| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <573ECB74.8060502@ti.com>
Date: Fri, 20 May 2016 11:31:48 +0300
From: Roger Quadros <rogerq@...com>
To: Peter Chen <hzpeterchen@...il.com>
CC: Peter Chen <peter.chen@...escale.com>, <balbi@...nel.org>,
<tony@...mide.com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
<dan.j.williams@...el.com>, <mathias.nyman@...ux.intel.com>,
<Joao.Pinto@...opsys.com>, <sergei.shtylyov@...entembedded.com>,
<jun.li@...escale.com>, <grygorii.strashko@...com>,
<yoshihiro.shimoda.uh@...esas.com>, <robh@...nel.org>,
<nsekhar@...com>, <b-liu@...com>,
"linux-usb@...r.kernel.org" <linux-usb@...r.kernel.org>,
<linux-omap@...r.kernel.org>, lkml <linux-kernel@...r.kernel.org>,
<devicetree@...r.kernel.org>
Subject: Re: [PATCH v8 08/14] usb: otg: add OTG/dual-role core
On 18/05/16 15:59, Roger Quadros wrote:
> Hi Peter,
>
> On 18/05/16 10:45, Peter Chen wrote:
>>
>>
>> On Mon, May 16, 2016 at 5:00 PM, Roger Quadros <rogerq@...com <mailto:rogerq@...com>> wrote:
>>
>> On 13/05/16 13:03, Roger Quadros wrote:
>> > It provides APIs for the following tasks
>> >
>> > - Registering an OTG/dual-role capable controller
>> > - Registering Host and Gadget controllers to OTG core
>> > - Providing inputs to and kicking the OTG state machine
>> >
>> > Provide a dual-role device (DRD) state machine.
>> > DRD mode is a reduced functionality OTG mode. In this mode
>> > we don't support SRP, HNP and dynamic role-swap.
>> >
>> > In DRD operation, the controller mode (Host or Peripheral)
>> > is decided based on the ID pin status. Once a cable plug (Type-A
>> > or Type-B) is attached the controller selects the state
>> > and doesn't change till the cable in unplugged and a different
>> > cable type is inserted.
>> >
>> > As we don't need most of the complex OTG states and OTG timers
>> > we implement a lean DRD state machine in usb-otg.c.
>> > The DRD state machine is only interested in 2 hardware inputs
>> > 'id' and 'b_sess_vld'.
>> >
>> > Signed-off-by: Roger Quadros <rogerq@...com <mailto:rogerq@...com>>
>> > ---
>> > drivers/usb/common/Makefile | 2 +-
>> > drivers/usb/common/usb-otg.c | 1042 ++++++++++++++++++++++++++++++++++++++++++
>> > drivers/usb/core/Kconfig | 4 +-
>> > include/linux/usb/gadget.h | 2 +
>> > include/linux/usb/hcd.h | 1 +
>> > include/linux/usb/otg-fsm.h | 7 +
>> > include/linux/usb/otg.h | 154 ++++++-
>> > 7 files changed, 1206 insertions(+), 6 deletions(-)
>> > create mode 100644 drivers/usb/common/usb-otg.c
>>
>>
>> This patch causes the following build issues when CONFIG_USB_GADGET=m, CONFIG_USB=m,
>> CONFIG_USB_COMMON=m and CONFIG_USB_OTG=y
>>
>> ERROR: "usb_otg_register_gadget" [drivers/usb/gadget/udc/udc-core.ko] undefined!
>> ERROR: "usb_otg_unregister_gadget" [drivers/usb/gadget/udc/udc-core.ko] undefined!
>> ERROR: "usb_otg_register_hcd" [drivers/usb/core/usbcore.ko] undefined!
>> ERROR: "usb_otg_unregister_hcd" [drivers/usb/core/usbcore.ko] undefined!
>> ERROR: "otg_statemachine" [drivers/usb/chipidea/ci_hdrc.ko] undefined!
>> scripts/Makefile.modpost:91: recipe for target '__modpost' failed
>> make[1]: *** [__modpost] Error 1
>> Makefile:1141: recipe for target 'modules' failed
>> make: *** [modules] Error 2
>> make: *** Waiting for unfinished jobs....
>>
>> drivers/built-in.o: In function `drd_set_state':
>> usb-otg.c:(.text+0x2b4242): undefined reference to `usb_otg_state_string'
>> drivers/built-in.o: In function `drd_statemachine':
>> (.text+0x2b4b4c): undefined reference to `usb_otg_state_string'
>> Makefile:937: recipe for target 'vmlinux' failed
>>
>> I'll fix it up with the following diff.
