lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20160517011454.211928773@linuxfoundation.org>
Date:	Mon, 16 May 2016 18:15:23 -0700
From:	Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:	linux-kernel@...r.kernel.org
Cc:	Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
	stable@...r.kernel.org,
	Ben Hutchings <ben.hutchings@...ethink.co.uk>,
	Mark Brown <broonie@...nel.org>
Subject: [PATCH 4.4 53/73] spi: spi-ti-qspi: Handle truncated frames properly

4.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ben Hutchings <ben.hutchings@...ethink.co.uk>

commit 1ff7760ff66b98ef244bf0e5e2bd5310651205ad upstream.

We clamp frame_len_words to a maximum of 4096, but do not actually
limit the number of words written or read through the DATA registers
or the length added to spi_message::actual_length.  This results in
silent data corruption for commands longer than this maximum.

Recalculate the length of each transfer, taking frame_len_words into
account.  Use this length in qspi_{read,write}_msg(), and to increment
spi_message::actual_length.

Signed-off-by: Ben Hutchings <ben.hutchings@...ethink.co.uk>
Signed-off-by: Mark Brown <broonie@...nel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>

---
 drivers/spi/spi-ti-qspi.c |   32 ++++++++++++++++++++------------
 1 file changed, 20 insertions(+), 12 deletions(-)

--- a/drivers/spi/spi-ti-qspi.c
+++ b/drivers/spi/spi-ti-qspi.c
@@ -225,16 +225,16 @@ static inline int ti_qspi_poll_wc(struct
 	return  -ETIMEDOUT;
 }
 
-static int qspi_write_msg(struct ti_qspi *qspi, struct spi_transfer *t)
+static int qspi_write_msg(struct ti_qspi *qspi, struct spi_transfer *t,
+			  int count)
 {
-	int wlen, count, xfer_len;
+	int wlen, xfer_len;
 	unsigned int cmd;
 	const u8 *txbuf;
 	u32 data;
 
 	txbuf = t->tx_buf;
 	cmd = qspi->cmd | QSPI_WR_SNGL;
-	count = t->len;
 	wlen = t->bits_per_word >> 3;	/* in bytes */
 	xfer_len = wlen;
 
@@ -294,9 +294,10 @@ static int qspi_write_msg(struct ti_qspi
 	return 0;
 }
 
-static int qspi_read_msg(struct ti_qspi *qspi, struct spi_transfer *t)
+static int qspi_read_msg(struct ti_qspi *qspi, struct spi_transfer *t,
+			 int count)
 {
-	int wlen, count;
+	int wlen;
 	unsigned int cmd;
 	u8 *rxbuf;
 
@@ -313,7 +314,6 @@ static int qspi_read_msg(struct ti_qspi
 		cmd |= QSPI_RD_SNGL;
 		break;
 	}
-	count = t->len;
 	wlen = t->bits_per_word >> 3;	/* in bytes */
 
 	while (count) {
@@ -344,12 +344,13 @@ static int qspi_read_msg(struct ti_qspi
 	return 0;
 }
 
-static int qspi_transfer_msg(struct ti_qspi *qspi, struct spi_transfer *t)
+static int qspi_transfer_msg(struct ti_qspi *qspi, struct spi_transfer *t,
+			     int count)
 {
 	int ret;
 
 	if (t->tx_buf) {
-		ret = qspi_write_msg(qspi, t);
+		ret = qspi_write_msg(qspi, t, count);
 		if (ret) {
 			dev_dbg(qspi->dev, "Error while writing\n");
 			return ret;
@@ -357,7 +358,7 @@ static int qspi_transfer_msg(struct ti_q
 	}
 
 	if (t->rx_buf) {
-		ret = qspi_read_msg(qspi, t);
+		ret = qspi_read_msg(qspi, t, count);
 		if (ret) {
 			dev_dbg(qspi->dev, "Error while reading\n");
 			return ret;
@@ -374,7 +375,8 @@ static int ti_qspi_start_transfer_one(st
 	struct spi_device *spi = m->spi;
 	struct spi_transfer *t;
 	int status = 0, ret;
-	unsigned int frame_len_words;
+	unsigned int frame_len_words, transfer_len_words;
+	int wlen;
 
 	/* setup device control reg */
 	qspi->dc = 0;
@@ -404,14 +406,20 @@ static int ti_qspi_start_transfer_one(st
 		qspi->cmd = ((qspi->cmd & ~QSPI_WLEN_MASK) |
 			     QSPI_WLEN(t->bits_per_word));
 
-		ret = qspi_transfer_msg(qspi, t);
+		wlen = t->bits_per_word >> 3;
+		transfer_len_words = min(t->len / wlen, frame_len_words);
+
+		ret = qspi_transfer_msg(qspi, t, transfer_len_words * wlen);
 		if (ret) {
 			dev_dbg(qspi->dev, "transfer message failed\n");
 			mutex_unlock(&qspi->list_lock);
 			return -EINVAL;
 		}
 
-		m->actual_length += t->len;
+		m->actual_length += transfer_len_words * wlen;
+		frame_len_words -= transfer_len_words;
+		if (frame_len_words == 0)
+			break;
 	}
 
 	mutex_unlock(&qspi->list_lock);


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