linux-kernel - [PATCH V3 01/17] irqchip/gic: Don't unnecessarily write the IRQ configuration

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1462379130-11742-2-git-send-email-jonathanh@nvidia.com>
Date:	Wed, 4 May 2016 17:25:14 +0100
From:	Jon Hunter <jonathanh@...dia.com>
To:	Thomas Gleixner <tglx@...utronix.de>,
	Jason Cooper <jason@...edaemon.net>,
	Marc Zyngier <marc.zyngier@....com>,
	Rob Herring <robh+dt@...nel.org>,
	Pawel Moll <pawel.moll@....com>,
	Mark Rutland <mark.rutland@....com>,
	Ian Campbell <ijc+devicetree@...lion.org.uk>,
	Kumar Gala <galak@...eaurora.org>,
	Stephen Warren <swarren@...dotorg.org>,
	Thierry Reding <thierry.reding@...il.com>
CC:	Kevin Hilman <khilman@...nel.org>,
	Geert Uytterhoeven <geert@...ux-m68k.org>,
	Grygorii Strashko <grygorii.strashko@...com>,
	Lars-Peter Clausen <lars@...afoo.de>,
	Linus Walleij <linus.walleij@...aro.org>,
	<linux-tegra@...r.kernel.org>, <linux-omap@...r.kernel.org>,
	<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
	Jon Hunter <jonathanh@...dia.com>
Subject: [PATCH V3 01/17] irqchip/gic: Don't unnecessarily write the IRQ configuration

If the interrupt configuration matches the current configuration, then
don't bother writing the configuration again.

Signed-off-by: Jon Hunter <jonathanh@...dia.com>
Acked-by: Marc Zyngier <marc.zyngier@....com>
---
 drivers/irqchip/irq-gic-common.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/irqchip/irq-gic-common.c b/drivers/irqchip/irq-gic-common.c
index f174ce0ca361..ffff5a45f1e3 100644
--- a/drivers/irqchip/irq-gic-common.c
+++ b/drivers/irqchip/irq-gic-common.c
@@ -50,13 +50,17 @@ int gic_configure_irq(unsigned int irq, unsigned int type,
 	else if (type & IRQ_TYPE_EDGE_BOTH)
 		val |= confmask;
 
+	/* If the current configuration is the same, then we are done */
+	if (val == oldval)
+		return 0;
+
 	/*
 	 * Write back the new configuration, and possibly re-enable
-	 * the interrupt. If we tried to write a new configuration and failed,
+	 * the interrupt. If we fail to write a new configuration,
 	 * return an error.
 	 */
 	writel_relaxed(val, base + GIC_DIST_CONFIG + confoff);
-	if (readl_relaxed(base + GIC_DIST_CONFIG + confoff) != val && val != oldval)
+	if (readl_relaxed(base + GIC_DIST_CONFIG + confoff) != val)
 		ret = -EINVAL;
 
 	if (sync_access)
-- 
2.1.4