ktermios old_termios;
> +	u8 chip_id;
> +	u8 chip_rev;
> +	struct sk_buff *skb;
> +};
> +
> +#define HCI_UART_DNLD_FW	0
> +#define MRVL_HELPER_NAME	"mrvl/helper_uart_3000000.bin"
> +#define MRVL_8997_CHIP_ID	0x50
> +#define MRVL_8997_FW_NAME	"mrvl/uart8997_bt.bin"
> +#define MRVL_MAX_FW_BLOCK_SIZE	1024
> +#define MRVL_MAX_RETRY_SEND	12
> +#define MRVL_DNLD_DELAY		100
> +#define MRVL_ACK		0x5A
> +#define MRVL_NAK		0xBF
> +#define MRVL_HDR_REQ_FW		0xA5
> +#define MRVL_HDR_CHIP_VER	0xAA
> +#define MRVL_HCI_OP_SET_BAUD	0xFC09
> +#define MRVL_FW_HDR_LEN		5
> +#define MRVL_WAIT_TIMEOUT	msecs_to_jiffies(12000)
> +
> +struct mrvl_data {
> +	struct sk_buff *rx_skb;
> +	struct sk_buff_head txq;
> +	struct fw_data *fwdata;
> +	unsigned long flags;
> +};
> +
> +static int get_cts(struct hci_uart *hu)
> +{
> +	struct tty_struct *tty = hu->tty;
> +	u32 state =  tty->ops->tiocmget(tty);
> +
> +	if (state & TIOCM_CTS) {
> +		bt_dev_dbg(hu->hdev, "CTS is low");
> +		return 1;
> +	}
> +	bt_dev_dbg(hu->hdev, "CTS is high");
> +
> +	return 0;
> +}
> +
> +/* Initialize protocol */
> +static int mrvl_open(struct hci_uart *hu)
> +{
> +	struct mrvl_data *mrvl;
> +
> +	bt_dev_dbg(hu->hdev, "hu %p", hu);
> +
> +	mrvl = kzalloc(sizeof(*mrvl), GFP_KERNEL);
> +	if (!mrvl)
> +		return -ENOMEM;
> +
> +	skb_queue_head_init(&mrvl->txq);
> +	hu->priv = mrvl;
> +
> +	return 0;
> +}
> +
> +/* Flush protocol data */
> +static int mrvl_flush(struct hci_uart *hu)
> +{
> +	struct mrvl_data *mrvl = hu->priv;
> +
> +	bt_dev_dbg(hu->hdev, "hu %p", hu);
> +
> +	skb_queue_purge(&mrvl->txq);
> +
> +	return 0;
> +}
> +
> +/* Close protocol */
> +static int mrvl_close(struct hci_uart *hu)
> +{
> +	struct mrvl_data *mrvl = hu->priv;
> +
> +	bt_dev_dbg(hu->hdev, "hu %p", hu);
> +
> +	skb_queue_purge(&mrvl->txq);
> +	kfree_skb(mrvl->rx_skb);
> +	kfree(mrvl->fwdata);

do you really want to keep the fwdata around until close? Wouldn't it be easier to just release it once firmware loading is done?

> +	hu->priv = NULL;
> +	kfree(mrvl);
> +
> +	return 0;
> +}
> +
> +/* Enqueue frame for transmittion (padding, crc, etc) */
> +static int mrvl_enqueue(struct hci_uart *hu, struct sk_buff *skb)
> +{
> +	struct mrvl_data *mrvl = hu->priv;
> +
> +	if (test_bit(HCI_UART_DNLD_FW, &mrvl->flags))
> +		return -EBUSY;

Can this still happen with the ->prepare callback? If so, then we still have not achieved much. We need to ensure that ->enqueue is protected and not called from hci_ldisc.c core.

