| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20160520094407.GB26584@arm.com>
Date: Fri, 20 May 2016 10:44:08 +0100
From: Chris Ryder <chris.ryder@....com>
To: Arnaldo Carvalho de Melo <acme@...nel.org>
Cc: linux-kernel@...r.kernel.org,
Peter Zijlstra <peterz@...radead.org>,
Ingo Molnar <mingo@...hat.com>,
Alexander Shishkin <alexander.shishkin@...ux.intel.com>,
linux-perf-users@...r.kernel.org,
Will Deacon <will.deacon@....com>,
Mark Rutland <mark.rutland@....com>
Subject: Re: [PATCH 3/7] pref annotate: Separate architecture specific
annotation support
On Thu, May 19, 2016 at 04:45:40PM -0300, Arnaldo Carvalho de Melo wrote:
> Em Thu, May 19, 2016 at 05:59:47PM +0100, Chris Ryder escreveu:
> > Currently the list of instructions recognised by perf annotate
> > contains an intermingled mix of x86 and ARM instructions, and the x86
> > instructions are unconditionally included on all platforms. This means
> > that perf attempts to parse x86 instructions on non-x86 platforms.
> > Refactor the instruction list into per-architecture header files so that
> > only the instructions applicable to the target architecture are parsed.
>
> How about annotating a perf.data file collected on ARM on a x86_64
> machine?
>
> I think we should have this keyed by the arch name and have all the
> tables available, using the one we get from the perf.data header.
Yes, that would be a better way to go - I'll take a look at doing it
that way.
>
> Look at the "[PATCH v4 2/6] perf tools: Promote proper messages for
> cross-platform unwind " patch, it has the bits you need to get the arch
> from the perf.data file header (session->machines->machine->env->arch)
Thanks for pointing me in the right direction,
Chris.
>
> I applied the first patch.
>
> - Arnaldo
>
> > Signed-off-by: Chris Ryder <chris.ryder@....com>
> > Acked-by: Pawel Moll <pawel.moll@....com>
> > Cc: Peter Zijlstra <peterz@...radead.org>
> > Cc: Ingo Molnar <mingo@...hat.com>
> > Cc: Arnaldo Carvalho de Melo <acme@...nel.org>
> > Cc: Alexander Shishkin <alexander.shishkin@...ux.intel.com>
> > Cc: linux-perf-users@...r.kernel.org
> > Cc: Will Deacon <will.deacon@....com>
> > Cc: Mark Rutland <mark.rutland@....com>
> > ---
> > tools/perf/arch/arm/include/annotate_ins.h | 25 +++++++
> > tools/perf/arch/x86/include/annotate_ins.h | 82 ++++++++++++++++++++++
> > tools/perf/config/Makefile | 11 +++
> > tools/perf/util/annotate.c | 105 +++--------------------------
> > tools/perf/util/annotate_ins.h | 10 +++
> > 5 files changed, 136 insertions(+), 97 deletions(-)
> > create mode 100644 tools/perf/arch/arm/include/annotate_ins.h
> > create mode 100644 tools/perf/arch/x86/include/annotate_ins.h
> > create mode 100644 tools/perf/util/annotate_ins.h
> >
> > diff --git a/tools/perf/arch/arm/include/annotate_ins.h b/tools/perf/arch/arm/include/annotate_ins.h
> > new file mode 100644
> > index 0000000..e8ea98d
> > --- /dev/null
> > +++ b/tools/perf/arch/arm/include/annotate_ins.h
