| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CABicQ-VWrRG+0rEEF0GxUTPixSbkA18Gq4b5hbgph60SoEQ+2Q@mail.gmail.com>
Date: Fri, 6 May 2016 16:19:19 +0800
From: Wei-Ning Huang <wnhuang@...gle.com>
To: Dan Williams <dcbw@...hat.com>
Cc: Linux-Wireless <linux-wireless@...r.kernel.org>,
LKML <linux-kernel@...r.kernel.org>,
Johannes Berg <johannes@...solutions.net>,
Sameer Nanda <snanda@...omium.org>,
Todd Broch <tbroch@...omium.org>, davem@...emloft.net,
netdev@...r.kernel.org
Subject: Re: [PATCH] cfg80211/nl80211: add wifi tx power mode switching support
On Fri, May 6, 2016 at 12:07 AM, Dan Williams <dcbw@...hat.com> wrote:
>
> On Thu, 2016-05-05 at 14:44 +0800, Wei-Ning Huang wrote:
> > Recent new hardware has the ability to switch between tablet mode and
> > clamshell mode. To optimize WiFi performance, we want to be able to
> > use
> > different power table between modes. This patch adds a new netlink
> > message type and cfg80211_ops function to allow userspace to trigger
> > a
> > power mode switch for a given wireless interface.
> >
> > Signed-off-by: Wei-Ning Huang <wnhuang@...omium.org>
> > ---
> > include/net/cfg80211.h | 11 +++++++++++
> > include/uapi/linux/nl80211.h | 21 +++++++++++++++++++++
> > net/wireless/nl80211.c | 16 ++++++++++++++++
> > net/wireless/rdev-ops.h | 22 ++++++++++++++++++++++
> > net/wireless/trace.h | 20 ++++++++++++++++++++
> > 5 files changed, 90 insertions(+)
> >
> > diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
> > index 9e1b24c..aa77fa0 100644
> > --- a/include/net/cfg80211.h
> > +++ b/include/net/cfg80211.h
> > @@ -2370,6 +2370,12 @@ struct cfg80211_qos_map {
> > * @get_tx_power: store the current TX power into the dbm variable;
> > * return 0 if successful
> > *
> > + * @set_tx_power_mode: set the transmit power mode. Some device have
> > the ability
> > + * to transform between different mode such as clamshell and
> > tablet mode.
> > + * set_tx_power_mode allows setting of different TX power
> > mode at runtime.
> > + * @get_tx_power_mode: store the current TX power mode into the mode
> > variable;
> > + * return 0 if successful
> > + *
> > * @set_wds_peer: set the WDS peer for a WDS interface
> > *
> > * @rfkill_poll: polls the hw rfkill line, use cfg80211 reporting
> > @@ -2631,6 +2637,11 @@ struct cfg80211_ops {
> > int (*get_tx_power)(struct wiphy *wiphy, struct
> > wireless_dev *wdev,
> > int *dbm);
> >
> > + int (*set_tx_power_mode)(struct wiphy *wiphy,
> > + enum nl80211_tx_power_mode
> > mode);
> > + int (*get_tx_power_mode)(struct wiphy *wiphy,
> > + enum nl80211_tx_power_mode
> > *mode);
> > +
> > int (*set_wds_peer)(struct wiphy *wiphy, struct
> > net_device *dev,
> > const u8 *addr);
> >
> > diff --git a/include/uapi/linux/nl80211.h
> > b/include/uapi/linux/nl80211.h
> > index 5a30a75..9b1888a 100644
> > --- a/include/uapi/linux/nl80211.h
> > +++ b/include/uapi/linux/nl80211.h
> > @@ -1796,6 +1796,9 @@ enum nl80211_commands {
> > * connecting to a PCP, and in %NL80211_CMD_START_AP to start
> > * a PCP instead of AP. Relevant for DMG networks only.
> > *
> > + * @NL80211_ATTR_WIPHY_TX_POWER_MODE: Transmit power mode. See
> > + * &enum nl80211_tx_power_mode for possible values.