> +
> +	bt_dev_dbg(hu->hdev, "hu %p skb %p", hu, skb);
> +
> +	/* Prepend skb with frame type */
> +	memcpy(skb_push(skb, 1), &hci_skb_pkt_type(skb), 1);
> +	skb_queue_tail(&mrvl->txq, skb);
> +
> +	return 0;
> +}
> +
> +static const struct h4_recv_pkt mrvl_recv_pkts[] = {
> +	{ H4_RECV_ACL,   .recv = hci_recv_frame },
> +	{ H4_RECV_SCO,   .recv = hci_recv_frame },
> +	{ H4_RECV_EVENT, .recv = hci_recv_frame },
> +};
> +
> +/* Send ACK/NAK to the device */
> +static void mrvl_send_ack(struct hci_uart *hu, unsigned char ack)
> +{
> +	struct tty_struct *tty = hu->tty;
> +
> +	tty->ops->write(tty, &ack, sizeof(ack));
> +}
> +
> +/* Validate the feedback data from device */
> +static void mrvl_pkt_complete(struct hci_uart *hu, struct sk_buff *skb)
> +{
> +	struct mrvl_data *mrvl = hu->priv;
> +	struct fw_data *fw_data = mrvl->fwdata;
> +	u8 buf[MRVL_FW_HDR_LEN];
> +	u16 lhs, rhs;
> +
> +	memcpy(buf, skb->data, skb->len);
> +
> +	lhs = le16_to_cpu(*((__le16 *)(&buf[1])));
> +	rhs = le16_to_cpu(*((__le16 *)(&buf[3])));

Don't we have proper get_unaligned_le16 helpers for this? And that also means you can operate directly only skb->data (after a length check of course).

> +	if ((lhs ^ rhs) == 0xffff) {
> +		mrvl_send_ack(hu, MRVL_ACK);
> +		fw_data->wait_fw = 1;
> +		fw_data->next_len = lhs;
> +		/*firmware download is done, send the last ack*/

Please fix the comment style here.

> +		if (!lhs)
> +			fw_data->last_ack = 1;
> +
> +		if (unlikely(fw_data->expected_ack == MRVL_HDR_CHIP_VER)) {

Drop the unlikely. That is kind pointless.

> +			fw_data->chip_id = *((u8 *)(&buf[1]));
> +			fw_data->chip_rev = *((u8 *)(&buf[2]));

I would access skb->data directly and even if not, buf is already u8.

> +		}
> +		wake_up_interruptible(&fw_data->init_wait_q);
> +	} else {
> +		mrvl_send_ack(hu, MRVL_NAK);
> +	}
> +}
> +
> +/* This function receives data from the uart device during firmware download.
> + * Driver expects 5 bytes of data as per the protocal in the below format:
> + * <HEADER><BYTE_1><BYTE_2><BYTE_3><BYTE_4>
> + * BYTE_3 and BYTE_4 are compliment of BYTE_1 an BYTE_2. Data can come in chunks
> + * of any length. If length received is < 5, accumulate the data in an array,
> + * until we have a sequence of 5 bytes, starting with the expected HEADER. If
> + * the length received is > 5  bytes, then get the first 5 bytes, starting with
> + * the HEADER and process the same, ignoring the rest of the bytes as per the
> + * protocal.
> + */
> +static struct sk_buff *mrvl_process_fw_data(struct hci_uart *hu,
> +					    struct sk_buff *skb,
> +					    u8 *buf, int count)
> +{
> +	struct mrvl_data *mrvl = hu->priv;
> +	struct fw_data *fw_data = mrvl->fwdata;
> +	int i = 0, len;
> +
> +	if (!skb) {
> +		while (buf[i] != fw_data->expected_ack && i < count)
> +			i++;
> +		if (i == count)
> +			return ERR_PTR(-EILSEQ);
> +
> +		skb = bt_skb_alloc(MRVL_FW_HDR_LEN, GFP_KERNEL);
> +	}
> +
> +	if (!skb)
> +		return ERR_PTR(-ENOMEM);
> +
> +	len = count - i;
> +	memcpy(skb_put(skb, len), &buf[i], len);
> +
> +	if (skb->len == MRVL_FW_HDR_LEN) {
> +		mrvl_pkt_complete(hu, skb);
> +		kfree_skb(skb);
> +		skb = NULL;
> +	}
> +
> +	return skb;
> +}
> +
> +/* Receive data */
> +static int mrvl_recv(struct hci_uart *hu, const void *data, int count)
> +{
> +	struct mrvl_data *mrvl = hu->priv;
> +
> +	if (test_bit(HCI_UART_DNLD_FW, &mrvl->flags)) {
> +		mrvl->fwdata->skb = mrvl_process_fw_data(hu, mrvl->fwdata->skb,
> +							 (u8 *)data, count);
> +		if (IS_ERR(mrvl->fwdata->skb)) {
> +			int err = PTR_ERR(mrvl->fwdata->skb);
> +
> +			bt_dev_err(hu->hdev,
> +				   "Receive firmware data failed (%d)", err);
> +			mrvl->fwdata->skb = NULL;
> +			return err;
> +		}
> +		return 0;
> +	}

So I really want to get rid of this part in the driver ->recv should be kept compartmentalized between before HCI is ready and when HCI is ready.

