| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1463478773-5916-8-git-send-email-abbotti@mev.co.uk>
Date: Tue, 17 May 2016 10:52:46 +0100
From: Ian Abbott <abbotti@....co.uk>
To: devel@...verdev.osuosl.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Ian Abbott <abbotti@....co.uk>,
H Hartley Sweeten <hsweeten@...ionengravers.com>,
linux-kernel@...r.kernel.org
Subject: [PATCH 07/14] staging: comedi: daqboard2000: rename acquisition control register macros
Rename the macros defining values for the acquisition control register
to avoid CamelCase, and to make it clearer which register they are
associated with.
Signed-off-by: Ian Abbott <abbotti@....co.uk>
---
drivers/staging/comedi/drivers/daqboard2000.c | 50 ++++++++++++---------------
1 file changed, 23 insertions(+), 27 deletions(-)
diff --git a/drivers/staging/comedi/drivers/daqboard2000.c b/drivers/staging/comedi/drivers/daqboard2000.c
index 92ff8f4..3634331 100644
--- a/drivers/staging/comedi/drivers/daqboard2000.c
+++ b/drivers/staging/comedi/drivers/daqboard2000.c
@@ -182,13 +182,13 @@ static const struct comedi_lrange range_daqboard2000_ai = {
#define DAQBOARD2000_REG_DIO_P2_EXP_IO_16_BIT(x) (0xc0 + (x) * 2) /* s16 */
/* Scan Sequencer programming */
-#define DAQBOARD2000_SeqStartScanList 0x0011
-#define DAQBOARD2000_SeqStopScanList 0x0010
+#define DAQBOARD2000_ACQ_CONTROL_SEQ_START_SCAN_LIST 0x0011
+#define DAQBOARD2000_ACQ_CONTROL_SEQ_STOP_SCAN_LIST 0x0010
/* Prepare for acquisition */
-#define DAQBOARD2000_AcqResetScanListFifo 0x0004
-#define DAQBOARD2000_AcqResetResultsFifo 0x0002
-#define DAQBOARD2000_AcqResetConfigPipe 0x0001
+#define DAQBOARD2000_ACQ_CONTROL_RESET_SCAN_LIST_FIFO 0x0004
+#define DAQBOARD2000_ACQ_CONTROL_RESET_RESULTS_FIFO 0x0002
+#define DAQBOARD2000_ACQ_CONTROL_RESET_CONFIG_PIPE 0x0001
/* Acqusition status bits */
#define DAQBOARD2000_AcqResultsFIFOMore1Sample 0x0001
@@ -203,20 +203,16 @@ static const struct comedi_lrange range_daqboard2000_ai = {
#define DAQBOARD2000_DacPacerOverrun 0x0200
#define DAQBOARD2000_AcqHardwareError 0x01c0
-/* Scan Sequencer programming */
-#define DAQBOARD2000_SeqStartScanList 0x0011
-#define DAQBOARD2000_SeqStopScanList 0x0010
-
/* Pacer Clock Control */
-#define DAQBOARD2000_AdcPacerInternal 0x0030
-#define DAQBOARD2000_AdcPacerExternal 0x0032
-#define DAQBOARD2000_AdcPacerEnable 0x0031
-#define DAQBOARD2000_AdcPacerEnableDacPacer 0x0034
-#define DAQBOARD2000_AdcPacerDisable 0x0030
-#define DAQBOARD2000_AdcPacerNormalMode 0x0060
-#define DAQBOARD2000_AdcPacerCompatibilityMode 0x0061
-#define DAQBOARD2000_AdcPacerInternalOutEnable 0x0008
-#define DAQBOARD2000_AdcPacerExternalRising 0x0100
+#define DAQBOARD2000_ACQ_CONTROL_ADC_PACER_INTERNAL 0x0030
