| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAJKOXPdgyDVbZu7LqewM+V9tE_EwR8S+MjRUeFvDjfzJxtXiiw@mail.gmail.com>
Date: Fri, 13 May 2016 18:05:37 +0200
From: Krzysztof Kozlowski <k.kozlowski@...sung.com>
To: rtc-linux@...glegroups.com
Cc: a.zummo@...ertech.it, linux-kernel@...r.kernel.org,
alexandre.belloni@...e-electrons.com, marcus.folkesson@...il.com,
venkat-prashanth <venkat.prashanth2498@...il.com>
Subject: Re: [rtc-linux] [PATCH] rtc: add support for Maxim rtc max6916 v3.0
On Fri, May 13, 2016 at 8:14 AM, <venkat.prashanth2498@...il.com> wrote:
> From: venkat-prashanth <venkat.prashanth2498@...il.com>
>
> This is a patch to add support
> for Maxim rtc max6916
Please fix line wrapping (around 72 characters).
Also please follow patch submission rules. Look at other patches with
versions - how "v4" is added (not to title) and prefix for driver,
after 'rtc'.
> Signed-off-by: Venkat Prashanth B U <venkat.prashanth2498@...il.com>
>From name does not match Signed-off-by.
> ---
>
> #Change Log: from v2.0 to v3.0
>
> - fixed the out-of-tree Makefile and suitably added
> the modifications in the Makefile
>
> - fixed the bad indented Kconfig file
>
> -used a define instead of 0x1B as follows
> #define MAX6916_REG_MAP_ADDRESS 0x1B
>
> -moved and placed the test at the begining of the function
> after the range is properly enforced
> if (dt->tm_year < 100 || dt->tm_year > 199) {
> dev_err(&spi->dev,"Year must be between 2000 and 2099.
> It's %d.\n", dt->tm_year + 1900);
> return -EINVAL;
> }
>
> - A magic number is a direct usage of a number
> in the code,instead has been refactored in the
> current version v3.0 which use defines as follows:-
> -max6916_read_reg(&spi->dev,
> int MAX6916_CONTROL_REG = 0x08, &data);
> -max6916_write_reg(&spi->dev,
> int MAX6916_CONTROL_REG= 0x08, data);
> -max6916_write_reg(&spi->dev,
> int MAX6916_STATUS_REG = 0x0C, data);
> -max6916_read_reg(&spi->dev,
> int MAX6916_CONTROL_REG = 0x08, &data);
> -max6916_read_reg(&spi->dev,
> int MAX6916_STATUS_REG = 0X0C, &data);
> -Unnecessary test function if(dt->tm_year >= 100)
> dt->tm_year -= 100;
> is deleted after the range is properly enforced.
> -seperated logical code sections with an empty line
> and used indentation after if-statements.
Indentation and line wrapping created unreadable piece of changelog.
> ---
> ---
> Kconfig | 9 ++++
> Makefile | 1 +
> rtc-max6916.c | 162 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
This looks wrong.
> 3 files changed, 172 insertions(+)
>
> diff --git a/driver/rtc/Kconfig b/driver/rtc/Kconfig
> index fcf87da..5321e8f 100644
> --- a/driver/rtc/Kconfig
> +++ b/driver/rtc/Kconfig
> @@ -699,6 +699,15 @@
>
> This driver can also be built as a module. If so, the module
> will be called rtc-max6902.
> + config RTC_DRV_MAX6916
> + tristate "Maxim MAX6916"
> + help
> + If you say yes here you will get support for the
> + Maxim MAX6916 SPI RTC chip.
> +
> + This driver can also be built as a module. If so, the module
> + will be called rtc-max6916.