> +
> +	if (!test_bit(HCI_UART_REGISTERED, &hu->flags))
> +		return -EUNATCH;
> +
> +	mrvl->rx_skb = h4_recv_buf(hu->hdev, mrvl->rx_skb, data, count,
> +				   mrvl_recv_pkts, ARRAY_SIZE(mrvl_recv_pkts));
> +	if (IS_ERR(mrvl->rx_skb)) {
> +		int err = PTR_ERR(mrvl->rx_skb);
> +
> +		bt_dev_err(hu->hdev, "Frame reassembly failed (%d)", err);
> +		mrvl->rx_skb = NULL;
> +		return err;
> +	}
> +
> +	return count;
> +}
> +
> +static struct sk_buff *mrvl_dequeue(struct hci_uart *hu)
> +{
> +	struct mrvl_data *mrvl = hu->priv;
> +
> +	return skb_dequeue(&mrvl->txq);
> +}
> +
> +static int mrvl_init_fw_data(struct hci_uart *hu)
> +{
> +	struct fw_data *fwdata;
> +	struct mrvl_data *mrvl = hu->priv;
> +
> +	fwdata = kzalloc(sizeof(*fwdata), GFP_KERNEL);
> +	if (!fwdata)
> +		return -ENOMEM;
> +
> +	mrvl->fwdata = fwdata;
> +	init_waitqueue_head(&fwdata->init_wait_q);
> +
> +	return 0;
> +}
> +
> +/* Wait for the header from device */
> +static int mrvl_wait_for_hdr(struct hci_uart *hu, u8 header)
> +{
> +	struct mrvl_data *mrvl = hu->priv;
> +	struct fw_data *fw_data = mrvl->fwdata;
> +
> +	fw_data->expected_ack = header;
> +	fw_data->wait_fw = 0;
> +
> +	if (!wait_event_interruptible_timeout(fw_data->init_wait_q,
> +					      fw_data->wait_fw,
> +					      MRVL_WAIT_TIMEOUT)) {
> +		BT_ERR("TIMEOUT, waiting for:0x%x", fw_data->expected_ack);
> +		return -1;
> +	}
> +
> +	return 0;
> +}
> +
> +/* Send bytes to device */
> +static int mrvl_send_data(struct hci_uart *hu, struct sk_buff *skb)
> +{
> +	struct mrvl_data *mrvl = hu->priv;
> +
> +	skb_queue_head(&mrvl->txq, skb);
> +	hci_uart_tx_wakeup(hu);
> +
> +	if (mrvl_wait_for_hdr(hu, MRVL_HDR_REQ_FW) == -1)
> +		return -1;
> +
> +	return 0;
> +}
> +
> +/* Download firmware to the device */
> +static int mrvl_dnld_fw(struct hci_uart *hu, const char *file_name)
> +{
> +	const struct firmware *fw = NULL;
> +	struct sk_buff *skb = NULL;
> +	int offset = 0;
> +	int ret, tx_len;
> +	struct mrvl_data *mrvl = hu->priv;
> +	struct fw_data *fw_data = mrvl->fwdata;
> +
> +	ret = request_firmware(&fw, file_name, hu->tty->dev);
> +	if (ret < 0) {
> +		BT_ERR("request_firmware() failed");
> +		return -1;
> +	}
> +
> +	BT_INFO("Downloading FW (%d bytes)", (u16)fw->size);
> +
> +	fw_data->last_ack = 0;
> +
> +	do {
> +		if ((offset >= fw->size) || (fw_data->last_ack))
> +			break;
> +		tx_len = fw_data->next_len;
> +		if ((fw->size - offset) < tx_len)
> +			tx_len = fw->size - offset;
> +
> +		skb = bt_skb_alloc(MRVL_MAX_FW_BLOCK_SIZE, GFP_KERNEL);
> +		if (!skb) {
> +			ret = -1;
> +			goto done;
> +		}
> +
> +		memcpy(skb->data, &fw->data[offset], tx_len);
> +		skb_put(skb, tx_len);
> +		if (mrvl_send_data(hu, skb) != 0) {
> +			BT_ERR("fail to download firmware");
> +			ret = -1;
> +			goto done;
> +		}
> +		offset += tx_len;
> +	} while (1);

Use a while(1) { } loop here instead. It is easier on the eyes and has the same semantics. I prefer we only do { } while if you actually have an exit condition.