> > @@ -0,0 +1,25 @@
> > +#ifndef ARCH_ANNOTATE_INS_H
> > +#define ARCH_ANNOTATE_INS_H
> > +
> > +#define ARCH_INSTRUCTIONS { \
> > + { .name = "add", .ops = &mov_ops, }, \
> > + { .name = "and", .ops = &mov_ops, }, \
> > + { .name = "b", .ops = &jump_ops, }, /* might also be a call */ \
> > + { .name = "bcc", .ops = &jump_ops, }, \
> > + { .name = "bcs", .ops = &jump_ops, }, \
> > + { .name = "beq", .ops = &jump_ops, }, \
> > + { .name = "bge", .ops = &jump_ops, }, \
> > + { .name = "bgt", .ops = &jump_ops, }, \
> > + { .name = "bhi", .ops = &jump_ops, }, \
> > + { .name = "bl", .ops = &call_ops, }, \
> > + { .name = "bls", .ops = &jump_ops, }, \
> > + { .name = "blt", .ops = &jump_ops, }, \
> > + { .name = "blx", .ops = &call_ops, }, \
> > + { .name = "bne", .ops = &jump_ops, }, \
> > + { .name = "cmp", .ops = &mov_ops, }, \
> > + { .name = "mov", .ops = &mov_ops, }, \
> > + { .name = "nop", .ops = &nop_ops, }, \
> > + { .name = "orr", .ops = &mov_ops, }, \
> > + }
> > +
> > +#endif /* ARCH_ANNOTATE_INS_H */
> > diff --git a/tools/perf/arch/x86/include/annotate_ins.h b/tools/perf/arch/x86/include/annotate_ins.h
> > new file mode 100644
> > index 0000000..179b50e
> > --- /dev/null
> > +++ b/tools/perf/arch/x86/include/annotate_ins.h
> > @@ -0,0 +1,82 @@
> > +#ifndef ARCH_ANNOTATE_INS_H
> > +#define ARCH_ANNOTATE_INS_H
> > +
> > +#define ARCH_INSTRUCTIONS { \
> > + { .name = "add", .ops = &mov_ops, }, \
> > + { .name = "addl", .ops = &mov_ops, }, \
> > + { .name = "addq", .ops = &mov_ops, }, \
> > + { .name = "addw", .ops = &mov_ops, }, \
> > + { .name = "and", .ops = &mov_ops, }, \
> > + { .name = "bts", .ops = &mov_ops, }, \
> > + { .name = "call", .ops = &call_ops, }, \
> > + { .name = "callq", .ops = &call_ops, }, \
> > + { .name = "cmp", .ops = &mov_ops, }, \
> > + { .name = "cmpb", .ops = &mov_ops, }, \
> > + { .name = "cmpl", .ops = &mov_ops, }, \
> > + { .name = "cmpq", .ops = &mov_ops, }, \
> > + { .name = "cmpw", .ops = &mov_ops, }, \
> > + { .name = "cmpxch", .ops = &mov_ops, }, \
> > + { .name = "dec", .ops = &dec_ops, }, \
> > + { .name = "decl", .ops = &dec_ops, }, \
> > + { .name = "imul", .ops = &mov_ops, }, \
> > + { .name = "inc", .ops = &dec_ops, }, \
> > + { .name = "incl", .ops = &dec_ops, }, \
> > + { .name = "ja", .ops = &jump_ops, }, \
> > + { .name = "jae", .ops = &jump_ops, }, \
> > + { .name = "jb", .ops = &jump_ops, }, \
> > + { .name = "jbe", .ops = &jump_ops, }, \
> > + { .name = "jc", .ops = &jump_ops, }, \
> > + { .name = "jcxz", .ops = &jump_ops, }, \
> > + { .name = "je", .ops = &jump_ops, }, \
> > + { .name = "jecxz", .ops = &jump_ops, }, \
> > + { .name = "jg", .ops = &jump_ops, }, \
> > + { .name = "jge", .ops = &jump_ops, }, \
> > + { .name = "jl", .ops = &jump_ops, }, \
> > + { .name = "jle", .ops = &jump_ops, }, \
> > + { .name = "jmp", .ops = &jump_ops, }, \
> > + { .name = "jmpq", .ops = &jump_ops, }, \
