| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAKzfze-_hhRvi1k=ObAt9czyoPPBJZU32xASUfmebr3x+ded0w@mail.gmail.com>
Date: Wed, 18 May 2016 19:21:57 -0700
From: Matt Ranostay <mranostay@...il.com>
To: Cristina Moraru <cristina.moraru09@...il.com>
Cc: Jonathan Cameron <jic23@...nel.org>,
Hartmut Knaack <knaack.h@....de>,
Lars-Peter Clausen <lars@...afoo.de>,
Peter Meerwald-Stadler <pmeerw@...erw.net>,
Slawomir Stepien <sst@...zta.fm>, peda@...ntia.se,
manabian@...il.com,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-iio@...r.kernel.org" <linux-iio@...r.kernel.org>,
Daniel Baluta <daniel.baluta@...el.com>,
octavian.purdila@...el.com
Subject: Re: [PATCH v3] iio: max5487: Add support for Maxim digital potentiometers
Slight nitpick below.
On Tue, May 17, 2016 at 6:11 AM, Cristina Moraru
<cristina.moraru09@...il.com> wrote:
> Add implementation for Maxim MAX5487, MAX5488, MAX5489
> digital potentiometers.
>
> Datasheet:
> http://datasheets.maximintegrated.com/en/ds/MAX5487-MAX5489.pdf
>
> Signed-off-by: Cristina Moraru <cristina.moraru09@...il.com>
> CC: Daniel Baluta <daniel.baluta@...el.com>
> ---
> Changes since v2:
> Change switch statement in max5487_write_raw
> to if statement for consistency
> Add blank line before return statement
> Eliminate regmap support and use spi_write
> Use iio_device_register instead of devm_ version
> Changes since v1:
> Fix spacing
> Eliminate max5487_cfg struct
> Add kohms as driver data
>
> drivers/iio/potentiometer/Kconfig | 11 +++
> drivers/iio/potentiometer/Makefile | 1 +
> drivers/iio/potentiometer/max5487.c | 162 ++++++++++++++++++++++++++++++++++++
> 3 files changed, 174 insertions(+)
> create mode 100644 drivers/iio/potentiometer/max5487.c
>
> diff --git a/drivers/iio/potentiometer/Kconfig b/drivers/iio/potentiometer/Kconfig
> index 6acb238..bb77b50 100644
> --- a/drivers/iio/potentiometer/Kconfig
> +++ b/drivers/iio/potentiometer/Kconfig
> @@ -15,6 +15,17 @@ config DS1803
> To compile this driver as a module, choose M here: the
> module will be called ds1803.
>
> +config MAX5487
> + tristate "Maxim MAX5487/MAX5488/MAX5489 Digital Potentiometer driver"
> + depends on SPI
> + help
> + Say yes here to build support for the Maxim
> + MAX5487, MAX5488, MAX5489 digital potentiomenter
> + chips.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called max5487.
> +
> config MCP4131
> tristate "Microchip MCP413X/414X/415X/416X/423X/424X/425X/426X Digital Potentiometer driver"
> depends on SPI
> diff --git a/drivers/iio/potentiometer/Makefile b/drivers/iio/potentiometer/Makefile
> index 6007faa..8adb58f 100644
> --- a/drivers/iio/potentiometer/Makefile
> +++ b/drivers/iio/potentiometer/Makefile
> @@ -4,6 +4,7 @@
>
> # When adding new entries keep the list in alphabetical order
> obj-$(CONFIG_DS1803) += ds1803.o
> +obj-$(CONFIG_MAX5487) += max5487.o
> obj-$(CONFIG_MCP4131) += mcp4131.o
> obj-$(CONFIG_MCP4531) += mcp4531.o
> obj-$(CONFIG_TPL0102) += tpl0102.o
> diff --git a/drivers/iio/potentiometer/max5487.c b/drivers/iio/potentiometer/max5487.c
> new file mode 100644
> index 0000000..d5c9089
> --- /dev/null
> +++ b/drivers/iio/potentiometer/max5487.c
> @@ -0,0 +1,162 @@
> +/*
> + * max5487.c - Support for MAX5487, MAX5488, MAX5489 digital potentiometers
> + *
> + * Copyright (C) Cristina-Gabriela Moraru <cristina.moraru09@...il.com>
You'll want to put a year for the copyright.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + */
> +#include <linux/module.h>
> +#include <linux/spi/spi.h>
> +#include <linux/acpi.h>
> +
> +#include <linux/iio/sysfs.h>
> +#include <linux/iio/iio.h>
> +
> +#define MAX5487_WRITE_WIPER_A (0x01 << 8)
> +#define MAX5487_WRITE_WIPER_B (0x02 << 8)
> +
> +/* copy both wiper regs to NV regs */
> +#define MAX5487_COPY_AB_TO_NV (0x23 << 8)
