linux-kernel - Re: [PATCH v8 7/8] i2c: rk3x: add i2c support for rk3399 soc

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <5733D7AA.1060500@rock-chips.com>
Date:	Thu, 12 May 2016 09:08:58 +0800
From:	"David.Wu" <david.wu@...k-chips.com>
To:	Doug Anderson <dianders@...omium.org>
Cc:	Heiko Stübner <heiko@...ech.de>,
	Wolfram Sang <wsa@...-dreams.de>,
	Rob Herring <robh+dt@...nel.org>,
	Andy Shevchenko <andy.shevchenko@...il.com>,
	Pawel Moll <pawel.moll@....com>,
	Mark Rutland <mark.rutland@....com>,
	Ian Campbell <ijc+devicetree@...lion.org.uk>,
	Kumar Gala <galak@...eaurora.org>,
	Brian Norris <briannorris@...gle.com>,
	David Riley <davidriley@...gle.com>,
	Tao Huang <huangtao@...k-chips.com>,
	Lin Huang <hl@...k-chips.com>, Jianqun Xu <xjq@...k-chips.com>,
	Chris <zyw@...k-chips.com>, Eddie Cai <cf@...k-chips.com>,
	"linux-arm-kernel@...ts.infradead.org" 
	<linux-arm-kernel@...ts.infradead.org>,
	"open list:ARM/Rockchip SoC..." <linux-rockchip@...ts.infradead.org>,
	"linux-i2c@...r.kernel.org" <linux-i2c@...r.kernel.org>,
	"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
	"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v8 7/8] i2c: rk3x: add i2c support for rk3399 soc

Hi Doug,

在 2016/5/12 1:37, Doug Anderson 写道:
> Hi,
>
> On Tue, May 10, 2016 at 12:31 PM, David Wu <david.wu@...k-chips.com> wrote:
>>   static void rk3x_i2c_adapt_div(struct rk3x_i2c *i2c, unsigned long clk_rate)
>>   {
>>          struct i2c_timings *t = &i2c->t;
>>          struct rk3x_i2c_calced_timings calc;
>>          u64 t_low_ns, t_high_ns;
>> +       u32 val;
>>          int ret;
>>
>> -       ret = rk3x_i2c_calc_divs(clk_rate, t, &calc);
>> +       ret = i2c->soc_data->calc_timings(clk_rate, t, &calc);
>>          WARN_ONCE(ret != 0, "Could not reach SCL freq %u", t->bus_freq_hz);
>>
>> -       clk_enable(i2c->clk);
>> +       clk_enable(i2c->pclk);
>> +
>>          i2c_writel(i2c, (calc.div_high << 16) | (calc.div_low & 0xffff),
>>                     REG_CLKDIV);
>> -       clk_disable(i2c->clk);
>> +
>> +       val = i2c_readl(i2c, REG_CON);
>> +       val &= ~REG_CON_TUNING_MASK;
>> +       val |= calc.tuning;
>> +       i2c_writel(i2c, val, REG_CON);
>
> Another subtle bug here.  You need to be holding the spinlock here
> since you're doing a read-modify-write of a register that is also
> touched by the interrupt handler.  We never needed it before because
> the previous register update wasn't touched by anyone else and it was
> a single atomic write.
>
> Also: technically if we are midway through a transfer when all this
> happens then there will be a very short period of time when the two
> timing-related registers won't match with each other.  I have no idea
> how much that would matter, but in the very least it seems wise to
> minimize the time where they mismatch.  So I'd probably write:
>
>         spin_lock_irqsave(&i2c->lock, flags);
>         val = i2c_readl(i2c, REG_CON);
>         val &= ~REG_CON_TUNING_MASK;
>         val |= calc.tuning;
>         i2c_writel(i2c, val, REG_CON);
>         i2c_writel(i2c, (calc.div_high << 16) | (calc.div_low & 0xffff),
>                    REG_CLKDIV);
>         spin_unlock_irqrestore(&i2c->lock, flags);
>
> ...if we really end up with on a system with a dynamically changing
> clock that uses the new-style timing and we see real problems, we can
> always try to come up with a way to avoid any problems.  Sound OK?
>
>

Good, add spin_lock is very necessary for atomic write here, thanks for 
your advice.

> Otherwise, I think things look good to me.  Caesar's comments would
> also be good to fix.
>
>
> -Doug
>
>
>