| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <2152876.k9gKxoRjRa@new-mexico>
Date: Fri, 06 May 2016 11:11:36 +1000
From: Alistair Popple <alistair@...ple.id.au>
To: Alexey Kardashevskiy <aik@...abs.ru>
Cc: linuxppc-dev@...ts.ozlabs.org,
Alex Williamson <alex.williamson@...hat.com>,
Benjamin Herrenschmidt <benh@...nel.crashing.org>,
Dan Carpenter <dan.carpenter@...cle.com>,
Daniel Axtens <dja@...ens.net>,
David Gibson <david@...son.dropbear.id.au>,
Gavin Shan <gwshan@...ux.vnet.ibm.com>,
Russell Currey <ruscur@...sell.cc>, kvm@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH kernel v4 10/11] powerpc/powernv/npu: Rework TCE Kill handling
On Thu, 5 May 2016 14:23:20 Alexey Kardashevskiy wrote:
> On 05/03/2016 05:37 PM, Alistair Popple wrote:
> > On Fri, 29 Apr 2016 18:55:23 Alexey Kardashevskiy wrote:
> >> The pnv_ioda_pe struct keeps an array of peers. At the moment it is only
> >> used to link GPU and NPU for 2 purposes:
> >>
> >> 1. Access NPU quickly when configuring DMA for GPU - this was addressed
> >> in the previos patch by removing use of it as DMA setup is not what
> >> the kernel would constantly do.
> >
> > Agreed. It was used here because the peer array was added to deal with (2)
> > below ...
> >
> >> 2. Invalidate TCE cache for NPU when it is invalidated for GPU.
> >> GPU and NPU are in different PE. There is already a mechanism to
> >> attach multiple iommu_table_group to the same iommu_table (used for VFIO),
> >> we can reuse it here so does this patch.
> >
> > ... because we weren't aware iommu_table_group could be used to do this
> > instead.
> >
> >> This gets rid of peers[] array and PNV_IODA_PE_PEER flag as they are
> >> not needed anymore.
> >
> > Happy to see it go. I'm not too familiar with iommu groups but based on the
> > code and what you have described to me both here and offline everything looks
> > good to me. One pretty minor style comment below.
> >
> > Reviewed-By: Alistair Popple <alistair@...ple.id.au>
> >
> >> While we are here, add TCE cache invalidation after enabling bypass.
> >>
> >> Signed-off-by: Alexey Kardashevskiy <aik@...abs.ru>
> >> ---
> >> Changes:
> >> v4:
> >> * reworked as "powerpc/powernv/npu: Add set/unset window helpers" has been
> >> added
> >> ---
> >> arch/powerpc/platforms/powernv/npu-dma.c | 69
> > +++++++++----------------------
> >> arch/powerpc/platforms/powernv/pci-ioda.c | 57 ++++---------------------
> >> arch/powerpc/platforms/powernv/pci.h | 6 ---
> >> 3 files changed, 26 insertions(+), 106 deletions(-)
> >>
> >> diff --git a/arch/powerpc/platforms/powernv/npu-dma.c
> > b/arch/powerpc/platforms/powernv/npu-dma.c
> >> index 800d70f..cb2d1da 100644
> >> --- a/arch/powerpc/platforms/powernv/npu-dma.c