> > + { .name = "jna", .ops = &jump_ops, }, \
> > + { .name = "jnae", .ops = &jump_ops, }, \
> > + { .name = "jnb", .ops = &jump_ops, }, \
> > + { .name = "jnbe", .ops = &jump_ops, }, \
> > + { .name = "jnc", .ops = &jump_ops, }, \
> > + { .name = "jne", .ops = &jump_ops, }, \
> > + { .name = "jng", .ops = &jump_ops, }, \
> > + { .name = "jnge", .ops = &jump_ops, }, \
> > + { .name = "jnl", .ops = &jump_ops, }, \
> > + { .name = "jnle", .ops = &jump_ops, }, \
> > + { .name = "jno", .ops = &jump_ops, }, \
> > + { .name = "jnp", .ops = &jump_ops, }, \
> > + { .name = "jns", .ops = &jump_ops, }, \
> > + { .name = "jnz", .ops = &jump_ops, }, \
> > + { .name = "jo", .ops = &jump_ops, }, \
> > + { .name = "jp", .ops = &jump_ops, }, \
> > + { .name = "jpe", .ops = &jump_ops, }, \
> > + { .name = "jpo", .ops = &jump_ops, }, \
> > + { .name = "jrcxz", .ops = &jump_ops, }, \
> > + { .name = "js", .ops = &jump_ops, }, \
> > + { .name = "jz", .ops = &jump_ops, }, \
> > + { .name = "lea", .ops = &mov_ops, }, \
> > + { .name = "lock", .ops = &lock_ops, }, \
> > + { .name = "mov", .ops = &mov_ops, }, \
> > + { .name = "movb", .ops = &mov_ops, }, \
> > + { .name = "movdqa", .ops = &mov_ops, }, \
> > + { .name = "movl", .ops = &mov_ops, }, \
> > + { .name = "movq", .ops = &mov_ops, }, \
> > + { .name = "movslq", .ops = &mov_ops, }, \
> > + { .name = "movzbl", .ops = &mov_ops, }, \
> > + { .name = "movzwl", .ops = &mov_ops, }, \
> > + { .name = "nop", .ops = &nop_ops, }, \
> > + { .name = "nopl", .ops = &nop_ops, }, \
> > + { .name = "nopw", .ops = &nop_ops, }, \
> > + { .name = "or", .ops = &mov_ops, }, \
> > + { .name = "orl", .ops = &mov_ops, }, \
> > + { .name = "test", .ops = &mov_ops, }, \
> > + { .name = "testb", .ops = &mov_ops, }, \
> > + { .name = "testl", .ops = &mov_ops, }, \
> > + { .name = "xadd", .ops = &mov_ops, }, \
> > + { .name = "xbeginl", .ops = &jump_ops, }, \
> > + { .name = "xbeginq", .ops = &jump_ops, }, \
> > + }
> > +
> > +#endif /* ARCH_ANNOTATE_INS_H */
> > diff --git a/tools/perf/config/Makefile b/tools/perf/config/Makefile
> > index 1e46277..d3eba89 100644
> > --- a/tools/perf/config/Makefile
> > +++ b/tools/perf/config/Makefile
> > @@ -22,6 +22,7 @@ include $(srctree)/tools/scripts/Makefile.arch
> > $(call detected_var,ARCH)
> >
> > NO_PERF_REGS := 1
> > +NO_ANNOTATE_INS := 1
> >
> > # Additional ARCH settings for x86
> > ifeq ($(ARCH),x86)
> > @@ -35,10 +36,12 @@ ifeq ($(ARCH),x86)
> > LIBUNWIND_LIBS = -lunwind-x86 -llzma -lunwind
> > endif
> > NO_PERF_REGS := 0
> > + NO_ANNOTATE_INS := 0
> > endif
> >
> > ifeq ($(ARCH),arm)
> > NO_PERF_REGS := 0
> > + NO_ANNOTATE_INS := 0
> > LIBUNWIND_LIBS = -lunwind -lunwind-arm
> > endif
> >
> > @@ -51,6 +54,10 @@ ifeq ($(NO_PERF_REGS),0)
> > $(call detected,CONFIG_PERF_REGS)
> > endif
> >
> > +ifeq ($(NO_ANNOTATE_INS),0)
> > + $(call detected,CONFIG_ANNOTATE_INS)
> > +endif
> > +
> > # So far there's only x86 and arm libdw unwind support merged in perf.
