[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1462270527-17074-1-git-send-email-van.freenix@gmail.com>
Date: Tue, 3 May 2016 18:15:27 +0800
From: Peng Fan <van.freenix@...il.com>
To: will.deacon@....com
Cc: robin.murphy@....com, joro@...tes.org,
linux-arm-kernel@...ts.infradead.org,
iommu@...ts.linux-foundation.org, linux-kernel@...r.kernel.org,
van.freenix@...il.com
Subject: [PATCH] iommu/arm-smmu: clear cache lock bit of ACR
According MMU-500 TRM, section 3.7.1 Auxiliary Control registers,
You can modify ACTLR only when the ACR.CACHE_LOCK bit is 0.
So before clearing ARM_MMU500_ACTLR_CPRE of each context bank,
need clear CACHE_LOCK bit of ACR register first.
Signed-off-by: Peng Fan <van.freenix@...il.com>
Cc: Will Deacon <will.deacon@....com>
Cc: Robin Murphy <robin.murphy@....com>
---
Hi Will,
Patch based on iommu/devel branch.
drivers/iommu/arm-smmu.c | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/drivers/iommu/arm-smmu.c b/drivers/iommu/arm-smmu.c
index acff332..d094a5a 100644
--- a/drivers/iommu/arm-smmu.c
+++ b/drivers/iommu/arm-smmu.c
@@ -98,6 +98,9 @@
#define sCR0_BSU_SHIFT 14
#define sCR0_BSU_MASK 0x3
+/* Auxiliary Configuration register */
+#define ARM_SMMU_GR0_sACR 0x10
+
/* Identification registers */
#define ARM_SMMU_GR0_ID0 0x20
#define ARM_SMMU_GR0_ID1 0x24
@@ -235,6 +238,8 @@
#define ARM_MMU500_ACTLR_CPRE (1 << 1)
+#define ARM_MMU500_ACR_CACHE_LOCK (1 << 26)
+
#define CB_PAR_F (1 << 0)
#define ATSR_ACTIVE (1 << 0)
@@ -1506,6 +1511,16 @@ static void arm_smmu_device_reset(struct arm_smmu_device *smmu)
writel_relaxed(reg, gr0_base + ARM_SMMU_GR0_S2CR(i));
}
+ /*
+ * Before clearing ARM_MMU500_ACTLR_CPRE, need to
+ * clear CACHE_LOCK bit of ACR first.
+ */
+ if (smmu->model == ARM_MMU500) {
+ reg = readl_relaxed(gr0_base + ARM_SMMU_GR0_sACR);
+ reg &= ~ARM_MMU500_ACR_CACHE_LOCK;
+ writel_relaxed(reg, gr0_base + ARM_SMMU_GR0_sACR);
+ }
+
/* Make sure all context banks are disabled and clear CB_FSR */
for (i = 0; i < smmu->num_context_banks; ++i) {
cb_base = ARM_SMMU_CB_BASE(smmu) + ARM_SMMU_CB(smmu, i);
--
2.6.2
Powered by blists - more mailing lists