| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-id: <573198BE.6020900@samsung.com>
Date: Tue, 10 May 2016 10:15:58 +0200
From: Krzysztof Kozlowski <k.kozlowski@...sung.com>
To: Anand Moon <linux.amoon@...il.com>
Cc: Kukjin Kim <kgene@...nel.org>,
Lukasz Majewski <l.majewski@...sung.com>,
Javier Martinez Canillas <javier@....samsung.com>,
devicetree <devicetree@...r.kernel.org>,
linux-arm-kernel <linux-arm-kernel@...ts.infradead.org>,
"linux-samsung-soc@...r.kernel.org"
<linux-samsung-soc@...r.kernel.org>,
Linux Kernel <linux-kernel@...r.kernel.org>,
Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>
Subject: Re: [PATCH] ARM: dts: exynos: Only Odroid XU3-family boards use DTSI
with CPU thermal nodes
On 05/10/2016 08:43 AM, Anand Moon wrote:
> Hi Krzysztof ,
>
> On 9 May 2016 at 11:49, Krzysztof Kozlowski <k.kozlowski@...sung.com> wrote:
>> Include the CPU thermal nodes directly in Odroid XU3-family common DTS
>> because it is the only user of it. Keeping it in separate DTSI node does
>> not bring benefits because:
>> 1. It is not re-usable on other non-fan boards (fan is referenced),
>> 2. It won't be re-used on future Odroid XU board because different
>> CPU cluster behavior.
>>
>> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@...sung.com>
>> ---
>> arch/arm/boot/dts/exynos5422-cpu-thermal.dtsi | 103 ---------------------
>> arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi | 94 ++++++++++++++++++-
>> 2 files changed, 92 insertions(+), 105 deletions(-)
>> delete mode 100644 arch/arm/boot/dts/exynos5422-cpu-thermal.dtsi
>>
>> diff --git a/arch/arm/boot/dts/exynos5422-cpu-thermal.dtsi b/arch/arm/boot/dts/exynos5422-cpu-thermal.dtsi
>> deleted file mode 100644
>> index 3e4c4ad96d63..000000000000
>> --- a/arch/arm/boot/dts/exynos5422-cpu-thermal.dtsi
>> +++ /dev/null
>> @@ -1,103 +0,0 @@
>> -/*
>> - * Device tree sources for Exynos5422 thermal zone
>> - *
>> - * Copyright (c) 2015 Lukasz Majewski <l.majewski@...sung.com>
>> - * Anand Moon <linux.amoon@...il.com>
>> - *
>> - * This program is free software; you can redistribute it and/or modify
>> - * it under the terms of the GNU General Public License version 2 as
>> - * published by the Free Software Foundation.
>> - *
>> - */
>> -
>> -#include <dt-bindings/thermal/thermal.h>
>> -
>> -/ {
>> - thermal-zones {
>> - cpu0_thermal: cpu0-thermal {
>> - thermal-sensors = <&tmu_cpu0 0>;
>> - polling-delay-passive = <250>;
>> - polling-delay = <0>;
>> - trips {
>> - cpu_alert0: cpu-alert-0 {
>> - temperature = <50000>; /* millicelsius */
>> - hysteresis = <5000>; /* millicelsius */
>> - type = "active";
>> - };
>> - cpu_alert1: cpu-alert-1 {
>> - temperature = <60000>; /* millicelsius */
>> - hysteresis = <5000>; /* millicelsius */
>> - type = "active";
>> - };
>> - cpu_alert2: cpu-alert-2 {
>> - temperature = <70000>; /* millicelsius */
>> - hysteresis = <5000>; /* millicelsius */
>> - type = "active";
>> - };
>> - cpu_crit0: cpu-crit-0 {
>> - temperature = <120000>; /* millicelsius */
>> - hysteresis = <0>; /* millicelsius */
>> - type = "critical";
>> - };
>> - /*
>> - * Exyunos542x support only 4 trip-points
>> - * so for these polling mode is required.
>> - * Start polling at temperature level of last
>> - * interrupt-driven trip: cpu_alert2
>> - */
>> - cpu_alert3: cpu-alert-3 {
>> - temperature = <70000>; /* millicelsius */
>> - hysteresis = <10000>; /* millicelsius */
>> - type = "passive";
>> - };
>> - cpu_alert4: cpu-alert-4 {
>> - temperature = <85000>; /* millicelsius */
>> - hysteresis = <10000>; /* millicelsius */
>> - type = "passive";
>> - };
>> -
>> - };
>> - cooling-maps {
>> - map0 {
>> - trip = <&cpu_alert0>;
>> - cooling-device = <&fan0 0 1>;
>> - };
>> - map1 {
>> - trip = <&cpu_alert1>;
>> - cooling-device = <&fan0 1 2>;
>> - };
>> - map2 {
>> - trip = <&cpu_alert2>;
>> - cooling-device = <&fan0 2 3>;
>> - };
>> - /*
>> - * When reaching cpu_alert3, reduce CPU
>> - * by 2 steps. On Exynos5422/5800 that would
>> - * be: 1500 MHz and 1100 MHz.
