linux-kernel - Re: [PATCH] mmc: tegra: Disable UHS-I modes for tegra30

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <5731C2CE.2030007@nvidia.com>
Date:	Tue, 10 May 2016 12:15:26 +0100
From:	Jon Hunter <jonathanh@...dia.com>
To:	Lucas Stach <dev@...xeye.de>,
	Adrian Hunter <adrian.hunter@...el.com>,
	"Ulf Hansson" <ulf.hansson@...aro.org>,
	Stephen Warren <swarren@...dotorg.org>,
	Thierry Reding <thierry.reding@...il.com>,
	Alexandre Courbot <gnurou@...il.com>
CC:	<linux-mmc@...r.kernel.org>, <linux-tegra@...r.kernel.org>,
	<linux-kernel@...r.kernel.org>
Subject: Re: [PATCH] mmc: tegra: Disable UHS-I modes for tegra30


On 10/05/16 08:09, Lucas Stach wrote:
> Hi Jon,
> 
> Am Montag, den 09.05.2016, 16:15 +0100 schrieb Jon Hunter:
>> Support for SD cards is not working on the Tegra30 Beaver board and
>> on
>> boot the following error message is seen if an SD card is present:
>>
>>  mmc0: error -110 whilst initialising SD card
>>
> Can you please tell me what kind of SD card you used and at which point
> in the initialization it is hanging? I've tested this change on Beaver
> and haven't seen any failures after I implemented the memcomppad
> calibration.

Yes it is an SDHC 4GB I believe. The board is remote and so I have not
seen the exact card. However, here are some more details from sysfs:

root@(none):/# cat /sys/class/mmc_host/mmc0/mmc0\:aaaa/name
SS04G
root@(none):/# cat /sys/class/mmc_host/mmc0/mmc0\:aaaa/csd
400e00325b5900001d8a7f800a404000
root@(none):/# cat /sys/class/mmc_host/mmc0/mmc0\:aaaa/cid
03534453533034478029b1301800f900
root@(none):/# cat /sys/class/mmc_host/mmc0/mmc0\:aaaa/oemid
0x5344
root@(none):/# cat /sys/class/mmc_host/mmc0/mmc0\:aaaa/manfid
0x000003
 
>> In addition to this, Tegra30 is also randomly hanging during system
>> suspend when entering and is caused by the Tegra SDHCI driver. 
> 
> I'll have a look at this soonish.

Thanks. I think I have mentioned this before, but I run a loop test
for example ...

count=0; while [ $count -lt 100 ]; do rtcwake -d rtc0 -m mem -s 3; echo
Suspend iteration $count; count=`expr $count + 1`; done

Cheers
Jon