| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1462827506-23570-3-git-send-email-shankerd@codeaurora.org>
Date: Mon, 9 May 2016 15:58:26 -0500
From: Shanker Donthineni <shankerd@...eaurora.org>
To: Marc Zyngier <marc.zyngier@....com>,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Cc: Thomas Gleixner <tglx@...utronix.de>,
Jason Cooper <jason@...edaemon.net>,
Vikram Sethi <vikrams@...eaurora.org>,
Philip Elcan <pelcan@...eaurora.org>,
Shanker Donthineni <shankerd@...eaurora.org>
Subject: [PATCH V3 2/2] irqchip/gicv3-its: Implement two-level(indirect) device table support
Since device IDs are extremely sparse, the single, a.k.a flat table is
not sufficient for the following two reasons.
1) According to ARM-GIC spec, ITS hw can access maximum of 256(pages)*
64K(pageszie) bytes. In the best case, it supports upto DEVid=21
sparse with minimum device table entry size 8bytes.
2) The maximum memory size that is possible without memblock depends on
MAX_ORDER. 4MB on 4K page size kernel with default MAX_ORDER, so it
supports DEVid range 19bits.
The two-level device table feature brings us two advantages, the first
is a very high possibility of supporting upto 32bit sparse, and the
second one is the best utilization of memory allocation.
The feature is enabled automatically during driver probe if a single
ITS page is not adequate for flat table and the hardware is capable
of two-level table walk.
Signed-off-by: Shanker Donthineni <shankerd@...eaurora.org>
---
Changes since v2:
Fixed a porting bug device 'id' validation check in its_alloc_device_table()
Changes since v1:
Most of this patch has been rewritten after refactoring its_alloc_tables().
Always enable device two-level if the memory requirement is more than PAGE_SIZE.
Fixed the coding bug that breaks on the BE machine.
Edited the commit text.
drivers/irqchip/irq-gic-v3-its.c | 97 +++++++++++++++++++++++++++++++++-------
1 file changed, 80 insertions(+), 17 deletions(-)
diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c
index b23e00c..60a1060 100644
--- a/drivers/irqchip/irq-gic-v3-its.c
+++ b/drivers/irqchip/irq-gic-v3-its.c
@@ -938,6 +938,18 @@ retry_baser:
return 0;
}
+/**
+ * Find out whether an implemented baser register supports a single, flat table
+ * or a two-level table by reading bit offset at '62' after writing '1' to it.
+ */
+static u64 its_baser_check_indirect(struct its_baser *baser)
+{
+ u64 val = GITS_BASER_InnerShareable | GITS_BASER_WaWb;
+
+ writeq_relaxed(val | GITS_BASER_INDIRECT, baser->hwreg);
+ return (readq_relaxed(baser->hwreg) & GITS_BASER_INDIRECT);
+}
+
static int its_alloc_tables(const char *node_name, struct its_node *its)
{
u64 typer = readq_relaxed(its->base + GITS_TYPER);
@@ -964,6 +976,7 @@ static int its_alloc_tables(const char *node_name, struct its_node *its)
u64 entry_size = GITS_BASER_ENTRY_SIZE(val);
int order = get_order(psz);
struct its_baser *baser = its->tables + i;
+ u64 indirect = 0;
if (type == GITS_BASER_TYPE_NONE)
continue;
@@ -977,17 +990,27 @@ static int its_alloc_tables(const char *node_name, struct its_node *its)
* Allocate as many entries as required to fit the
* range of device IDs that the ITS can grok... The ID
* space being incredibly sparse, this results in a
- * massive waste of memory.
+ * massive waste of memory if two-level device table
+ * feature is not supported by hardware.
*
* For other tables, only allocate a single page.
*/
if (type == GITS_BASER_TYPE_DEVICE) {
- /*
- * 'order' was initialized earlier to the default page
- * granule of the the ITS. We can't have an allocation
- * smaller than that. If the requested allocation
- * is smaller, round up to the default page granule.