>> - */
>> - map3 {
>> - trip = <&cpu_alert3>;
>> - cooling-device = <&cpu0 0 2>;
>> - };
>> - map4 {
>> - trip = <&cpu_alert3>;
>> - cooling-device = <&cpu4 0 2>;
>> - };
>> -
>> - /*
>> - * When reaching cpu_alert4, reduce CPU
>> - * further, down to 600 MHz (11 steps for big,
>> - * 7 steps for LITTLE).
>> - */
>> - map5 {
>> - trip = <&cpu_alert4>;
>> - cooling-device = <&cpu0 3 7>;
>> - };
>> - map6 {
>> - trip = <&cpu_alert4>;
>> - cooling-device = <&cpu4 3 11>;
>> - };
>> - };
>> - };
>> - };
>> -};
>> diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
>> index 2a4e10bc8801..ff05041835e5 100644
>> --- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
>> +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
>> @@ -1,9 +1,11 @@
>> /*
>> * Hardkernel Odroid XU3 board device tree source
>> *
>> - * Copyright (c) 2014 Collabora Ltd.
>> * Copyright (c) 2013 Samsung Electronics Co., Ltd.
>> * http://www.samsung.com
>> + * Copyright (c) 2014 Collabora Ltd.
>> + * Copyright (c) 2015 Lukasz Majewski <l.majewski@...sung.com>
>> + * Anand Moon <linux.amoon@...il.com>
>> *
>> * This program is free software; you can redistribute it and/or modify
>> * it under the terms of the GNU General Public License version 2 as
>> @@ -16,7 +18,6 @@
>> #include <dt-bindings/sound/samsung-i2s.h>
>> #include "exynos5800.dtsi"
>> #include "exynos5422-cpus.dtsi"
>> -#include "exynos5422-cpu-thermal.dtsi"
>>
>> / {
>> memory {
>> @@ -54,6 +55,95 @@
>> #cooling-cells = <2>;
>> cooling-levels = <0 130 170 230>;
>> };
>> +
>> + thermal-zones {
>> + cpu0_thermal: cpu0-thermal {
>> + thermal-sensors = <&tmu_cpu0 0>;
>> + polling-delay-passive = <250>;
>> + polling-delay = <0>;
>> + trips {
>> + cpu_alert0: cpu-alert-0 {
>> + temperature = <50000>; /* millicelsius */
>> + hysteresis = <5000>; /* millicelsius */
>> + type = "active";
>> + };
>> + cpu_alert1: cpu-alert-1 {
>> + temperature = <60000>; /* millicelsius */
>> + hysteresis = <5000>; /* millicelsius */
>> + type = "active";
>> + };
>> + cpu_alert2: cpu-alert-2 {
>> + temperature = <70000>; /* millicelsius */
>> + hysteresis = <5000>; /* millicelsius */
>> + type = "active";
>> + };
>> + cpu_crit0: cpu-crit-0 {
>> + temperature = <120000>; /* millicelsius */
>> + hysteresis = <0>; /* millicelsius */
>> + type = "critical";
>> + };
>> + /*
>> + * Exynos542x supports only 4 trip-points
>> + * so for these polling mode is required.
>> + * Start polling at temperature level of last
>> + * interrupt-driven trip: cpu_alert2
>> + */
>> + cpu_alert3: cpu-alert-3 {
>> + temperature = <70000>; /* millicelsius */
>> + hysteresis = <10000>; /* millicelsius */
>> + type = "passive";
>> + };
>> + cpu_alert4: cpu-alert-4 {
>> + temperature = <85000>; /* millicelsius */
>> + hysteresis = <10000>; /* millicelsius */
>> + type = "passive";
>> + };
>> +
>> + };
>> + cooling-maps {
>> + map0 {
>> + trip = <&cpu_alert0>;
>> + cooling-device = <&fan0 0 1>;
>> + };
>> + map1 {
>> + trip = <&cpu_alert1>;
>> + cooling-device = <&fan0 1 2>;
>> + };
>> + map2 {
>> + trip = <&cpu_alert2>;
>> + cooling-device = <&fan0 2 3>;
>> + };
>> + /*
>> + * When reaching cpu_alert3, reduce CPU
>> + * by 2 steps. On Exynos5422/5800 that would
>> + * be: 1500 MHz and 1100 MHz.