>>
>> diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
>> index dca7856..16a5b55 100644
>> --- a/drivers/usb/Makefile
>> +++ b/drivers/usb/Makefile
>> @@ -59,5 +59,6 @@ obj-$(CONFIG_USB_RENESAS_USBHS) += renesas_usbhs/
>> obj-$(CONFIG_USB_GADGET) += gadget/
>>
>> obj-$(CONFIG_USB_COMMON) += common/
>> +obj-$(CONFIG_USB_OTG) += common/
>>
>> obj-$(CONFIG_USBIP_CORE) += usbip/
>> diff --git a/drivers/usb/common/usb-otg.c b/drivers/usb/common/usb-otg.c
>> index 77048aa..17e449e 100644
>> --- a/drivers/usb/common/usb-otg.c
>> +++ b/drivers/usb/common/usb-otg.c
>> @@ -56,6 +56,30 @@ static int usb_otg_hcd_is_primary_hcd(struct usb_hcd *hcd)
>> return hcd == hcd->primary_hcd;
>> }
>>
>> +static const char *otg_state_string(enum usb_otg_state state)
>> +{
>> + static const char *const names[] = {
>> + [OTG_STATE_A_IDLE] = "a_idle",
>> + [OTG_STATE_A_WAIT_VRISE] = "a_wait_vrise",
>> + [OTG_STATE_A_WAIT_BCON] = "a_wait_bcon",
>> + [OTG_STATE_A_HOST] = "a_host",
>> + [OTG_STATE_A_SUSPEND] = "a_suspend",
>> + [OTG_STATE_A_PERIPHERAL] = "a_peripheral",
>> + [OTG_STATE_A_WAIT_VFALL] = "a_wait_vfall",
>> + [OTG_STATE_A_VBUS_ERR] = "a_vbus_err",
>> + [OTG_STATE_B_IDLE] = "b_idle",
>> + [OTG_STATE_B_SRP_INIT] = "b_srp_init",
>> + [OTG_STATE_B_PERIPHERAL] = "b_peripheral",
>> + [OTG_STATE_B_WAIT_ACON] = "b_wait_acon",
>> + [OTG_STATE_B_HOST] = "b_host",
>> + };
>> +
>> + if (state < 0 || state >= ARRAY_SIZE(names))
>> + return "UNDEFINED";
>> +
>> + return names[state];
>> +}
>> +
>>
>>
>>
>> From my point, make another copy for otg stuff is not a good way,
>> could we make folder under usb/ named otg for dedicated otg stuffs,
>> in that case, build otg stuffs can not depend on USB_COMMON.
>
> OK. I can try that. I'll delete otg_state_string from usb-common.c and
> move it into usb/otg/usb-otg.c
>
> I'll also move usb-otg-fsm.c to usb/otg/.
But we can't delete usb_otg_state_string() from usb-common.c. That is used at a
number of places whether OTG is enabled or not.
One option is to make usb-common built in when otg is enabled. What do you say?
cheers,
-roger
>> /**
>> * Check if the OTG device is in our wait list and return
>> * otg_wait_data, else NULL.
>> @@ -433,7 +457,7 @@ static void drd_set_state(struct otg_fsm *fsm, enum usb_otg_state new_state)
>>
>> fsm->state_changed = 1;
>> dev_dbg(otg->dev, "otg: set state: %s\n",
>> - usb_otg_state_string(new_state));
>> + otg_state_string(new_state));
>> switch (new_state) {
>> case OTG_STATE_B_IDLE:
>> drd_set_protocol(fsm, PROTO_UNDEF);
>> @@ -449,7 +473,7 @@ static void drd_set_state(struct otg_fsm *fsm, enum usb_otg_state new_state)
>> break;
>> default:
>> dev_warn(otg->dev, "%s: otg: invalid state: %s\n",
>> - __func__, usb_otg_state_string(new_state));
>> + __func__, otg_state_string(new_state));
>> break;
>> }
>>
>> @@ -507,7 +531,7 @@ int drd_statemachine(struct usb_otg *otg)
>>
>> default:
>> dev_err(otg->dev, "%s: otg: invalid usb-drd state: %s\n",
>> - __func__, usb_otg_state_string(state));
>> + __func__, otg_state_string(state));
>> break;
>> }
>>
>> --
>> cheers,
>> -roger
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-usb" in
>> the body of a message to majordomo@...r.kernel.org <mailto:majordomo@...r.kernel.org>
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>
>>
>>
>>
>> --
>> BR,
>> Peter Chen
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
Powered by blists - more mailing lists