linux-kernel - [PATCH 1/2] arm64: dts: NS2: Add all of the UARTs

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <1463007369-13071-1-git-send-email-jonmason@broadcom.com>
Date:	Wed, 11 May 2016 18:56:08 -0400
From:	Jon Mason <jon.mason@...adcom.com>
To:	Florian Fainelli <f.fainelli@...il.com>,
	Ray Jui <rjui@...adcom.com>,
	Scott Branden <sbranden@...adcom.com>,
	Rob Herring <robh+dt@...nel.org>,
	Pawel Moll <pawel.moll@....com>,
	Mark Rutland <mark.rutland@....com>,
	Ian Campbell <ijc+devicetree@...lion.org.uk>,
	Kumar Gala <galak@...eaurora.org>,
	Catalin Marinas <catalin.marinas@....com>,
	Will Deacon <will.deacon@....com>
Cc:	bcm-kernel-feedback-list@...adcom.com, devicetree@...r.kernel.org,
	linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: [PATCH 1/2] arm64: dts: NS2: Add all of the UARTs

Add all of the UARTs present on NS2 and enable them in the SVK device
tree file.  Also, do some magic to make sure that uart3 is discovered as
ttyS0 (as that is the console UART).

Signed-off-by: Jon Mason <jonmason@...adcom.com>
---
 arch/arm64/boot/dts/broadcom/ns2-svk.dts | 16 ++++++++++++++++
 arch/arm64/boot/dts/broadcom/ns2.dtsi    | 30 ++++++++++++++++++++++++++++++
 2 files changed, 46 insertions(+)

diff --git a/arch/arm64/boot/dts/broadcom/ns2-svk.dts b/arch/arm64/boot/dts/broadcom/ns2-svk.dts
index 7cd3640..b062a44 100644
--- a/arch/arm64/boot/dts/broadcom/ns2-svk.dts
+++ b/arch/arm64/boot/dts/broadcom/ns2-svk.dts
@@ -40,10 +40,14 @@
 
 	aliases {
 		serial0 = &uart3;
+		serial1 = &uart0;
+		serial2 = &uart1;
+		serial3 = &uart2;
 	};
 
 	chosen {
 		stdout-path = "serial0:115200n8";
+		bootargs = "earlycon=uart8250,mmio32,0x66130000";
 	};
 
 	memory {
@@ -68,6 +72,18 @@
 	status = "ok";
 };
 
+&uart0 {
+	status = "ok";
+};
+
+&uart1 {
+	status = "ok";
+};
+
+&uart2 {
+	status = "ok";
+};
+
 &uart3 {
 	status = "ok";
 };
diff --git a/arch/arm64/boot/dts/broadcom/ns2.dtsi b/arch/arm64/boot/dts/broadcom/ns2.dtsi
index 788ed8f..c77a9e8 100644
--- a/arch/arm64/boot/dts/broadcom/ns2.dtsi
+++ b/arch/arm64/boot/dts/broadcom/ns2.dtsi
@@ -357,6 +357,36 @@
 			status = "disabled";
 		};
 
+		uart0: serial@...00000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x66100000 0x100>;
+			interrupts = <GIC_SPI 390 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&iprocslow>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		uart1: serial@...10000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x66110000 0x100>;
+			interrupts = <GIC_SPI 391 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&iprocslow>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		uart2: serial@...20000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x66120000 0x100>;
+			interrupts = <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&iprocslow>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
 		uart3: serial@...30000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x66130000 0x100>;
-- 
1.9.1