> +
>
> config RTC_DRV_R9701
> tristate "Epson RTC-9701JE"
> diff --git a/driver/rtc/Makefile b/driver/rtc/Makefile
> index 9421959..0b3fded 100644
> --- a/driver/rtc/Makefile
> +++ b/driver/rtc/Makefile
> @@ -85,6 +85,7 @@
> obj-$(CONFIG_RTC_DRV_M48T86) += rtc-m48t86.o
> obj-$(CONFIG_RTC_DRV_MAX6900) += rtc-max6900.o
> obj-$(CONFIG_RTC_DRV_MAX6902) += rtc-max6902.o
> +obj-$(CONFIG_RTC_DRV_MAX6916) += rtc-max6916.o
> obj-$(CONFIG_RTC_DRV_MAX77686) += rtc-max77686.o
> obj-$(CONFIG_RTC_DRV_MAX77802) += rtc-max77802.o
> obj-$(CONFIG_RTC_DRV_MAX8907) += rtc-max8907.o
> diff --git a/driver/rtc/rtc-max6916.c b/driver/rtc/rtc-max6916.c
> index e69de29..ced341a 100644
> --- a/driver/rtc/rtc-max6916.c
> +++ b/driver/rtc/rtc-max6916.c
> @@ -0,0 +1,162 @@
> +#include <linux/init.h>
> +#include <linux/module.h>
> +#include <linux/device.h>
> +#include <linux/platform_device.h>
> +#include <linux/rtc.h>
> +#include <linux/spi/spi.h>
> +#include <linux/bcd.h>
> +
> +/* Registers in max6916 rtc */
> +
> +#define MAX6916_SECONDS_REG 0x01
> +#define MAX6916_MINUTES_REG 0x02
> +#define MAX6916_HOURS_REG 0x03
> +#define MAX6916_DATE_REG 0x04
> +#define MAX6916_MONTH_REG 0x05
> +#define MAX6916_DAY_REG 0x06
> +#define MAX6916_YEAR_REG 0x07
> +#define MAX6916_CONTROL_REG 0x08
> +#define MAX6916_STATUS_REG 0x0C
> +#define MAX6916_CLOCK_BURST 0x3F
> +#define MAX6916_REG_MAP_ADDRESS 0x1B
Align the value with tabs. Make it readable.
> +
> +static int max6916_read_reg(struct device *dev, unsigned char address, unsigned char *data)
> +
> +{
> + struct spi_device *spi = to_spi_device(dev);
All of these indentations look wrong.
Have you run checkpatch? I doubt it. Run also sparse and smatch. Fix
all the warnings.
> +
> + *data = address | 0x80;
> +
> + return spi_write_then_read(spi, data, 1, data, 1);
> +}
> +
> +static int max6916_write_reg(struct device *dev, unsigned char address, unsigned char data)
> +
> +{
> + struct spi_device *spi = to_spi_device(dev);
> + unsigned char buf[2];
> +
> + buf[0] = address&0x7F;
> + buf[1] = data;
> +
> + return spi_write_then_read(spi, buf, 2, NULL, 0);
> +}
> +
> +static int max6916_read_time(struct device *dev, struct rtc_time *dt)
> +{
> + struct spi_device *spi = to_spi_device(dev);
> + int err;
> + unsigned char buf[8];
> +
> + buf[0] = MAX6916_CLOCK_BURST | 0x80;
> +
> +err = spi_write_then_read(spi, buf, 1, buf, 8);
> + if (err)
> + return err;
> +
> + dt->tm_sec = bcd2bin(buf[0]);
> + dt->tm_min = bcd2bin(buf[1]);
> + dt->tm_hour = bcd2bin(buf[2] & 0x3F);
> + dt->tm_mday = bcd2bin(buf[3]);
> + dt->tm_mon = bcd2bin(buf[4]) - 1;
> + dt->tm_wday = bcd2bin(buf[5]) - 1;
> + dt->tm_year = bcd2bin(buf[6]) + 100;
> +
> + return rtc_valid_tm(dt);
> +}
> +
> +static int max6916_set_time(struct device *dev, struct rtc_time *dt)
> +{
> + struct spi_device *spi = to_spi_device(dev);
> + unsigned char buf[9];
> +
> + if (dt->tm_year < 100 || dt->tm_year > 199) {
