lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <2856271.3aAGK3LarU@debian64>
Date:	Thu, 12 May 2016 15:30:15 +0200
From:	Christian Lamparter <chunkeey@...glemail.com>
To:	Arnd Bergmann <arnd@...db.de>
Cc:	Benjamin Herrenschmidt <benh@...nel.crashing.org>,
	Felipe Balbi <felipe.balbi@...ux.intel.com>,
	linux-mips@...ux-mips.org, johnyoun@...opsys.com,
	gregkh@...uxfoundation.org, linux-usb@...r.kernel.org,
	linux-kernel@...r.kernel.org, a.seppala@...il.com,
	linuxppc-dev@...ts.ozlabs.org
Subject: Re: usb: dwc2: regression on MyBook Live Duo / Canyonlands since 4.3.0-rc4

On Thursday, May 12, 2016 01:55:44 PM Arnd Bergmann wrote:
> On Thursday 12 May 2016 11:58:18 Christian Lamparter wrote:
> > > > > Detecting the endianess of the
> > > > > device is probably the best future-proof solution, but it's also
> > > > > considerably more work to do in the driver, and comes with a
> > > > > tiny runtime overhead.
> > > > 
> > > > The runtime overhead is probably non-measurable compared with the cost
> > > > of the actual MMIOs.
> > > 
> > > Right. The code size increase is probably measurable (but still small),
> > > the runtime overhead is not.
> > 
> > Ok, so no rebuts or complains have been posted.
> > 
> > I've tested the patch you made in: https://lkml.org/lkml/2016/5/9/354
> > and it works: 
> > 
> > Tested-by: Christian Lamparter <chunkeey@...glemail.com>
> > 
> > So, how do we go from here? There is are two small issues with the
> > original patch (#ifdef DWC2_LOG_WRITES got converted to lower case:
> > #ifdef dwc2_log_writes) and I guess a proper subject would be nice.  
> > 
> > Arnd, can you please respin and post it (cc'd stable as well)?
> > So this is can be picked up? Or what's your plan?
> 
> (I just realized my reply was stuck in my outbox, so the patch
> went out first)
> 
> If I recall correctly, the rough consensus was to go with your longer
> patch in the future (fixed up for the comments that BenH and
> I sent), and I'd suggest basing it on top of a fixed version of
> my patch.
Well, but it comes with the "overhead"! So this was just as I said:
"Let's look at it and see if it's any good"... And I think it isn't
since the usb/host/ehci people also opted for #ifdef CONFIG_BIG_ENDIAN
archs etc...
 
> Felipe just had another idea, to change the endianess of the dwc2
> block by setting a registers (if that exists). That would indeed
> be preferable, then we can just revert the broken change that
> went into 4.4 and backport that fix instead.
Just a quick reply. I have the docs for the thing. There's something
like that in GAHBCFG at Bit 24... BUT it only switches the endiannes
for the DMA descriptors (which is not always used, there are devices
with PIO only)! It doesn't deal with the MMIO access at all. 

The pin that would select which endian the device uses is probably
connected to a DCR or GPIO but I don't know which or where so this
is more or less useless. (Or the selectable endianness was dropped
during synth).

Regards,
Christian

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