> +
> +	BT_INFO("downloaded %d byte firmware", offset);
> +done:
> +	release_firmware(fw);
> +
> +	return ret;
> +}
> +
> +/* Set the baud rate */
> +static int mrvl_set_dev_baud(struct hci_uart *hu)
> +{
> +	struct hci_dev *hdev = hu->hdev;
> +	struct sk_buff *skb;
> +	static const u8 baud_param[] = { 0xc0, 0xc6, 0x2d, 0x00 };
> +	int err;
> +
> +	skb = __hci_cmd_sync(hdev, MRVL_HCI_OP_SET_BAUD, sizeof(baud_param),
> +			     baud_param, HCI_INIT_TIMEOUT);
> +	if (IS_ERR(skb)) {
> +		err = PTR_ERR(skb);
> +		bt_dev_err(hu->hdev, "Set device baudrate failed (%d)", err);
> +		return err;
> +	}
> +	kfree_skb(skb);
> +
> +	return 0;
> +}
> +
> +/* Reset device */
> +static int mrvl_reset(struct hci_uart *hu)
> +{
> +	struct hci_dev *hdev = hu->hdev;
> +	struct sk_buff *skb;
> +	int err;
> +
> +	skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_CMD_TIMEOUT);
> +	if (IS_ERR(skb)) {
> +		err = PTR_ERR(skb);
> +		bt_dev_err(hu->hdev, "Reset device failed (%d)", err);
> +		return err;
> +	}
> +	kfree_skb(skb);
> +
> +	return 0;
> +}
> +
> +static int mrvl_set_baud(struct hci_uart *hu)
> +{
> +	int err;
> +
> +	hci_uart_set_baudrate(hu, 115200);
> +	hci_uart_set_flow_control(hu, false);
> +
> +	err = mrvl_reset(hu);
> +	if (err)
> +		goto set_term_baud;
> +	else
> +		goto set_dev_baud;
> +
> +set_dev_baud:
> +	err = mrvl_set_dev_baud(hu);
> +	if (err)
> +		return -1;
> +
> +set_term_baud:

Please get rid of the labels here and do a proper if err then return structuring of the function. You are overdoing it with labels and goto here.

Also is the mrvl_set_baud function actually used? Looks to me that should be just folded into the ->setup call.