> >> +++ b/arch/powerpc/platforms/powernv/npu-dma.c
> >> @@ -136,22 +136,17 @@ static struct pnv_ioda_pe
> > *get_gpu_pci_dev_and_pe(struct pnv_ioda_pe *npe,
> >> struct pnv_ioda_pe *pe;
> >> struct pci_dn *pdn;
> >>
> >> - if (npe->flags & PNV_IODA_PE_PEER) {
> >> - pe = npe->peers[0];
> >> - pdev = pe->pdev;
> >> - } else {
> >> - pdev = pnv_pci_get_gpu_dev(npe->pdev);
> >> - if (!pdev)
> >> - return NULL;
> >> + pdev = pnv_pci_get_gpu_dev(npe->pdev);
> >> + if (!pdev)
> >> + return NULL;
> >>
> >> - pdn = pci_get_pdn(pdev);
> >> - if (WARN_ON(!pdn || pdn->pe_number == IODA_INVALID_PE))
> >> - return NULL;
> >> + pdn = pci_get_pdn(pdev);
> >> + if (WARN_ON(!pdn || pdn->pe_number == IODA_INVALID_PE))
> >> + return NULL;
> >>
> >> - hose = pci_bus_to_host(pdev->bus);
> >> - phb = hose->private_data;
> >> - pe = &phb->ioda.pe_array[pdn->pe_number];
> >> - }
> >> + hose = pci_bus_to_host(pdev->bus);
> >> + phb = hose->private_data;
> >> + pe = &phb->ioda.pe_array[pdn->pe_number];
> >>
> >> if (gpdev)
> >> *gpdev = pdev;
> >> @@ -186,6 +181,10 @@ static long pnv_npu_set_window(struct pnv_ioda_pe *npe,
> >> }
> >> pnv_pci_ioda2_tce_invalidate_entire(phb, false);
> >>
> >> + /* Add the table to the list so its TCE cache will get invalidated */
> >> + pnv_pci_link_table_and_group(phb->hose->node, 0,
> >> + tbl, &npe->table_group);
> >
> > Where tbl is associated with the GPU and is what links the NPU and GPU PEs.
> >
> >> return 0;
> >> }
> >>
> >> @@ -206,45 +205,12 @@ static long pnv_npu_unset_window(struct pnv_ioda_pe
> > *npe)
> >> }
> >> pnv_pci_ioda2_tce_invalidate_entire(phb, false);
> >>
> >> + pnv_pci_unlink_table_and_group(npe->table_group.tables[0],
> >> + &npe->table_group);
> >> +
> >> return 0;
> >> }
> >>
> >> -void pnv_npu_init_dma_pe(struct pnv_ioda_pe *npe)
> >> -{
> >> - struct pnv_ioda_pe *gpe;
> >> - struct pci_dev *gpdev;
> >> - int i, avail = -1;
> >> -
> >> - if (!npe->pdev || !(npe->flags & PNV_IODA_PE_DEV))
> >> - return;
> >> -
> >> - gpe = get_gpu_pci_dev_and_pe(npe, &gpdev);
> >> - if (!gpe)
> >> - return;
> >> -
> >> - for (i = 0; i < PNV_IODA_MAX_PEER_PES; i++) {
> >> - /* Nothing to do if the PE is already connected. */
> >> - if (gpe->peers[i] == npe)
> >> - return;
> >> -
> >> - if (!gpe->peers[i])
> >> - avail = i;
> >> - }
> >> -
> >> - if (WARN_ON(avail < 0))
> >> - return;
> >> -
> >> - gpe->peers[avail] = npe;
> >> - gpe->flags |= PNV_IODA_PE_PEER;
> >> -
> >> - /*
> >> - * We assume that the NPU devices only have a single peer PE
> >> - * (the GPU PCIe device PE).
> >> - */
> >> - npe->peers[0] = gpe;
> >> - npe->flags |= PNV_IODA_PE_PEER;
> >> -}
> >> -
> >> /*
> >> * Enables 32 bit DMA on NPU.
