[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1463343243-26429-17-git-send-email-krzk@kernel.org>
Date: Sun, 15 May 2016 22:13:57 +0200
From: Krzysztof Kozlowski <krzk@...nel.org>
To: Kukjin Kim <kgene@...nel.org>,
Krzysztof Kozlowski <k.kozlowski@...sung.com>,
Sylwester Nawrocki <s.nawrocki@...sung.com>,
Tomasz Figa <tomasz.figa@...il.com>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...eaurora.org>,
linux-arm-kernel@...ts.infradead.org,
linux-samsung-soc@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-clk@...r.kernel.org
Cc: Javier Martinez Canillas <javier@....samsung.com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzk@...nel.org>
Subject: [PATCH v4 16/22] ARM: dts: exynos: Add USB to Exynos5410
Move USB 3.0 DWC and 2.0 EHCI/OHCI nodes from exynos5420.dtsi to
exynos54xx.dtsi common for entire family. For Exynos542x/5800 this
should not have functional impact but for Exynos5410 this effectively
adds USB support.
Signed-off-by: Krzysztof Kozlowski <krzk@...nel.org>
Reviewed-by: Javier Martinez Canillas <javier@....samsung.com>
Tested-by: Javier Martinez Canillas <javier@....samsung.com>
---
arch/arm/boot/dts/exynos5410.dtsi | 39 +++++++++++
arch/arm/boot/dts/exynos5420.dtsi | 133 +++++++++++---------------------------
arch/arm/boot/dts/exynos54xx.dtsi | 79 ++++++++++++++++++++++
3 files changed, 157 insertions(+), 94 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi
index dba6875572f2..37bd8d419c5d 100644
--- a/arch/arm/boot/dts/exynos5410.dtsi
+++ b/arch/arm/boot/dts/exynos5410.dtsi
@@ -185,4 +185,43 @@
3 0 0x07000000 0x20000>;
};
+&usbdrd3_0 {
+ clocks = <&clock CLK_USBD300>;
+ clock-names = "usbdrd30";
+};
+
+&usbdrd_phy0 {
+ clocks = <&clock CLK_USBD300>, <&clock CLK_SCLK_USBPHY300>;
+ clock-names = "phy", "ref";
+ samsung,pmu-syscon = <&pmu_system_controller>;
+};
+
+&usbdrd3_1 {
+ clocks = <&clock CLK_USBD301>;
+ clock-names = "usbdrd30";
+};
+
+&usbdrd_phy1 {
+ clocks = <&clock CLK_USBD301>, <&clock CLK_SCLK_USBPHY301>;
+ clock-names = "phy", "ref";
+ samsung,pmu-syscon = <&pmu_system_controller>;
+};
+
+&usbhost1 {
+ clocks = <&clock CLK_USBH20>;
+ clock-names = "usbhost";
+};
+
+&usbhost2 {
+ clocks = <&clock CLK_USBH20>;
+ clock-names = "usbhost";
+};
+
+&usb2_phy {
+ clocks = <&clock CLK_USBH20>, <&clock CLK_SCLK_USBPHY300>;
+ clock-names = "phy", "ref";
+ samsung,sysreg-phandle = <&sysreg_system_controller>;
+ samsung,pmureg-phandle = <&pmu_system_controller>;
+};
+
#include "exynos5410-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index ebf2ed3c5ff8..8fa65eb8027d 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -41,8 +41,6 @@
spi0 = &spi_0;
spi1 = &spi_1;
spi2 = &spi_2;
- usbdrdphy0 = &usbdrd_phy0;
- usbdrdphy1 = &usbdrd_phy1;
};
/*
@@ -770,98 +768,6 @@
clock-names = "secss";
};
- usbdrd3_0: usb3-0 {
- compatible = "samsung,exynos5250-dwusb3";
- clocks = <&clock CLK_USBD300>;
- clock-names = "usbdrd30";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- usbdrd_dwc3_0: dwc3@...00000 {
- compatible = "snps,dwc3";
- reg = <0x12000000 0x10000>;
- interrupts = <0 72 0>;
- phys = <&usbdrd_phy0 0>, <&usbdrd_phy0 1>;
- phy-names = "usb2-phy", "usb3-phy";
- };
- };
-
- usbdrd_phy0: phy@...00000 {
- compatible = "samsung,exynos5420-usbdrd-phy";
- reg = <0x12100000 0x100>;
- clocks = <&clock CLK_USBD300>, <&clock CLK_SCLK_USBPHY300>;
- clock-names = "phy", "ref";
- samsung,pmu-syscon = <&pmu_system_controller>;
- #phy-cells = <1>;
- };
-
- usbdrd3_1: usb3-1 {
- compatible = "samsung,exynos5250-dwusb3";
- clocks = <&clock CLK_USBD301>;
- clock-names = "usbdrd30";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- usbdrd_dwc3_1: dwc3@...00000 {
- compatible = "snps,dwc3";
- reg = <0x12400000 0x10000>;
- interrupts = <0 73 0>;
- phys = <&usbdrd_phy1 0>, <&usbdrd_phy1 1>;
- phy-names = "usb2-phy", "usb3-phy";
- };
- };
-
- usbdrd_phy1: phy@...00000 {
- compatible = "samsung,exynos5420-usbdrd-phy";
- reg = <0x12500000 0x100>;
- clocks = <&clock CLK_USBD301>, <&clock CLK_SCLK_USBPHY301>;
