linux-kernel - Re: [PATCH 6/6] pinctrl: mt8173: set GPIO16 to usb iddig mode

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Wed, 11 May 2016 19:55:01 -0700
From:	Hongzhou Yang <hongzhou.yang@...iatek.com>
To:	chunfeng yun <chunfeng.yun@...iatek.com>
CC:	Linus Walleij <linus.walleij@...aro.org>,
	Maoguang Meng <maoguang.meng@...iatek.com>,
	Yingjoe Chen <yingjoe.chen@...iatek.com>,
	"Greg Kroah-Hartman" <gregkh@...uxfoundation.org>,
	Felipe Balbi <felipe.balbi@...ux.intel.com>,
	Mathias Nyman <mathias.nyman@...el.com>,
	"Alan Stern" <stern@...land.harvard.edu>,
	Rob Herring <robh+dt@...nel.org>,
	"Mark Rutland" <mark.rutland@....com>,
	Ian Campbell <ijc+devicetree@...lion.org.uk>,
	Matthias Brugger <matthias.bgg@...il.com>,
	Sergei Shtylyov <sergei.shtylyov@...entembedded.com>,
	Pawel Moll <pawel.moll@....com>,
	"Kumar Gala" <galak@...eaurora.org>,
	Sascha Hauer <s.hauer@...gutronix.de>,
	"Biao Huang" <biao.huang@...iatek.com>,
	"linux-usb@...r.kernel.org" <linux-usb@...r.kernel.org>,
	"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
	"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
	"linux-arm-kernel@...ts.infradead.org" 
	<linux-arm-kernel@...ts.infradead.org>,
	"moderated list:ARM/Mediatek SoC support" 
	<linux-mediatek@...ts.infradead.org>,
	"linux-gpio@...r.kernel.org" <linux-gpio@...r.kernel.org>,
	<aaron.yhz@...il.com>
Subject: Re: [PATCH 6/6] pinctrl: mt8173: set GPIO16 to usb iddig mode

On Wed, 2016-05-11 at 19:09 -0700, Hongzhou Yang wrote:
> On Thu, 2016-05-12 at 09:41 +0800, chunfeng yun wrote:
> > Hi,
> > 
> > On Wed, 2016-05-11 at 11:32 -0700, Hongzhou Yang wrote:
> > > On Wed, 2016-05-11 at 13:56 +0200, Linus Walleij wrote:
> > > > On Tue, May 10, 2016 at 10:23 AM, Chunfeng Yun
> > > > <chunfeng.yun@...iatek.com> wrote:
> > > > 
> > > > > the default mode of GPIO16 pin is gpio, when set EINT16 to
> > > > > IRQ_TYPE_LEVEL_HIGH, no interrupt is triggered, it can be
> > > > > fixed when set its default mode as usb iddig.
> > > > >
> > > > > Signed-off-by: Chunfeng Yun <chunfeng.yun@...iatek.com>
> > > > 
> > > 
> > > Chunfeng, GPIO16 can be used as EINT16 mode, but the pinmux should be 0.
> > > If you want to set its default mode to iddig, you should set it in dts.
> > > 
> > I set it in DTS, but it didn't work, because when usb driver requested
> > IRQ, pinmux was switched back to default mode set by
> > MTK_EINT_FUNCTION().
> > 
> 
> After confirmed, there are something wrong with data sheet and pinmux
> table, and GPIO16 can only receive interrupt by mode 1. So
> 
> Acked-by: Hongzhou Yang <hongzhou.yang@...iatek.com>
> 

Linus,

We find there are some other pins still have the same problem, so please
hold on it. Sorry for so much noise.

Thanks,
Hongzhou