| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20160511061001.GA16910@shlinux2.ap.freescale.net>
Date: Wed, 11 May 2016 14:10:02 +0800
From: Peter Chen <hzpeterchen@...il.com>
To: Roger Quadros <rogerq@...com>
Cc: peter.chen@...escale.com, stern@...land.harvard.edu,
balbi@...nel.org, gregkh@...uxfoundation.org,
dan.j.williams@...el.com, jun.li@...escale.com,
mathias.nyman@...ux.intel.com, tony@...mide.com,
Joao.Pinto@...opsys.com, abrestic@...omium.org,
yoshihiro.shimoda.uh@...esas.com, linux-usb@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-omap@...r.kernel.org,
devicetree@...r.kernel.org
Subject: Re: [PATCH v7 05/14] usb: otg-fsm: move host controller operations
into usb_otg->hcd_ops
On Mon, May 02, 2016 at 03:18:48PM +0300, Roger Quadros wrote:
> This is to prevent missing symbol build error if OTG is
> enabled (built-in) and HCD core (CONFIG_USB) is module.
>
> Signed-off-by: Roger Quadros <rogerq@...com>
> Acked-by: Peter Chen <peter.chen@....com>
> ---
> drivers/usb/chipidea/otg_fsm.c | 7 +++++++
> drivers/usb/common/usb-otg-fsm.c | 15 +++++++++++----
> drivers/usb/phy/phy-fsl-usb.c | 7 +++++++
> include/linux/usb/otg.h | 2 ++
> 4 files changed, 27 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/usb/chipidea/otg_fsm.c b/drivers/usb/chipidea/otg_fsm.c
> index 1c0c750..2d8d659 100644
> --- a/drivers/usb/chipidea/otg_fsm.c
> +++ b/drivers/usb/chipidea/otg_fsm.c
> @@ -582,6 +582,12 @@ static struct otg_fsm_ops ci_otg_ops = {
> .start_gadget = ci_otg_start_gadget,
> };
>
> +static struct otg_hcd_ops ci_hcd_ops = {
> + .usb_bus_start_enum = usb_bus_start_enum,
> + .usb_control_msg = usb_control_msg,
> + .usb_hub_find_child = usb_hub_find_child,
> +};
> +
Is it possible have default otg_hcd_ops during OTG register to
avoid define it at every dual-role driver?
Peter
> int ci_otg_fsm_work(struct ci_hdrc *ci)
> {
> /*
> @@ -804,6 +810,7 @@ int ci_hdrc_otg_fsm_init(struct ci_hdrc *ci)
> ci->otg.fsm.id = hw_read_otgsc(ci, OTGSC_ID) ? 1 : 0;
> ci->otg.state = OTG_STATE_UNDEFINED;
> ci->otg.fsm.ops = &ci_otg_ops;
> + ci->otg.hcd_ops = &ci_hcd_ops;
> ci->gadget.hnp_polling_support = 1;
> ci->otg.fsm.host_req_flag = devm_kzalloc(ci->dev, 1, GFP_KERNEL);
> if (!ci->otg.fsm.host_req_flag)
> diff --git a/drivers/usb/common/usb-otg-fsm.c b/drivers/usb/common/usb-otg-fsm.c
> index 4bfc6a5..2986b66 100644
> --- a/drivers/usb/common/usb-otg-fsm.c
> +++ b/drivers/usb/common/usb-otg-fsm.c
> @@ -141,11 +141,16 @@ static void otg_hnp_polling_work(struct work_struct *work)
> enum usb_otg_state state = otg->state;
> u8 flag;
> int retval;
> + struct otg_hcd_ops *hcd_ops = otg->hcd_ops;
>
> if (state != OTG_STATE_A_HOST && state != OTG_STATE_B_HOST)
> return;
>
> - udev = usb_hub_find_child(otg->host->root_hub, 1);
> + if (!hcd_ops || !hcd_ops->usb_control_msg ||
> + !hcd_ops->usb_hub_find_child)
> + return;
> +