> + dev_err(&spi->dev, "Year must be between 2000 and 2099.It's %d.\n", dt->tm_year+1900);
> + return -EINVAL;
> +}
> +
> + buf[0] = MAX6916_CLOCK_BURST & 0x7F;
> + buf[1] = bin2bcd(dt->tm_sec);
> + buf[2] = bin2bcd(dt->tm_min);
> + buf[3] = (bin2bcd(dt->tm_hour) & 0X3F);
> + buf[4] = bin2bcd(dt->tm_mday);
> + buf[5] = bin2bcd(dt->tm_mon + 1);
> + buf[6] = bin2bcd(dt->tm_wday + 1);
> + buf[7] = bin2bcd(dt->tm_year % 100);
> + buf[8] = bin2bcd(0x00);
> +
> + /* write the rtc settings */
> + return spi_write_then_read(spi, buf, 9, NULL, 0);
> +}
> +
> +static const struct rtc_class_ops max6916_rtc_ops = {
> + .read_time = max6916_read_time,
> + .set_time = max6916_set_time,
> +};
> +
> +static int max6916_probe(struct spi_device *spi)
> +{
> + struct rtc_device *rtc;
> + unsigned char data;
> + int res;
> +
> + /* spi setup with max6916 in mode 3 and bits per word as 8 */
> + spi->mode = SPI_MODE_3;
> + spi->bits_per_word = 8;
> + spi_setup(spi);
> +
> + /* RTC Settings */
> + res = max6916_read_reg(&spi->dev, MAX6916_SECONDS_REG, &data);
> +
> + if (res)
> + return res;
> +
> + /* Disable the write protect of rtc */
> + max6916_read_reg(&spi->dev, int MAX6916_CONTROL_REG = 0x08, &data);
> + data = data & ~(1<<7);
> + max6916_write_reg(&spi->dev, int MAX6916_CONTROL_REG = 0x08, data);
> +
> + /*Enable the oscillator,disable the oscillator stop flag, and glitch filter to reduce current consumption*/
> + max6916_read_reg(&spi->dev, int MAX6916_STATUS_REG = 0X0C, &data);
> + data = data & MAX6916_REG_MAP_ADDRESS;
> + max6916_write_reg(&spi->dev, int MAX6916_STATUS_REG = 0x0C, data);
Return value ignored. Does not look correct.
> +
> + /* display the settings */
> + max6916_read_reg(&spi->dev, int MAX6916_CONTROL_REG = 0x08, &data);
> + dev_info(&spi->dev, "MAX6916 RTC CTRL Reg = 0x%02x\n", data);
> +
> + max6916_read_reg(&spi->dev, int MAX6916_STATUS_REG = 0X0C, &data);
> + dev_info(&spi->dev, "MAX6916 RTC Status Reg = 0x%02x\n", data);
dev_dbg()
> +
> + rtc = devm_rtc_device_register(&spi->dev, "max6916", &max6916_rtc_ops, THIS_MODULE);
> +
> +
> + if (IS_ERR(rtc))
> + return PTR_ERR(rtc);
What is wrong with this coding style?
> +
> + spi_set_drvdata(spi, rtc);
> +
> + return 0;
> +}
> +
> +static struct spi_driver max6916_driver = {
> + .driver = {
> + .name = "max6916",
> + },
> + .probe = max6916_probe,
> +};
> +
> +module_spi_driver(max6916_driver);
> +
> +MODULE_DESCRIPTION("MAX6916 SPI RTC DRIVER");
> +MODULE_AUTHOR("Venkat Prashanth B U <venkat.prashanth2498@...il.com>");
> +MODULE_LICENSE("GPL v2");
> +
> +
> +
> +
> +
> +
> +
> +
> +
Did you look at the output after creating the patch? Please double
check what you are sending. These empty lines do not look meaningful.
Go to Documentation/SubmittingPatches and follow the guidelines. And
run checkpatch once again.
Best regards,
Krzysztof
Powered by blists - more mailing lists