> >> */
> >> @@ -302,6 +268,9 @@ static int pnv_npu_dma_set_bypass(struct pnv_ioda_pe
> > *npe)
> >> npe->pe_number, npe->pe_number,
> >> 0 /* bypass base */, top);
> >>
> >> + if (rc == OPAL_SUCCESS)
> >> + pnv_pci_ioda2_tce_invalidate_entire(phb, false);
> >> +
> >> return rc;
> >> }
> >>
> >> diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c
> > b/arch/powerpc/platforms/powernv/pci-ioda.c
> >> index db7695f..922c74c 100644
> >> --- a/arch/powerpc/platforms/powernv/pci-ioda.c
> >> +++ b/arch/powerpc/platforms/powernv/pci-ioda.c
> >> @@ -1816,23 +1816,12 @@ static inline void
> > pnv_pci_ioda2_tce_invalidate_pe(struct pnv_ioda_pe *pe)
> >> /* 01xb - invalidate TCEs that match the specified PE# */
> >> unsigned long val = TCE_KILL_INVAL_PE | (pe->pe_number & 0xFF);
> >> struct pnv_phb *phb = pe->phb;
> >> - struct pnv_ioda_pe *npe;
> >> - int i;
> >>
> >> if (!phb->ioda.tce_inval_reg)
> >> return;
> >>
> >> mb(); /* Ensure above stores are visible */
> >> __raw_writeq(cpu_to_be64(val), phb->ioda.tce_inval_reg);
> >> -
> >> - if (pe->flags & PNV_IODA_PE_PEER)
> >> - for (i = 0; i < PNV_IODA_MAX_PEER_PES; i++) {
> >> - npe = pe->peers[i];
> >> - if (!npe || npe->phb->type != PNV_PHB_NPU)
> >> - continue;
> >> -
> >> - pnv_pci_ioda2_tce_invalidate_entire(npe->phb, false);
> >> - }
> >> }
> >>
> >> static void pnv_pci_ioda2_do_tce_invalidate(unsigned pe_number, bool rm,
> >> @@ -1867,33 +1856,24 @@ static void pnv_pci_ioda2_tce_invalidate(struct
> > iommu_table *tbl,
> >> struct iommu_table_group_link *tgl;
> >>
> >> list_for_each_entry_rcu(tgl, &tbl->it_group_list, next) {
> >> - struct pnv_ioda_pe *npe;
> >> struct pnv_ioda_pe *pe = container_of(tgl->table_group,
> >> struct pnv_ioda_pe, table_group);
> >> __be64 __iomem *invalidate = rm ?
> >> (__be64 __iomem *)pe->phb->ioda.tce_inval_reg_phys :
> >> pe->phb->ioda.tce_inval_reg;
> >> - int i;
> >>
> >> - pnv_pci_ioda2_do_tce_invalidate(pe->pe_number, rm,
> >> - invalidate, tbl->it_page_shift,
> >> - index, npages);
> >> -
> >> - if (pe->flags & PNV_IODA_PE_PEER)
> >> + if (pe->phb->type == PNV_PHB_NPU) {
> >> /*
> >> * The NVLink hardware does not support TCE kill
> >> * per TCE entry so we have to invalidate
> >> * the entire cache for it.
> >> */
> >> - for (i = 0; i < PNV_IODA_MAX_PEER_PES; i++) {
> >> - npe = pe->peers[i];
> >> - if (!npe || npe->phb->type != PNV_PHB_NPU ||
> >> - !npe->phb->ioda.tce_inval_reg)
> >> - continue;
> >> -
> >> - pnv_pci_ioda2_tce_invalidate_entire(npe->phb,
> >> - rm);
> >> - }
> >> + pnv_pci_ioda2_tce_invalidate_entire(pe->phb, rm);
> >> + continue;
> >> + }
> >
> > Personally I think an if/else instead of the continue would be cleaner here.
>
>
> I see it as a hack which is nice to have in a way that it does not touch
> the correct code (in this case - by enclosing it into "else{}").
>
> Also, that would increase the indentation of the
> pnv_pci_ioda2_do_tce_invalidate() below for no good reason.
As I said it really is just a matter of personal preference. My only reason
for preferring if/else is that it reduces the chance of someone (read me)
adding something common that needs to happen after either invalidate missing
the continue and then having it not work on NPU.
On the other hand it's still obvious enough and if someone's modifying the code
they probably should read the existing code first anyway. It doesn't actually
need to be changed.