> + udev = hcd_ops->usb_hub_find_child(otg->host->root_hub, 1);
> if (!udev) {
> dev_err(otg->host->controller,
> "no usb dev connected, can't start HNP polling\n");
> @@ -154,7 +159,7 @@ static void otg_hnp_polling_work(struct work_struct *work)
>
> *fsm->host_req_flag = 0;
> /* Get host request flag from connected USB device */
> - retval = usb_control_msg(udev,
> + retval = hcd_ops->usb_control_msg(udev,
> usb_rcvctrlpipe(udev, 0),
> USB_REQ_GET_STATUS,
> USB_DIR_IN | USB_RECIP_DEVICE,
> @@ -183,7 +188,7 @@ static void otg_hnp_polling_work(struct work_struct *work)
> if (state == OTG_STATE_A_HOST) {
> /* Set b_hnp_enable */
> if (!otg->host->b_hnp_enable) {
> - retval = usb_control_msg(udev,
> + retval = hcd_ops->usb_control_msg(udev,
> usb_sndctrlpipe(udev, 0),
> USB_REQ_SET_FEATURE, 0,
> USB_DEVICE_B_HNP_ENABLE,
> @@ -262,7 +267,9 @@ static int otg_set_state(struct otg_fsm *fsm, enum usb_otg_state new_state)
> otg_loc_conn(otg, 0);
> otg_loc_sof(otg, 1);
> otg_set_protocol(fsm, PROTO_HOST);
> - usb_bus_start_enum(otg->host, otg->host->otg_port);
> + if (otg->hcd_ops && otg->hcd_ops->usb_bus_start_enum)
> + otg->hcd_ops->usb_bus_start_enum(otg->host,
> + otg->host->otg_port);
> otg_start_hnp_polling(fsm);
> break;
> case OTG_STATE_A_IDLE:
> diff --git a/drivers/usb/phy/phy-fsl-usb.c b/drivers/usb/phy/phy-fsl-usb.c
> index 587a187..9dbd9f0 100644
> --- a/drivers/usb/phy/phy-fsl-usb.c
> +++ b/drivers/usb/phy/phy-fsl-usb.c
> @@ -792,6 +792,12 @@ static struct otg_fsm_ops fsl_otg_ops = {
> .start_gadget = fsl_otg_start_gadget,
> };
>
> +static struct otg_hcd_ops fsl_hcd_ops = {
> + .usb_bus_start_enum = usb_bus_start_enum,
> + .usb_control_msg = usb_control_msg,
> + .usb_hub_find_child = usb_hub_find_child,
> +};
> +
> /* Initialize the global variable fsl_otg_dev and request IRQ for OTG */
> static int fsl_otg_conf(struct platform_device *pdev)
> {
> @@ -820,6 +826,7 @@ static int fsl_otg_conf(struct platform_device *pdev)
>
> /* Set OTG state machine operations */
> fsl_otg_tc->otg.fsm.ops = &fsl_otg_ops;
> + fsl_otg_tc->otg.hcd_ops = &fsl_hcd_ops;
>
> /* initialize the otg structure */
> fsl_otg_tc->phy.label = DRIVER_DESC;
> diff --git a/include/linux/usb/otg.h b/include/linux/usb/otg.h
> index e8a14dc..85b8fb5 100644
> --- a/include/linux/usb/otg.h
> +++ b/include/linux/usb/otg.h
> @@ -12,6 +12,7 @@
> #include <linux/phy/phy.h>
> #include <linux/usb/phy.h>
> #include <linux/usb/otg-fsm.h>
> +#include <linux/usb/hcd.h>
>
> struct usb_otg {
> u8 default_a;
> @@ -24,6 +25,7 @@ struct usb_otg {
>
> enum usb_otg_state state;
> struct otg_fsm fsm;
> + struct otg_hcd_ops *hcd_ops;
>
> /* bind/unbind the host controller */
> int (*set_host)(struct usb_otg *otg, struct usb_bus *host);
> --
> 2.7.4
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-usb" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Best Regards,
Peter Chen
Powered by blists - more mailing lists