linux-kernel - [PATCH 2/3] iio: st_sensors: Disable DRDY at init time

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <52054a54539759100d9c926c78616858b12a2089.1463164919.git.leonard.crestez@intel.com>
Date:	Fri, 13 May 2016 21:43:34 +0300
From:	Crestez Dan Leonard <leonard.crestez@...el.com>
To:	Jonathan Cameron <jic23@...nel.org>, linux-iio@...r.kernel.org
Cc:	linux-kernel@...r.kernel.org, Hartmut Knaack <knaack.h@....de>,
	Lars-Peter Clausen <lars@...afoo.de>,
	Peter Meerwald-Stadler <pmeerw@...erw.net>,
	Daniel Baluta <daniel.baluta@...el.com>,
	Crestez Dan Leonard <leonard.crestez@...el.com>,
	Linus Walleij <linus.walleij@...aro.org>,
	Giuseppe Barba <giuseppe.barba@...com>,
	Denis Ciocca <denis.ciocca@...com>
Subject: [PATCH 2/3] iio: st_sensors: Disable DRDY at init time

This fixes odd behavior after reboot.

The fact that we set the device to powerdown mode is not sufficient to
prevent DRDY being active because we might still have an unread sample.

Even if powerdown was sufficient keeping DRDY disabled while trigger is
not active is a good idea.

Cc: Linus Walleij <linus.walleij@...aro.org>
Cc: Giuseppe Barba <giuseppe.barba@...com>
Cc: Denis Ciocca <denis.ciocca@...com>
Signed-off-by: Crestez Dan Leonard <leonard.crestez@...el.com>
---
 drivers/iio/common/st_sensors/st_sensors_core.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/iio/common/st_sensors/st_sensors_core.c b/drivers/iio/common/st_sensors/st_sensors_core.c
index 928ee68..9e59c90 100644
--- a/drivers/iio/common/st_sensors/st_sensors_core.c
+++ b/drivers/iio/common/st_sensors/st_sensors_core.c
@@ -363,6 +363,11 @@ int st_sensors_init_sensor(struct iio_dev *indio_dev,
 	if (err < 0)
 		return err;
 
+	/* Disable DRDY, this might be still be enabled after reboot. */
+	err = st_sensors_set_dataready_irq(indio_dev, false);
+	if (err < 0)
+		return err;
+
 	if (sdata->current_fullscale) {
 		err = st_sensors_set_fullscale(indio_dev,
 						sdata->current_fullscale->num);
-- 
2.5.5