- Alistair
> >
> >> + pnv_pci_ioda2_do_tce_invalidate(pe->pe_number, rm,
> >> + invalidate, tbl->it_page_shift,
> >> + index, npages);
> >> }
> >> }
> >>
> >> @@ -3061,26 +3041,6 @@ static void pnv_pci_ioda_create_dbgfs(void)
> >> #endif /* CONFIG_DEBUG_FS */
> >> }
> >>
> >> -static void pnv_npu_ioda_fixup(void)
> >> -{
> >> - bool enable_bypass;
> >> - struct pci_controller *hose, *tmp;
> >> - struct pnv_phb *phb;
> >> - struct pnv_ioda_pe *pe;
> >> -
> >> - list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
> >> - phb = hose->private_data;
> >> - if (phb->type != PNV_PHB_NPU)
> >> - continue;
> >> -
> >> - list_for_each_entry(pe, &phb->ioda.pe_dma_list, dma_link) {
> >> - enable_bypass = dma_get_mask(&pe->pdev->dev) ==
> >> - DMA_BIT_MASK(64);
> >> - pnv_npu_init_dma_pe(pe);
> >> - }
> >> - }
> >> -}
> >> -
> >> static void pnv_pci_ioda_fixup(void)
> >> {
> >> pnv_pci_ioda_setup_PEs();
> >> @@ -3093,9 +3053,6 @@ static void pnv_pci_ioda_fixup(void)
> >> eeh_init();
> >> eeh_addr_cache_build();
> >> #endif
> >> -
> >> - /* Link NPU IODA tables to their PCI devices. */
> >> - pnv_npu_ioda_fixup();
> >> }
> >>
> >> /*
> >> diff --git a/arch/powerpc/platforms/powernv/pci.h
> > b/arch/powerpc/platforms/powernv/pci.h
> >> index 485e5b1..e117bd8 100644
> >> --- a/arch/powerpc/platforms/powernv/pci.h
> >> +++ b/arch/powerpc/platforms/powernv/pci.h
> >> @@ -24,7 +24,6 @@ enum pnv_phb_model {
> >> #define PNV_IODA_PE_MASTER (1 << 3) /* Master PE in compound case
> > */
> >> #define PNV_IODA_PE_SLAVE (1 << 4) /* Slave PE in compound case
> > */
> >> #define PNV_IODA_PE_VF (1 << 5) /* PE for one VF
> > */
> >> -#define PNV_IODA_PE_PEER (1 << 6) /* PE has peers
> > */
> >>
> >> /* Data associated with a PE, including IOMMU tracking etc.. */
> >> struct pnv_phb;
> >> @@ -32,9 +31,6 @@ struct pnv_ioda_pe {
> >> unsigned long flags;
> >> struct pnv_phb *phb;
> >>
> >> -#define PNV_IODA_MAX_PEER_PES 8
> >> - struct pnv_ioda_pe *peers[PNV_IODA_MAX_PEER_PES];
> >> -
> >> /* A PE can be associated with a single device or an
> >> * entire bus (& children). In the former case, pdev
> >> * is populated, in the later case, pbus is.
> >> @@ -246,8 +242,6 @@ extern void pe_level_printk(const struct pnv_ioda_pe
> > *pe, const char *level,
> >> pe_level_printk(pe, KERN_INFO, fmt, ##__VA_ARGS__)
> >>
> >> /* Nvlink functions */
> >> -extern void pnv_npu_init_dma_pe(struct pnv_ioda_pe *npe);
> >> -extern void pnv_npu_setup_dma_pe(struct pnv_ioda_pe *npe);
> >> extern void pnv_npu_try_dma_set_bypass(struct pci_dev *gpdev, bool bypass);
> >> extern void pnv_pci_ioda2_tce_invalidate_entire(struct pnv_phb *phb, bool
> > rm);
> >>
> >>
> >
>
>
>
Powered by blists - more mailing lists