linux-kernel - [PATCH v5 04/11] dmaengine: dw: override LLP support if asked in platform data

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1462547840-14091-5-git-send-email-andriy.shevchenko@linux.intel.com>
Date:	Fri,  6 May 2016 18:17:13 +0300
From:	Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
To:	Bryan O'Donoghue <pure.logic@...us-software.ie>,
	Peter Hurley <peter@...leysoftware.com>,
	linux-serial@...r.kernel.org, Vinod Koul <vinod.koul@...el.com>,
	linux-kernel@...r.kernel.org, dmaengine@...r.kernel.org,
	Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
	ismo.puustinen@...el.com,
	Heikki Krogerus <heikki.krogerus@...ux.intel.com>
Cc:	Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
Subject: [PATCH v5 04/11] dmaengine: dw: override LLP support if asked in platform data

There is at least one known device, i.e. UART on Intel Galileo, that works
unreliably in case of use of multi block transfer support in DMA mode.

Override autodetection by user provided data.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
---
 drivers/dma/dw/core.c                | 10 +++++++---
 include/linux/platform_data/dma-dw.h |  2 ++
 2 files changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/dma/dw/core.c b/drivers/dma/dw/core.c
index 59f571c..d2d1d51 100644
--- a/drivers/dma/dw/core.c
+++ b/drivers/dma/dw/core.c
@@ -1573,9 +1573,13 @@ int dw_dma_probe(struct dw_dma_chip *chip)
 			dwc->block_size = pdata->block_size;
 
 			/* Check if channel supports multi block transfer */
-			channel_writel(dwc, LLP, DWC_LLP_LOC(0xffffffff));
-			dwc->nollp = DWC_LLP_LOC(channel_readl(dwc, LLP)) == 0;
-			channel_writel(dwc, LLP, 0);
+			if (pdata->is_nollp) {
+				dwc->nollp = pdata->is_nollp;
+			} else {
+				channel_writel(dwc, LLP, DWC_LLP_LOC(0xffffffff));
+				dwc->nollp = DWC_LLP_LOC(channel_readl(dwc, LLP)) == 0;
+				channel_writel(dwc, LLP, 0);
+			}
 		}
 	}
 
diff --git a/include/linux/platform_data/dma-dw.h b/include/linux/platform_data/dma-dw.h
index 4636c93..5f0e11e 100644
--- a/include/linux/platform_data/dma-dw.h
+++ b/include/linux/platform_data/dma-dw.h
@@ -40,6 +40,7 @@ struct dw_dma_slave {
  * @is_private: The device channels should be marked as private and not for
  *	by the general purpose DMA channel allocator.
  * @is_memcpy: The device channels do support memory-to-memory transfers.
+ * @is_nollp: The device channels does not support multi block transfers.
  * @chan_allocation_order: Allocate channels starting from 0 or 7
  * @chan_priority: Set channel priority increasing from 0 to 7 or 7 to 0.
  * @block_size: Maximum block size supported by the controller
@@ -51,6 +52,7 @@ struct dw_dma_platform_data {
 	unsigned int	nr_channels;
 	bool		is_private;
 	bool		is_memcpy;
+	bool		is_nollp;
 #define CHAN_ALLOCATION_ASCENDING	0	/* zero to seven */
 #define CHAN_ALLOCATION_DESCENDING	1	/* seven to zero */
 	unsigned char	chan_allocation_order;
-- 
2.8.1