> > # Disable it on all other architectures in case libdw unwind
> > # support is detected in system. Add supported architectures
> > @@ -83,6 +90,10 @@ ifeq ($(NO_PERF_REGS),0)
> > CFLAGS += -DHAVE_PERF_REGS_SUPPORT
> > endif
> >
> > +ifeq ($(NO_ANNOTATE_INS),0)
> > + CFLAGS += -DHAVE_ANNOTATE_INS_SUPPORT
> > +endif
> > +
> > # for linking with debug library, run like:
> > # make DEBUG=1 LIBDW_DIR=/opt/libdw/
> > ifdef LIBDW_DIR
> > diff --git a/tools/perf/util/annotate.c b/tools/perf/util/annotate.c
> > index 619bc27..71c1dd5 100644
> > --- a/tools/perf/util/annotate.c
> > +++ b/tools/perf/util/annotate.c
> > @@ -20,6 +20,7 @@
> > #include <regex.h>
> > #include <pthread.h>
> > #include <linux/bitops.h>
> > +#include "annotate_ins.h"
> >
> > const char *disassembler_style;
> > const char *objdump_path;
> > @@ -107,7 +108,7 @@ static int call__scnprintf(struct ins *ins, char *bf, size_t size,
> > return scnprintf(bf, size, "%-6.6s *%" PRIx64, ins->name, ops->target.addr);
> > }
> >
> > -static struct ins_ops call_ops = {
> > +static struct ins_ops call_ops __maybe_unused = {
> > .parse = call__parse,
> > .scnprintf = call__scnprintf,
> > };
> > @@ -137,7 +138,7 @@ static int jump__scnprintf(struct ins *ins, char *bf, size_t size,
> > return scnprintf(bf, size, "%-6.6s %" PRIx64, ins->name, ops->target.offset);
> > }
> >
> > -static struct ins_ops jump_ops = {
> > +static struct ins_ops jump_ops __maybe_unused = {
> > .parse = jump__parse,
> > .scnprintf = jump__scnprintf,
> > };
> > @@ -230,7 +231,7 @@ static void lock__delete(struct ins_operands *ops)
> > zfree(&ops->target.name);
> > }
> >
> > -static struct ins_ops lock_ops = {
> > +static struct ins_ops lock_ops __maybe_unused = {
> > .free = lock__delete,
> > .parse = lock__parse,
> > .scnprintf = lock__scnprintf,
> > @@ -298,7 +299,7 @@ static int mov__scnprintf(struct ins *ins, char *bf, size_t size,
> > ops->target.name ?: ops->target.raw);
> > }
> >
> > -static struct ins_ops mov_ops = {
> > +static struct ins_ops mov_ops __maybe_unused = {
> > .parse = mov__parse,
> > .scnprintf = mov__scnprintf,
> > };
> > @@ -339,7 +340,7 @@ static int dec__scnprintf(struct ins *ins, char *bf, size_t size,
> > ops->target.name ?: ops->target.raw);
> > }
> >
> > -static struct ins_ops dec_ops = {
> > +static struct ins_ops dec_ops __maybe_unused = {
> > .parse = dec__parse,
> > .scnprintf = dec__scnprintf,
> > };
> > @@ -350,101 +351,11 @@ static int nop__scnprintf(struct ins *ins __maybe_unused, char *bf, size_t size,
> > return scnprintf(bf, size, "%-6.6s", "nop");
> > }
> >
> > -static struct ins_ops nop_ops = {
> > +static struct ins_ops nop_ops __maybe_unused = {
> > .scnprintf = nop__scnprintf,
> > };
> >
> > -static struct ins instructions[] = {
> > - { .name = "add", .ops = &mov_ops, },
> > - { .name = "addl", .ops = &mov_ops, },
> > - { .name = "addq", .ops = &mov_ops, },
> > - { .name = "addw", .ops = &mov_ops, },
> > - { .name = "and", .ops = &mov_ops, },
> > -#ifdef __arm__
> > - { .name = "b", .ops = &jump_ops, }, // might also be a call
> > - { .name = "bcc", .ops = &jump_ops, },
> > - { .name = "bcs", .ops = &jump_ops, },