> +	hci_uart_set_baudrate(hu, 3000000);
> +	hci_uart_set_flow_control(hu, false);
> +
> +	msleep(MRVL_DNLD_DELAY);
> +
> +	return 0;
> +}
> +
> +static int mrvl_get_fw_name(struct hci_uart *hu, char *fw_name)
> +{
> +	struct mrvl_data *mrvl = hu->priv;
> +	struct fw_data *fw_data = mrvl->fwdata;
> +
> +	if (mrvl_wait_for_hdr(hu, MRVL_HDR_CHIP_VER) != 0) {
> +		BT_ERR("Could not read chip id and revision");
> +		return -1;
> +	}
> +
> +	BT_DBG("chip_id=0x%x, chip_rev=0x%x",
> +	       fw_data->chip_id, fw_data->chip_rev);
> +
> +	switch (fw_data->chip_id) {
> +	case MRVL_8997_CHIP_ID:
> +		memcpy(fw_name, MRVL_8997_FW_NAME, sizeof(MRVL_8997_FW_NAME));
> +		return 0;
> +	default:
> +		BT_ERR("Invalid chip id");
> +		return -1;
> +	}
> +}
> +
> +/* Download helper and firmare to device */
> +static int hci_uart_dnld_fw(struct hci_uart *hu)
> +{
> +	struct tty_struct *tty = hu->tty;
> +	struct ktermios new_termios;
> +	struct ktermios old_termios;
> +	struct mrvl_data *mrvl = hu->priv;
> +	char fw_name[128];
> +	int ret;
> +
> +	old_termios = tty->termios;
> +
> +	if (get_cts(hu)) {
> +		BT_INFO("fw is running");
> +		clear_bit(HCI_UART_DNLD_FW, &mrvl->flags);
> +		return 0;
> +	}
> +
> +	hci_uart_set_baudrate(hu, 115200);
> +	hci_uart_set_flow_control(hu, true);
> +
> +	ret = mrvl_wait_for_hdr(hu, MRVL_HDR_REQ_FW);
> +	if (ret)
> +		goto fail;
> +
> +	ret = mrvl_dnld_fw(hu, MRVL_HELPER_NAME);
> +	if (ret)
> +		goto fail;
> +
> +	msleep(MRVL_DNLD_DELAY);
> +
> +	hci_uart_set_baudrate(hu, 3000000);
> +	hci_uart_set_flow_control(hu, false);
> +
> +	ret = mrvl_get_fw_name(hu, fw_name);
> +	if (ret)
> +		goto fail;
> +
> +	ret = mrvl_wait_for_hdr(hu, MRVL_HDR_REQ_FW);
> +	if (ret)
> +		goto fail;
> +
> +	ret = mrvl_dnld_fw(hu, fw_name);
> +	if (ret)
> +		goto fail;
> +
> +	msleep(MRVL_DNLD_DELAY);
> +fail:
> +	/* restore uart settings */
> +	new_termios = tty->termios;
> +	tty->termios.c_cflag = old_termios.c_cflag;
> +	tty_set_termios(tty, &new_termios);
> +	clear_bit(HCI_UART_DNLD_FW, &mrvl->flags);
> +
> +	return ret;
> +}
> +
> +static int mrvl_setup(struct hci_uart *hu)
> +{
> +	return mrvl_set_baud(hu);
> +}
> +
> +static int mrvl_prepare(struct hci_uart *hu)
> +{
> +	struct mrvl_data *mrvl = hu->priv;
> +
> +	mrvl_init_fw_data(hu);
> +	set_bit(HCI_UART_DNLD_FW, &mrvl->flags);
> +
> +	return hci_uart_dnld_fw(hu);
> +}
> +
> +static const struct hci_uart_proto mrvlp = {
> +	.id		= HCI_UART_MRVL,
> +	.name		= "MRVL",
> +	.open		= mrvl_open,
> +	.close		= mrvl_close,
> +	.recv		= mrvl_recv,
> +	.enqueue	= mrvl_enqueue,
> +	.dequeue	= mrvl_dequeue,
> +	.flush		= mrvl_flush,
> +	.setup		= mrvl_setup,
> +	.prepare	= mrvl_prepare,
> +};
> +
> +int __init mrvl_init(void)
> +{
> +	return hci_uart_register_proto(&mrvlp);
> +}
> +
> +int __exit mrvl_deinit(void)
> +{
> +	return hci_uart_unregister_proto(&mrvlp);
> +}
> diff --git a/drivers/bluetooth/hci_uart.h b/drivers/bluetooth/hci_uart.h
> index ad4d66b..57d3356 100644
> --- a/drivers/bluetooth/hci_uart.h
> +++ b/drivers/bluetooth/hci_uart.h
> @@ -35,7 +35,7 @@
> #define HCIUARTGETFLAGS		_IOR('U', 204, int)
> 
> /* UART protocols */
> -#define HCI_UART_MAX_PROTO	10
> +#define HCI_UART_MAX_PROTO	11
> 
> #define HCI_UART_H4	0
> #define HCI_UART_BCSP	1
> @@ -47,6 +47,7 @@
> #define HCI_UART_BCM	7
> #define HCI_UART_QCA	8
> #define HCI_UART_AG6XX	9
> +#define HCI_UART_MRVL	10
> 
> #define HCI_UART_RAW_DEVICE	0
> #define HCI_UART_RESET_ON_INIT	1
> @@ -190,3 +191,8 @@ int qca_deinit(void);
> int ag6xx_init(void);
> int ag6xx_deinit(void);
> #endif
> +
> +#ifdef CONFIG_BT_HCIUART_MRVL
> +int mrvl_init(void);
> +int mrvl_deinit(void);
> +#endif

Regards

Marcel

Powered by blists - more mailing lists