[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Date: Thu, 05 May 2016 09:23:24 -0700
From: Stefan Agner <stefan@...er.ch>
To: Stefan Agner <stefan@...er.ch>
Cc: dri-devel@...ts.freedesktop.org, thierry.reding@...il.com,
airlied@...ux.ie, daniel.vetter@...ll.ch,
jianwei.wang.chn@...il.com, alison.wang@...escale.com,
meng.yi@....com, linux@....linux.org.uk, p.zabel@...gutronix.de,
denis@...rea.com, eric@...rea.com, ville.syrjala@...ux.intel.com,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH RESEND v3 1/2] drm: introduce bus_flags in
drm_display_info
On 2016-05-05 03:06, Daniel Vetter wrote:
> On Wed, May 04, 2016 at 10:08:59PM -0700, Stefan Agner wrote:
>> Introduce bus_flags to specify display bus properties like signal
>> polarities. This is useful for parallel display buses, e.g. to
>> specify the pixel clock or data enable polarity.
>>
>> Suggested-by: Thierry Reding <thierry.reding@...il.com>
>> Acked-by: Philipp Zabel <p.zabel@...gutronix.de>
>> Acked-by: Manfred Schlaegl <manfred.schlaegl@....at>
>> Acked-by: Daniel Vetter <daniel.vetter@...ll.ch>
>> Signed-off-by: Stefan Agner <stefan@...er.ch>
>
> In case this wasn't clear: That ack is good enough to just smash this
> patch into your fsl-dcu tree and send a pull request to Dave for it. No
> need to resend the patches. Just mention in the pull that you have stuff
> included outside of your driver, and that it's all acked.
> -Daniel
I almost suspected it, but was not sure whether that would be ok. Thanks
for the clarification.
Will create a pull request today.
--
Stefan
>
>> ---
>> drivers/gpu/drm/panel/panel-simple.c | 2 ++
>> include/drm/drm_crtc.h | 9 +++++++++
>> 2 files changed, 11 insertions(+)
>>
>> diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
>> index ceb2048..77ae07f 100644
>> --- a/drivers/gpu/drm/panel/panel-simple.c
>> +++ b/drivers/gpu/drm/panel/panel-simple.c
>> @@ -72,6 +72,7 @@ struct panel_desc {
>> } delay;
>>
>> u32 bus_format;
>> + u32 bus_flags;
>> };
>>
>> struct panel_simple {
>> @@ -144,6 +145,7 @@ static int panel_simple_get_fixed_modes(struct panel_simple *panel)
>> if (panel->desc->bus_format)
>> drm_display_info_set_bus_formats(&connector->display_info,
>> &panel->desc->bus_format, 1);
>> + connector->display_info.bus_flags = panel->desc->bus_flags;
>>
>> return num;
>> }
>> diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
>> index 4acdaf5..d1559cd 100644
>> --- a/include/drm/drm_crtc.h
>> +++ b/include/drm/drm_crtc.h
>> @@ -118,6 +118,14 @@ enum subpixel_order {
>> #define DRM_COLOR_FORMAT_RGB444 (1<<0)
>> #define DRM_COLOR_FORMAT_YCRCB444 (1<<1)
>> #define DRM_COLOR_FORMAT_YCRCB422 (1<<2)
>> +
>> +#define DRM_BUS_FLAG_DE_LOW (1<<0)
>> +#define DRM_BUS_FLAG_DE_HIGH (1<<1)
>> +/* drive data on pos. edge */
>> +#define DRM_BUS_FLAG_PIXDATA_POSEDGE (1<<2)
>> +/* drive data on neg. edge */
>> +#define DRM_BUS_FLAG_PIXDATA_NEGEDGE (1<<3)
>> +
>> /*
>> * Describes a given display (e.g. CRT or flat panel) and its limitations.
>> */
>> @@ -139,6 +147,7 @@ struct drm_display_info {
>>
>> const u32 *bus_formats;
>> unsigned int num_bus_formats;
>> + u32 bus_flags;
>>
>> /* Mask of supported hdmi deep color modes */
>> u8 edid_hdmi_dc_modes;
>> --
>> 2.8.2
>>
Powered by blists - more mailing lists