>> + */
>> + map3 {
>> + trip = <&cpu_alert3>;
>> + cooling-device = <&cpu0 0 2>;
>> + };
>> + map4 {
>> + trip = <&cpu_alert3>;
>> + cooling-device = <&cpu4 0 2>;
>> + };
>> +
>> + /*
>> + * When reaching cpu_alert4, reduce CPU
>> + * further, down to 600 MHz (11 steps for big,
>> + * 7 steps for LITTLE).
>> + */
>> + map5 {
>> + trip = <&cpu_alert4>;
>> + cooling-device = <&cpu0 3 7>;
>> + };
>> + map6 {
>> + trip = <&cpu_alert4>;
>> + cooling-device = <&cpu4 3 11>;
>> + };
>> + };
>> + };
>> + };
>> +
>> };
>>
>> &bus_wcore {
>> --
>> 1.9.1
>>
>
> Could you defer this patch, during my testing with pm-qa from linaro.
>
> git://git.linaro.org/tools/pm-qa.git
>
> When their is running of thermal test case cpu usage reaches around
> 300+ percentage
> and some time's the Odroid XU4 hang down.
> -------------------------------------------------------------------------
> [ 1028.056619] CPU4: shutdown
> [ 1148.510372] IRQ54 no longer affine to CPU5
> [ 1148.511864] CPU5: shutdown
> [ 1268.921073] IRQ55 no longer affine to CPU6
> [ 1268.922564] CPU6: shutdown
> [ 1389.271930] cpu cpu4: Failed to find opp_table: -19
> [ 1389.301668] IRQ56 no longer affine to CPU7
> [ 1389.303132] CPU7: shutdown
> [ 1510.538424] cpu cpu4: opp_list_debug_create_link: Failed to create link
> [ 1510.543762] cpu cpu4: _add_opp_dev: Failed to register opp debugfs (-12)
> [ 1510.550625] cpu cpu7: opp_list_debug_create_link: Failed to create link
> [ 1510.557037] cpu cpu7: _add_opp_dev: Failed to register opp debugfs (-12)
> [ 1510.664649] cpu cpu5: cpufreq_init: failed to get clk: -2
> [ 1510.720567] cpu cpu6: cpufreq_init: failed to get clk: -2
> [ 1510.788280] cpu cpu7: cpufreq_init: failed to get clk: -2
> root@...oidxu4l:/home/odroid/study/linaro/pm-qa# killall heat_cpu
>
> -------------------------------------------------------------------------
> And some time I observed that the board will poweroff on reaching
> temperature 120 degree C.
> when I am compiling the kernel with or above. make -j8
> -------------------------------------------------------------------------
> root@...oidxu4l:~# * Starting NTP server ntpd [ OK ]
> saned disabled; edit /etc/default/saned
> [ 4118.924470] thermal thermal_zone3: critical temperature reached(121
> C),shutting down
> [ 4119.014327] thermal thermal_zone3: critical temperature reached(121
> C),shutting down
>
> Broadcast message from root@...oidxu4l
> (unknown) at 20:41 ...
>
> The system is going down for power off NOW!
>
> Broadcast message from root@...oidxu4l
> (unknown) at 20:41 ...
>
> The system is going down for power off NOW!
> [ 4119.431386] thermal thermal_zone3: critical temperature reached(121
> C),shutting down
> [ 4120.206709] thermal thermal_zone3: critical temperature reached(120
> C),shutting down
>
> Broadcast message from root@...oidxu4l
> (unknown) at 20:41 ...
>
> The system is going down for power off NOW!
> wait-for-state stop/waiting
> [ 4157.574406] reboo
>
> U-Boot 2016.03-00665-g563d8d9-dirty (Apr 04 2016 - 22:27:07 +0930) for
> ODROID-XU3
>
> CPU: Exynos5422 @ 800 MHz
> Model: Odroid XU3 based on EXYNOS5422
> Board: Odroid XU3 based on EXYNOS5422
> Type: xu4
> DRAM: 2 GiB
> MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1
> *** Warning - bad CRC, using default environment
> -------------------------------------------------------------------------
> Once the thermal issue is fixed we can redo this changes.
I am sorry but I do not understand.
1. Are you saying that my patch causes the issue?
2. Are you saying that I should not send some patches because of
conflicting work? (that would be peculiar...)
3. Are you saying that I should not apply this patch to me tree because
of conflicting work?
4. Other?
Best regards.
Krzysztof
Powered by blists - more mailing lists