+#define DAQBOARD2000_ACQ_CONTROL_ADC_PACER_EXTERNAL 0x0032
+#define DAQBOARD2000_ACQ_CONTROL_ADC_PACER_ENABLE 0x0031
+#define DAQBOARD2000_ACQ_CONTROL_ADC_PACER_ENABLE_DAC_PACER 0x0034
+#define DAQBOARD2000_ACQ_CONTROL_ADC_PACER_DISABLE 0x0030
+#define DAQBOARD2000_ACQ_CONTROL_ADC_PACER_NORMAL_MODE 0x0060
+#define DAQBOARD2000_ACQ_CONTROL_ADC_PACER_COMPATIBILITY_MODE 0x0061
+#define DAQBOARD2000_ACQ_CONTROL_ADC_PACER_INTERNAL_OUT_ENABLE 0x0008
+#define DAQBOARD2000_ACQ_CONTROL_ADC_PACER_EXTERNAL_RISING 0x0100
/* DAC status */
#define DAQBOARD2000_DacFull 0x0001
@@ -346,9 +342,9 @@ static int daqboard2000_ai_insn_read(struct comedi_device *dev,
int ret;
int i;
- writew(DAQBOARD2000_AcqResetScanListFifo |
- DAQBOARD2000_AcqResetResultsFifo |
- DAQBOARD2000_AcqResetConfigPipe,
+ writew(DAQBOARD2000_ACQ_CONTROL_RESET_SCAN_LIST_FIFO |
+ DAQBOARD2000_ACQ_CONTROL_RESET_RESULTS_FIFO |
+ DAQBOARD2000_ACQ_CONTROL_RESET_CONFIG_PIPE,
dev->mmio + DAQBOARD2000_REG_ACQ_CONTROL);
/*
@@ -371,7 +367,7 @@ static int daqboard2000_ai_insn_read(struct comedi_device *dev,
for (i = 0; i < insn->n; i++) {
setup_sampling(dev, chan, gain);
/* Enable reading from the scanlist FIFO */
- writew(DAQBOARD2000_SeqStartScanList,
+ writew(DAQBOARD2000_ACQ_CONTROL_SEQ_START_SCAN_LIST,
dev->mmio + DAQBOARD2000_REG_ACQ_CONTROL);
ret = comedi_timeout(dev, s, insn, daqboard2000_ai_status,
@@ -379,7 +375,7 @@ static int daqboard2000_ai_insn_read(struct comedi_device *dev,
if (ret)
return ret;
- writew(DAQBOARD2000_AdcPacerEnable,
+ writew(DAQBOARD2000_ACQ_CONTROL_ADC_PACER_ENABLE,
dev->mmio + DAQBOARD2000_REG_ACQ_CONTROL);
ret = comedi_timeout(dev, s, insn, daqboard2000_ai_status,
@@ -393,9 +389,9 @@ static int daqboard2000_ai_insn_read(struct comedi_device *dev,
return ret;
data[i] = readw(dev->mmio + DAQBOARD2000_REG_ACQ_RESULTS_FIFO);
- writew(DAQBOARD2000_AdcPacerDisable,
+ writew(DAQBOARD2000_ACQ_CONTROL_ADC_PACER_DISABLE,
dev->mmio + DAQBOARD2000_REG_ACQ_CONTROL);
- writew(DAQBOARD2000_SeqStopScanList,
+ writew(DAQBOARD2000_ACQ_CONTROL_SEQ_STOP_SCAN_LIST,
dev->mmio + DAQBOARD2000_REG_ACQ_CONTROL);
}
@@ -563,12 +559,12 @@ static void daqboard2000_adcDisarm(struct comedi_device *dev)
/* Stop the scan list FIFO from loading the configuration pipe */
udelay(2);
- writew(DAQBOARD2000_SeqStopScanList,
+ writew(DAQBOARD2000_ACQ_CONTROL_SEQ_STOP_SCAN_LIST,
dev->mmio + DAQBOARD2000_REG_ACQ_CONTROL);
/* Stop the pacer clock */
udelay(2);
- writew(DAQBOARD2000_AdcPacerDisable,
+ writew(DAQBOARD2000_ACQ_CONTROL_ADC_PACER_DISABLE,
dev->mmio + DAQBOARD2000_REG_ACQ_CONTROL);
/* Stop the input dma (abort channel 1) */
--
2.8.1
Powered by blists - more mailing lists