> > + *
> > * @NUM_NL80211_ATTR: total number of nl80211_attrs available
> > * @NL80211_ATTR_MAX: highest attribute number currently defined
> > * @__NL80211_ATTR_AFTER_LAST: internal use
> > @@ -2172,6 +2175,8 @@ enum nl80211_attrs {
> >
> > NL80211_ATTR_PBSS,
> >
> > + NL80211_ATTR_WIPHY_TX_POWER_MODE,
> > +
> > /* add attributes here, update the policy in nl80211.c */
> >
> > __NL80211_ATTR_AFTER_LAST,
> > @@ -3703,6 +3708,22 @@ enum nl80211_tx_power_setting {
> > };
> >
> > /**
> > + * enum nl80211_tx_power_mode - TX power mode setting
> > + * @NL80211_TX_POWER_LOW: general low TX power mode
> > + * @NL80211_TX_POWER_MEDIUM: general medium TX power mode
> > + * @NL80211_TX_POWER_HIGH: general high TX power mode
> > + * @NL80211_TX_POWER_CLAMSHELL: clamshell mode TX power mode
> > + * @NL80211_TX_POWER_TABLET: tablet mode TX power mode
> > + */
> > +enum nl80211_tx_power_mode {
> > + NL80211_TX_POWER_LOW,
> > + NL80211_TX_POWER_MEDIUM,
> > + NL80211_TX_POWER_HIGH,
> > + NL80211_TX_POWER_CLAMSHELL,
> > + NL80211_TX_POWER_TABLET,
>
> "clamshell" and "tablet" probably mean many different things to many
> different people with respect to whether or not they should do anything
> with power saving or wifi. I feel like a more generic interface is
> needed here.
We could probably drop those two CLAMSHELL and TABLET constant or
describing what they mean
in more detail?
>
> Could this be already done by:
> @NL80211_ATTR_WIPHY_TX_POWER_SETTING = NL80211_TX_POWER_LIMITED
> @NL80211_ATTR_WIPHY_TX_POWER_LEVEL = <limit for clamshell/tablet mode>
>
> and then the device would be able to change its TX power as it saw fit
> up to that limit set by your application which figures out whether it's
> in clamshell or tablet mode?
We usually want different power settings in different band/channel.
For example, we can have three different power settings
in 2.4Ghz, channels 36-64 & channels 100+ on 5Ghz. In this case, we
can not simply set a fixed number to the power level.
A power table is required to map channel/band to actual power limit.
For most of the driver, changing power table requires loading
a new set of calibration data from either devicetree or ACPI. Due to
this, a new message type is required to allow the driver to
switch between tables.
Wei-Ning
>
>
> Dan
>
> > +};
> > +
> > +/**
> > * enum nl80211_packet_pattern_attr - packet pattern attribute
> > * @__NL80211_PKTPAT_INVALID: invalid number for nested attribute
> > * @NL80211_PKTPAT_PATTERN: the pattern, values where the mask has
> > diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
> > index 056a730..61b474d 100644
> > --- a/net/wireless/nl80211.c
> > +++ b/net/wireless/nl80211.c
> > @@ -402,6 +402,7 @@ static const struct nla_policy
> > nl80211_policy[NUM_NL80211_ATTR] = {
> > [NL80211_ATTR_SCHED_SCAN_DELAY] = { .type = NLA_U32 },
> > [NL80211_ATTR_REG_INDOOR] = { .type = NLA_FLAG },
> > [NL80211_ATTR_PBSS] = { .type = NLA_FLAG },
> > + [NL80211_ATTR_WIPHY_TX_POWER_MODE] = { .type = NLA_U32 },
