| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <57279710.3080005@linaro.org>
Date: Mon, 2 May 2016 19:06:08 +0100
From: Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
To: Stefan Wahren <stefan.wahren@...e.com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Cc: linux-mediatek@...ts.infradead.org, linux-kernel@...r.kernel.org,
Maxime Ripard <maxime.ripard@...e-electrons.com>,
linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH v2 2/2] nvmem: mxs-ocotp: remove nvmem regmap dependency
On 02/05/16 17:26, Stefan Wahren wrote:
> Hi Srinivas,
>
> unfortunately still some points from V1.
Thanks for reviewing.
Oops, Will take care of them in v3.
thanks,
srini
>
>> Srinivas Kandagatla <srinivas.kandagatla@...aro.org> hat am 2. Mai 2016 um
>> 17:22 geschrieben:
>>
>> This patch moves to nvmem support in the driver to use callback
>> instead of regmap.
>>
>> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
>> ---
>> drivers/nvmem/mxs-ocotp.c | 81
>> +++++++++++++----------------------------------
>> 1 file changed, 22 insertions(+), 59 deletions(-)
>>
>> diff --git a/drivers/nvmem/mxs-ocotp.c b/drivers/nvmem/mxs-ocotp.c
>> index 2bb3c57..9bf59d6 100644
>> --- a/drivers/nvmem/mxs-ocotp.c
>> +++ b/drivers/nvmem/mxs-ocotp.c
>> @@ -25,7 +25,6 @@
>> #include <linux/nvmem-provider.h>
>> #include <linux/of_device.h>
>> #include <linux/platform_device.h>
>> -#include <linux/regmap.h>
>> #include <linux/slab.h>
>> #include <linux/stmp_device.h>
>>
>> @@ -66,11 +65,10 @@ static int mxs_ocotp_wait(struct mxs_ocotp *otp)
>> return 0;
>> }
>>
>> -static int mxs_ocotp_read(void *context, const void *reg, size_t reg_size,
>> - void *val, size_t val_size)
>> +static int mxs_ocotp_read(void *context, unsigned int offset,
>> + void *val, size_t bytes)
>> {
>> struct mxs_ocotp *otp = context;
>> - unsigned int offset = *(u32 *)reg;
>> u32 *buf = val;
>> int ret;
>>
>> @@ -94,17 +92,16 @@ static int mxs_ocotp_read(void *context, const void *reg,
>> size_t reg_size,
>> if (ret)
>> goto close_banks;
>>
>> - while (val_size >= reg_size) {
>> + while (bytes) {
>> if ((offset < OCOTP_DATA_OFFSET) || (offset % 16)) {
>> /* fill up non-data register */
>> - *buf = 0;
>> + *buf++ = 0;
>> } else {
>> - *buf = readl(otp->base + offset);
>> + *buf++ = readl(otp->base + offset);
>> }
>>
>> - buf++;
>> - val_size -= reg_size;
>> - offset += reg_size;
>> + bytes -= 4;
>> + offset += 4;
>> }
>>
>> close_banks:
>> @@ -117,57 +114,29 @@ disable_clk:
>> return ret;
>> }
>>
>> -static int mxs_ocotp_write(void *context, const void *data, size_t count)
>> -{
>> - /* We don't want to support writing */
>> - return 0;
>> -}
>> -
>> -static bool mxs_ocotp_writeable_reg(struct device *dev, unsigned int reg)
>> -{
>> - return false;
>> -}
>> -
>> static struct nvmem_config ocotp_config = {
>> .name = "mxs-ocotp",
>> + .stride = 16,
>> + .word_size = 4,
>> .owner = THIS_MODULE,
>> + .reg_read = mxs_ocotp_read,
>> };
>>
>> -static const struct regmap_range imx23_ranges[] = {
>> - regmap_reg_range(OCOTP_DATA_OFFSET, 0x210),
>> -};
>> -
>> -static const struct regmap_access_table imx23_access = {
>> - .yes_ranges = imx23_ranges,
>> - .n_yes_ranges = ARRAY_SIZE(imx23_ranges),
>> -};
>> -
>> -static const struct regmap_range imx28_ranges[] = {
>> - regmap_reg_range(OCOTP_DATA_OFFSET, 0x290),
>> -};
>> -
>> -static const struct regmap_access_table imx28_access = {
>> - .yes_ranges = imx28_ranges,
>> - .n_yes_ranges = ARRAY_SIZE(imx28_ranges),
>> +struct mxs_data {
>> + int size;
>> };
>>
>> -static struct regmap_bus mxs_ocotp_bus = {
>> - .read = mxs_ocotp_read,
>> - .write = mxs_ocotp_write, /* make regmap_init() happy */
>> - .reg_format_endian_default = REGMAP_ENDIAN_NATIVE,
>> - .val_format_endian_default = REGMAP_ENDIAN_NATIVE,
>> +static const struct mxs_data imx23_data = {
>> + .size = 0x210,
>
> 0x220
>
> because the regmap_reg_range defined the max register instead of size.
>
>> };
>>
>> -static struct regmap_config mxs_ocotp_config = {
>> - .reg_bits = 32,
>> - .val_bits = 32,
>> - .reg_stride = 16,
>> - .writeable_reg = mxs_ocotp_writeable_reg,
>> +static const struct mxs_data imx28_data = {
>> + .size = 0x290,
>
> 0x2a0
>
> ditto
>
>> };
>>
>> static const struct of_device_id mxs_ocotp_match[] = {
>> - { .compatible = "fsl,imx23-ocotp", .data = &imx23_access },
>> - { .compatible = "fsl,imx28-ocotp", .data = &imx28_access },
>> + { .compatible = "fsl,imx23-ocotp", .data = &imx23_data },
>> + { .compatible = "fsl,imx28-ocotp", .data = &imx23_data },
>
> s/imx23_data/imx28_data/
>
>> { /* sentinel */},
>> };
>> MODULE_DEVICE_TABLE(of, mxs_ocotp_match);
>> @@ -175,6 +144,7 @@ MODULE_DEVICE_TABLE(of, mxs_ocotp_match);
>> static int mxs_ocotp_probe(struct platform_device *pdev)
>> {
>> struct device *dev = &pdev->dev;
>> + struct mxs_data *data;
>
> I made this "const" in order to avoid a compiler warning below.
>
> Stefan
>
>> struct mxs_ocotp *otp;
>> struct resource *res;
>> const struct of_device_id *match;
>> @@ -205,17 +175,10 @@ static int mxs_ocotp_probe(struct platform_device *pdev)
>> return ret;
>> }
>>
>> - access = match->data;
>> - mxs_ocotp_config.rd_table = access;
>> - mxs_ocotp_config.max_register = access->yes_ranges[0].range_max;
>> -
>> - regmap = devm_regmap_init(dev, &mxs_ocotp_bus, otp, &mxs_ocotp_config);
>> - if (IS_ERR(regmap)) {
>> - dev_err(dev, "regmap init failed\n");
>> - ret = PTR_ERR(regmap);
>> - goto err_clk;
>> - }
>> + data = match->data;
>>
>> + ocotp_config.size = data->size;
>> + ocotp_config.priv = otp;
>> ocotp_config.dev = dev;
>> otp->nvmem = nvmem_register(&ocotp_config);
>> if (IS_ERR(otp->nvmem)) {
>> --
>> 2.5.0
Powered by blists - more mailing lists