- clock-names = "phy", "ref";
- samsung,pmu-syscon = <&pmu_system_controller>;
- #phy-cells = <1>;
- };
-
- usbhost2: usb@...10000 {
- compatible = "samsung,exynos4210-ehci";
- reg = <0x12110000 0x100>;
- interrupts = <0 71 0>;
-
- clocks = <&clock CLK_USBH20>;
- clock-names = "usbhost";
- #address-cells = <1>;
- #size-cells = <0>;
- port@0 {
- reg = <0>;
- phys = <&usb2_phy 1>;
- };
- };
-
- usbhost1: usb@...20000 {
- compatible = "samsung,exynos4210-ohci";
- reg = <0x12120000 0x100>;
- interrupts = <0 71 0>;
-
- clocks = <&clock CLK_USBH20>;
- clock-names = "usbhost";
- #address-cells = <1>;
- #size-cells = <0>;
- port@0 {
- reg = <0>;
- phys = <&usb2_phy 1>;
- };
- };
-
- usb2_phy: phy@...30000 {
- compatible = "samsung,exynos5250-usb2-phy";
- reg = <0x12130000 0x100>;
- clocks = <&clock CLK_USBH20>, <&clock CLK_SCLK_USBPHY300>;
- clock-names = "phy", "ref";
- #phy-cells = <1>;
- samsung,sysreg-phandle = <&sysreg_system_controller>;
- samsung,pmureg-phandle = <&pmu_system_controller>;
- };
-
sysmmu_g2dr: sysmmu@...0A60000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x10A60000 0x1000>;
@@ -1153,4 +1059,43 @@
clock-names = "uart", "clk_uart_baud0";
};
+&usbdrd3_0 {
+ clocks = <&clock CLK_USBD300>;
+ clock-names = "usbdrd30";
+};
+
+&usbdrd_phy0 {
+ clocks = <&clock CLK_USBD300>, <&clock CLK_SCLK_USBPHY300>;
+ clock-names = "phy", "ref";
+ samsung,pmu-syscon = <&pmu_system_controller>;
+};
+
+&usbdrd3_1 {
+ clocks = <&clock CLK_USBD301>;
+ clock-names = "usbdrd30";
+};
+
+&usbdrd_phy1 {
+ clocks = <&clock CLK_USBD301>, <&clock CLK_SCLK_USBPHY301>;
+ clock-names = "phy", "ref";
+ samsung,pmu-syscon = <&pmu_system_controller>;
+};
+
+&usbhost1 {
+ clocks = <&clock CLK_USBH20>;
+ clock-names = "usbhost";
+};
+
+&usbhost2 {
+ clocks = <&clock CLK_USBH20>;
+ clock-names = "usbhost";
+};
+
+&usb2_phy {
+ clocks = <&clock CLK_USBH20>, <&clock CLK_SCLK_USBPHY300>;
+ clock-names = "phy", "ref";
+ samsung,sysreg-phandle = <&sysreg_system_controller>;
+ samsung,pmureg-phandle = <&pmu_system_controller>;
+};
+
#include "exynos5420-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/exynos54xx.dtsi b/arch/arm/boot/dts/exynos54xx.dtsi
index 9ce625bd79c1..a9a062708237 100644
--- a/arch/arm/boot/dts/exynos54xx.dtsi
+++ b/arch/arm/boot/dts/exynos54xx.dtsi
@@ -20,6 +20,11 @@
/ {
compatible = "samsung,exynos5";
+ aliases {
+ usbdrdphy0 = &usbdrd_phy0;
+ usbdrdphy1 = &usbdrd_phy1;
+ };
+
soc: soc {
sysram@...20000 {
compatible = "mmio-sram";
@@ -64,5 +69,79 @@
<11 &gic 0 131 0>;
};
};
+
+ usbdrd3_0: usb3-0 {
+ compatible = "samsung,exynos5250-dwusb3";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ usbdrd_dwc3_0: dwc3@...00000 {
+ compatible = "snps,dwc3";
+ reg = <0x12000000 0x10000>;
+ interrupts = <0 72 0>;
+ phys = <&usbdrd_phy0 0>, <&usbdrd_phy0 1>;
+ phy-names = "usb2-phy", "usb3-phy";
+ };
+ };
+
+ usbdrd_phy0: phy@...00000 {
+ compatible = "samsung,exynos5420-usbdrd-phy";
+ reg = <0x12100000 0x100>;
+ #phy-cells = <1>;
+ };
+
+ usbdrd3_1: usb3-1 {
+ compatible = "samsung,exynos5250-dwusb3";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ usbdrd_dwc3_1: dwc3@...00000 {
+ compatible = "snps,dwc3";
+ reg = <0x12400000 0x10000>;
+ interrupts = <0 73 0>;
+ phys = <&usbdrd_phy1 0>, <&usbdrd_phy1 1>;
+ phy-names = "usb2-phy", "usb3-phy";
+ };
+ };
+
+ usbdrd_phy1: phy@...00000 {
+ compatible = "samsung,exynos5420-usbdrd-phy";
+ reg = <0x12500000 0x100>;
+ #phy-cells = <1>;
+ };
+
+ usbhost2: usb@...10000 {
+ compatible = "samsung,exynos4210-ehci";
+ reg = <0x12110000 0x100>;
+ interrupts = <0 71 0>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ phys = <&usb2_phy 1>;
+ };
+ };
+
+ usbhost1: usb@...20000 {
+ compatible = "samsung,exynos4210-ohci";
+ reg = <0x12120000 0x100>;
+ interrupts = <0 71 0>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ phys = <&usb2_phy 1>;
+ };
+ };
+
+ usb2_phy: phy@...30000 {
+ compatible = "samsung,exynos5250-usb2-phy";
+ reg = <0x12130000 0x100>;
+ #phy-cells = <1>;
+ };
};
};
--
2.5.0
Powered by blists - more mailing lists