- */
+ if ((entry_size << ids) > psz)
+ indirect = its_baser_check_indirect(baser);
+
+ if (indirect) {
+ /*
+ * The size of the lvl2 table is equal to ITS
+ * page size which is 'psz'. For computing lvl1
+ * table size, subtract ID bits that sparse
+ * lvl2 table from 'ids' which is reported by
+ * ITS hardware times lvl1 table entry size.
+ */
+ ids -= ilog2(psz / entry_size);
+ entry_size = GITS_LVL1_ENTRY_SIZE;
+ }
+
order = max(get_order(entry_size << ids), order);
if (order >= MAX_ORDER) {
order = MAX_ORDER - 1;
@@ -997,7 +1020,7 @@ static int its_alloc_tables(const char *node_name, struct its_node *its)
}
}
- err = its_baser_setup(its, baser, order, 0);
+ err = its_baser_setup(its, baser, order, indirect);
if (err < 0) {
its_free_tables(its);
return err;
@@ -1187,10 +1210,57 @@ static struct its_baser *its_get_baser(struct its_node *its, u32 type)
return NULL;
}
+static bool its_alloc_device_table(struct its_node *its, u32 dev_id)
+{
+ struct its_baser *baser;
+ struct page *page;
+ u32 esz, idx;
+ u64 *table;
+
+ baser = its_get_baser(its, GITS_BASER_TYPE_DEVICE);
+
+ /* Don't allow device id that exceeds ITS hardware limit */
+ if (!baser)
+ return (ilog2(dev_id) < its->device_ids);
+
+ /* Don't allow device id that exceeds single, flat table limit */
+ esz = GITS_BASER_ENTRY_SIZE(baser->val);
+ if (!(baser->val & GITS_BASER_INDIRECT))
+ return (dev_id < (PAGE_ORDER_TO_SIZE(baser->order) / esz));
+
+ /* Compute 1st level table index & check if that exceeds table limit */
+ idx = dev_id >> ilog2(baser->psz / esz);
+ if (idx >= (PAGE_ORDER_TO_SIZE(baser->order) / GITS_LVL1_ENTRY_SIZE))
+ return false;
+
+ table = baser->base;
+
+ /* Allocate memory for 2nd level table */
+ if (!table[idx]) {
+ page = alloc_pages(GFP_KERNEL | __GFP_ZERO, get_order(baser->psz));
+ if (!page)
+ return false;
+
+ /* Flush memory to PoC if hardware doesn't support coherency */
+ if (!(baser->val & GITS_BASER_SHAREABILITY_MASK))
+ __flush_dcache_area(page_address(page), baser->psz);
+
+ table[idx] = cpu_to_le64(page_to_phys(page) | GITS_BASER_VALID);
+
+ /* Flush memory to PoC if hardware doesn't support coherency */
+ if (!(baser->val & GITS_BASER_SHAREABILITY_MASK))
+ __flush_dcache_area(table + idx, GITS_LVL1_ENTRY_SIZE);
+
+ /* Ensure updated table contents are visible to ITS hardware */
+ dsb(sy);
+ }
+
+ return true;
+}
+
static struct its_device *its_create_device(struct its_node *its, u32 dev_id,
int nvecs)
{
- struct its_baser *baser;
struct its_device *dev;
unsigned long *lpi_map;
unsigned long flags;
@@ -1201,14 +1271,7 @@ static struct its_device *its_create_device(struct its_node *its, u32 dev_id,
int nr_ites;
int sz;
- baser = its_get_baser(its, GITS_BASER_TYPE_DEVICE);
-
- /* Don't allow 'dev_id' that exceeds single, flat table limit */
- if (baser) {
- if (dev_id >= (PAGE_ORDER_TO_SIZE(baser->order) /
- GITS_BASER_ENTRY_SIZE(baser->val)))
- return NULL;
- } else if (ilog2(dev_id) >= its->device_ids)
+ if (!its_alloc_device_table(its, dev_id))
return NULL;
dev = kzalloc(sizeof(*dev), GFP_KERNEL);
--
Qualcomm Technologies, Inc. on behalf of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
Powered by blists - more mailing lists