lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1462386884-16380-2-git-send-email-fcooper@ti.com>
Date:	Wed,  4 May 2016 13:34:43 -0500
From:	Franklin S Cooper Jr <fcooper@...com>
To:	robh+dt@...nel.org, boris.brezillon@...e-electrons.com,
	richard@....at, dwmw2@...radead.org, computersforpeace@...il.com,
	rogerq@...com, tony@...mide.com, devicetree@...r.kernel.org,
	linux-kernel@...r.kernel.org, linux-mtd@...ts.infradead.org,
	vigneshr@...com, nsekhar@...com
Cc:	Franklin S Cooper Jr <fcooper@...com>
Subject: [PATCH v2 1/2] mtd: nand: omap2: Support parsing dma channel information from DT

Switch from dma_request_channel to allow passing dma channel
information from DT rather than hardcoding a value.

Also provide a handle to the GPMC's dev so it can be used to parse the DMA
channel information within the GPMC's DT node.

Performance Numbers via mtd_speedtest now that EDMA based prefetch works:

AM335x Performance numbers:
DMA
  CPULOAD Write: 54%  Read: 35%
  page write speed	-23% (vs non dma)
  page read speed	-35% (vs non dma)

NO DMA (prefetch-polled)
  CPULOAD Write: 98%  Read: 98%

AM437x Performance numbers:
DMA
  CPU LOAD Write: 56% Read: 36%
  page write speed	-16% (vs non dma)
  page read speed	-22% (vs non dma)

NO DMA (prefetch-polled)
  CPULOAD Write: 93%  Read: 93%

Signed-off-by: Franklin S Cooper Jr <fcooper@...com>
---
 drivers/mtd/nand/omap2.c | 7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
index 08e1588..83b9091 100644
--- a/drivers/mtd/nand/omap2.c
+++ b/drivers/mtd/nand/omap2.c
@@ -118,8 +118,6 @@
 #define	PREFETCH_STATUS_FIFO_CNT(val)	((val >> 24) & 0x7F)
 #define	STATUS_BUFF_EMPTY		0x00000001
 
-#define OMAP24XX_DMA_GPMC		4
-
 #define SECTOR_BYTES		512
 /* 4 bit padding to make byte aligned, 56 = 52 + 4 */
 #define BCH4_BIT_PAD		4
@@ -1808,7 +1806,6 @@ static int omap_nand_probe(struct platform_device *pdev)
 	struct nand_chip		*nand_chip;
 	int				err;
 	dma_cap_mask_t			mask;
-	unsigned			sig;
 	struct resource			*res;
 	struct device			*dev = &pdev->dev;
 	int				min_oobbytes = BADBLOCK_MARKER_LENGTH;
@@ -1921,8 +1918,8 @@ static int omap_nand_probe(struct platform_device *pdev)
 	case NAND_OMAP_PREFETCH_DMA:
 		dma_cap_zero(mask);
 		dma_cap_set(DMA_SLAVE, mask);
-		sig = OMAP24XX_DMA_GPMC;
-		info->dma = dma_request_channel(mask, omap_dma_filter_fn, &sig);
+		info->dma = dma_request_chan(pdev->dev.parent, "rxtx");
+
 		if (!info->dma) {
 			dev_err(&pdev->dev, "DMA engine request failed\n");
 			err = -ENXIO;
-- 
2.7.0

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