> +/* copy both NV regs to wiper regs */
> +#define MAX5487_COPY_NV_TO_AB (0x33 << 8)
> +
> +#define MAX5487_MAX_POS 255
> +#define MAX5487_REG_SIZE 16
> +
> +struct max5487_data {
> + struct spi_device *spi;
> + int kohms;
> +};
> +
> +#define MAX5487_CHANNEL(ch, addr) { \
> + .type = IIO_RESISTANCE, \
> + .indexed = 1, \
> + .output = 1, \
> + .channel = ch, \
> + .address = addr, \
> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
> + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
> +}
> +
> +static const struct iio_chan_spec max5487_channels[] = {
> + MAX5487_CHANNEL(0, MAX5487_WRITE_WIPER_A),
> + MAX5487_CHANNEL(1, MAX5487_WRITE_WIPER_B),
> +};
> +
> +static int max5487_write_cmd(struct spi_device *spi, int cmd)
> +{
> + return spi_write(spi, (const void *) &cmd, MAX5487_REG_SIZE);
> +}
> +
> +static int max5487_read_raw(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan,
> + int *val, int *val2, long mask)
> +{
> + struct max5487_data *data = iio_priv(indio_dev);
> +
> + if (mask != IIO_CHAN_INFO_SCALE)
> + return -EINVAL;
> +
> + *val = 1000 * data->kohms;
> + *val2 = MAX5487_MAX_POS;
> +
> + return IIO_VAL_FRACTIONAL;
> +}
> +
> +static int max5487_write_raw(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan,
> + int val, int val2, long mask)
> +{
> + struct max5487_data *data = iio_priv(indio_dev);
> +
> + if (mask != IIO_CHAN_INFO_RAW)
> + return -EINVAL;
> +
> + if (val < 0 || val > MAX5487_MAX_POS)
> + return -EINVAL;
> +
> + return max5487_write_cmd(data->spi, chan->address | val);
> +}
> +
> +static const struct iio_info max5487_info = {
> + .read_raw = max5487_read_raw,
> + .write_raw = max5487_write_raw,
> + .driver_module = THIS_MODULE,
> +};
> +
> +static int max5487_spi_probe(struct spi_device *spi)
> +{
> + struct iio_dev *indio_dev;
> + struct max5487_data *data;
> + const struct spi_device_id *id = spi_get_device_id(spi);
> + int ret;
> +
> + indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*data));
> + if (!indio_dev)
> + return -ENOMEM;
> +
> + dev_set_drvdata(&spi->dev, indio_dev);
> + data = iio_priv(indio_dev);
> +
> + data->spi = spi;
> + data->kohms = id->driver_data;
> +
> + indio_dev->info = &max5487_info;
> + indio_dev->name = id->name;
> + indio_dev->dev.parent = &spi->dev;
> + indio_dev->modes = INDIO_DIRECT_MODE;
> + indio_dev->channels = max5487_channels;
> + indio_dev->num_channels = ARRAY_SIZE(max5487_channels);
> +
> + /* restore both wiper regs from NV regs */
> + ret = max5487_write_cmd(data->spi, MAX5487_COPY_NV_TO_AB);
> + if (ret < 0)
> + return ret;
> +
> + return iio_device_register(indio_dev);
> +}
> +
> +static int max5487_spi_remove(struct spi_device *spi)
> +{
> + struct iio_dev *indio_dev = dev_get_drvdata(&spi->dev);
> +
> + iio_device_unregister(indio_dev);
> +
> + /* save both wiper regs to NV regs */
> + return max5487_write_cmd(spi, MAX5487_COPY_AB_TO_NV);
> +}
> +
> +static const struct spi_device_id max5487_id[] = {
> + { "MAX5487", 10 },
> + { "MAX5488", 50 },
> + { "MAX5489", 100 },
> + { }
> +};
> +MODULE_DEVICE_TABLE(spi, max5487_id);
> +
> +static const struct acpi_device_id max5487_acpi_match[] = {
> + { "MAX5487", 10 },
> + { "MAX5488", 50 },
> + { "MAX5489", 100 },
> + { },
> +};
> +MODULE_DEVICE_TABLE(acpi, max5487_acpi_match);
> +
> +static struct spi_driver max5487_driver = {
> + .driver = {
> + .name = "max5487",
> + .owner = THIS_MODULE,
> + .acpi_match_table = ACPI_PTR(max5487_acpi_match),
> + },
> + .id_table = max5487_id,
> + .probe = max5487_spi_probe,
> + .remove = max5487_spi_remove
> +};
> +module_spi_driver(max5487_driver);
> +
> +MODULE_AUTHOR("Cristina-Gabriela Moraru <cristina.moraru09@...il.com>");
> +MODULE_DESCRIPTION("max5487 SPI driver");
> +MODULE_LICENSE("GPL v2");
> --
> 1.9.1
>
Powered by blists - more mailing lists