[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <572957F4.1030406@roeck-us.net>
Date: Tue, 3 May 2016 19:01:24 -0700
From: Guenter Roeck <linux@...ck-us.net>
To: Grant Grundler <grundler@...omium.org>
Cc: Guenter Roeck <groeck@...omium.org>,
Wim Van Sebroeck <wim@...ana.be>,
linux-watchdog@...r.kernel.org, LKML <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH] watchdog: qcom: Report reboot reason
On 05/03/2016 06:36 PM, Grant Grundler wrote:
> Ping? Did this change get accepted?
>
Hi Grant,
Should be. It is in my watchdog-next branch. I plan to send
a pull request to Wim early next week.
Guenter
> cheers,
> grant
>
> On Tue, Apr 5, 2016 at 12:07 PM, Grant Grundler <grundler@...omium.org> wrote:
>> On Mon, Apr 4, 2016 at 5:37 PM, Guenter Roeck <groeck@...omium.org> wrote:
>>> The Qualcom watchdog timer block reports if the system was reset by the
>>> watchdog. Pass the information to user space.
>>>
>>> Cc: Grant Grundler <grundler@...omium.org>
>>> Signed-off-by: Guenter Roeck <groeck@...omium.org>
>>
>> Reviewed-by: Grant Grundler <grundler@...omium.org>
>> Tested-by: Grant Grundler <grundler@...omium.org>
>>
>> Thanks Guenter! :)
>>
>> FTR, this landed in the chromeos-3.14 (and chromeos-3.18 shortly)
>> branches and will be included in a future update for TP-Link Onhub
>> devices.
>>
>> cheers,
>> grant
>>
>>> ---
>>> drivers/watchdog/qcom-wdt.c | 7 ++++++-
>>> 1 file changed, 6 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/drivers/watchdog/qcom-wdt.c b/drivers/watchdog/qcom-wdt.c
>>> index 20563cc..a043fa4 100644
>>> --- a/drivers/watchdog/qcom-wdt.c
>>> +++ b/drivers/watchdog/qcom-wdt.c
>>> @@ -21,6 +21,7 @@
>>>
>>> #define WDT_RST 0x38
>>> #define WDT_EN 0x40
>>> +#define WDT_STS 0x44
>>> #define WDT_BITE_TIME 0x5C
>>>
>>> struct qcom_wdt {
>>> @@ -108,7 +109,8 @@ static const struct watchdog_ops qcom_wdt_ops = {
>>> static const struct watchdog_info qcom_wdt_info = {
>>> .options = WDIOF_KEEPALIVEPING
>>> | WDIOF_MAGICCLOSE
>>> - | WDIOF_SETTIMEOUT,
>>> + | WDIOF_SETTIMEOUT
>>> + | WDIOF_CARDRESET,
>>> .identity = KBUILD_MODNAME,
>>> };
>>>
>>> @@ -171,6 +173,9 @@ static int qcom_wdt_probe(struct platform_device *pdev)
>>> wdt->wdd.max_timeout = 0x10000000U / wdt->rate;
>>> wdt->wdd.parent = &pdev->dev;
>>>
>>> + if (readl(wdt->base + WDT_STS) & 1)
>>> + wdt->wdd.bootstatus = WDIOF_CARDRESET;
>>> +
>>> /*
>>> * If 'timeout-sec' unspecified in devicetree, assume a 30 second
>>> * default, unless the max timeout is less than 30 seconds, then use
>>> --
>>> 2.8.0.rc3.226.g39d4020
>>>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-watchdog" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
Powered by blists - more mailing lists