> > };
> >
> > /* policy for the key attributes */
> > @@ -2218,6 +2219,21 @@ static int nl80211_set_wiphy(struct sk_buff
> > *skb, struct genl_info *info)
> > return result;
> > }
> >
> > + if (info->attrs[NL80211_ATTR_WIPHY_TX_POWER_MODE]) {
> > + enum nl80211_tx_power_mode mode;
> > + int idx = 0;
> > +
> > + if (!rdev->ops->set_tx_power_mode)
> > + return -EOPNOTSUPP;
> > +
> > + idx = NL80211_ATTR_WIPHY_TX_POWER_MODE;
> > + mode = nla_get_u32(info->attrs[idx]);
> > +
> > + result = rdev_set_tx_power_mode(rdev, mode);
> > + if (result)
> > + return result;
> > + }
> > +
> > if (info->attrs[NL80211_ATTR_WIPHY_ANTENNA_TX] &&
> > info->attrs[NL80211_ATTR_WIPHY_ANTENNA_RX]) {
> > u32 tx_ant, rx_ant;
> > diff --git a/net/wireless/rdev-ops.h b/net/wireless/rdev-ops.h
> > index 8ae0c04..c3a1035 100644
> > --- a/net/wireless/rdev-ops.h
> > +++ b/net/wireless/rdev-ops.h
> > @@ -552,6 +552,28 @@ static inline int rdev_get_tx_power(struct
> > cfg80211_registered_device *rdev,
> > return ret;
> > }
> >
> > +static inline int
> > +rdev_set_tx_power_mode(struct cfg80211_registered_device *rdev,
> > + enum nl80211_tx_power_mode mode)
> > +{
> > + int ret;
> > + trace_rdev_set_tx_power_mode(&rdev->wiphy, mode);
> > + ret = rdev->ops->set_tx_power_mode(&rdev->wiphy, mode);
> > + trace_rdev_return_int(&rdev->wiphy, ret);
> > + return ret;
> > +}
> > +
> > +static inline int
> > +rdev_get_tx_power_mode(struct cfg80211_registered_device *rdev,
> > + enum nl80211_tx_power_mode *mode)
> > +{
> > + int ret;
> > + trace_rdev_get_tx_power_mode(&rdev->wiphy);
> > + ret = rdev->ops->get_tx_power_mode(&rdev->wiphy, mode);
> > + trace_rdev_return_int_int(&rdev->wiphy, ret, *mode);
> > + return ret;
> > +}
> > +
> > static inline int rdev_set_wds_peer(struct
> > cfg80211_registered_device *rdev,
> > struct net_device *dev, const u8
> > *addr)
> > {
> > diff --git a/net/wireless/trace.h b/net/wireless/trace.h
> > index 09b242b..132c8c2 100644
> > --- a/net/wireless/trace.h
> > +++ b/net/wireless/trace.h
> > @@ -1420,6 +1420,26 @@ TRACE_EVENT(rdev_set_tx_power,
> > WIPHY_PR_ARG, WDEV_PR_ARG,__entry->type, __entry-
> > >mbm)
> > );
> >
> > +DEFINE_EVENT(wiphy_only_evt, rdev_get_tx_power_mode,
> > + TP_PROTO(struct wiphy *wiphy),
> > + TP_ARGS(wiphy)
> > +);
> > +
> > +TRACE_EVENT(rdev_set_tx_power_mode,
> > + TP_PROTO(struct wiphy *wiphy, enum nl80211_tx_power_mode
> > mode),
> > + TP_ARGS(wiphy, mode),
> > + TP_STRUCT__entry(
> > + WIPHY_ENTRY
> > + __field(enum nl80211_tx_power_mode, mode)
> > + ),
> > + TP_fast_assign(
> > + WIPHY_ASSIGN;
> > + __entry->mode = mode;
> > + ),
> > + TP_printk(WIPHY_PR_FMT ", mode: %d",
> > + WIPHY_PR_ARG, __entry->mode)
> > +);
> > +
> > TRACE_EVENT(rdev_return_int_int,
> > TP_PROTO(struct wiphy *wiphy, int func_ret, int func_fill),
> > TP_ARGS(wiphy, func_ret, func_fill),
--
Wei-Ning Huang, 黃偉寧 | Software Engineer, Google Inc., Taiwan |
wnhuang@...gle.com | Cell: +886 910-380678
Powered by blists - more mailing lists