> > - { .name = "beq", .ops = &jump_ops, },
> > - { .name = "bge", .ops = &jump_ops, },
> > - { .name = "bgt", .ops = &jump_ops, },
> > - { .name = "bhi", .ops = &jump_ops, },
> > - { .name = "bl", .ops = &call_ops, },
> > - { .name = "bls", .ops = &jump_ops, },
> > - { .name = "blt", .ops = &jump_ops, },
> > - { .name = "blx", .ops = &call_ops, },
> > - { .name = "bne", .ops = &jump_ops, },
> > -#endif
> > - { .name = "bts", .ops = &mov_ops, },
> > - { .name = "call", .ops = &call_ops, },
> > - { .name = "callq", .ops = &call_ops, },
> > - { .name = "cmp", .ops = &mov_ops, },
> > - { .name = "cmpb", .ops = &mov_ops, },
> > - { .name = "cmpl", .ops = &mov_ops, },
> > - { .name = "cmpq", .ops = &mov_ops, },
> > - { .name = "cmpw", .ops = &mov_ops, },
> > - { .name = "cmpxch", .ops = &mov_ops, },
> > - { .name = "dec", .ops = &dec_ops, },
> > - { .name = "decl", .ops = &dec_ops, },
> > - { .name = "imul", .ops = &mov_ops, },
> > - { .name = "inc", .ops = &dec_ops, },
> > - { .name = "incl", .ops = &dec_ops, },
> > - { .name = "ja", .ops = &jump_ops, },
> > - { .name = "jae", .ops = &jump_ops, },
> > - { .name = "jb", .ops = &jump_ops, },
> > - { .name = "jbe", .ops = &jump_ops, },
> > - { .name = "jc", .ops = &jump_ops, },
> > - { .name = "jcxz", .ops = &jump_ops, },
> > - { .name = "je", .ops = &jump_ops, },
> > - { .name = "jecxz", .ops = &jump_ops, },
> > - { .name = "jg", .ops = &jump_ops, },
> > - { .name = "jge", .ops = &jump_ops, },
> > - { .name = "jl", .ops = &jump_ops, },
> > - { .name = "jle", .ops = &jump_ops, },
> > - { .name = "jmp", .ops = &jump_ops, },
> > - { .name = "jmpq", .ops = &jump_ops, },
> > - { .name = "jna", .ops = &jump_ops, },
> > - { .name = "jnae", .ops = &jump_ops, },
> > - { .name = "jnb", .ops = &jump_ops, },
> > - { .name = "jnbe", .ops = &jump_ops, },
> > - { .name = "jnc", .ops = &jump_ops, },
> > - { .name = "jne", .ops = &jump_ops, },
> > - { .name = "jng", .ops = &jump_ops, },
> > - { .name = "jnge", .ops = &jump_ops, },
> > - { .name = "jnl", .ops = &jump_ops, },
> > - { .name = "jnle", .ops = &jump_ops, },
> > - { .name = "jno", .ops = &jump_ops, },
> > - { .name = "jnp", .ops = &jump_ops, },
> > - { .name = "jns", .ops = &jump_ops, },
> > - { .name = "jnz", .ops = &jump_ops, },
> > - { .name = "jo", .ops = &jump_ops, },
> > - { .name = "jp", .ops = &jump_ops, },
> > - { .name = "jpe", .ops = &jump_ops, },
> > - { .name = "jpo", .ops = &jump_ops, },
> > - { .name = "jrcxz", .ops = &jump_ops, },
> > - { .name = "js", .ops = &jump_ops, },
> > - { .name = "jz", .ops = &jump_ops, },
> > - { .name = "lea", .ops = &mov_ops, },
> > - { .name = "lock", .ops = &lock_ops, },
> > - { .name = "mov", .ops = &mov_ops, },
> > - { .name = "movb", .ops = &mov_ops, },
> > - { .name = "movdqa",.ops = &mov_ops, },
> > - { .name = "movl", .ops = &mov_ops, },
> > - { .name = "movq", .ops = &mov_ops, },
> > - { .name = "movslq", .ops = &mov_ops, },
> > - { .name = "movzbl", .ops = &mov_ops, },
> > - { .name = "movzwl", .ops = &mov_ops, },
> > - { .name = "nop", .ops = &nop_ops, },
> > - { .name = "nopl", .ops = &nop_ops, },
> > - { .name = "nopw", .ops = &nop_ops, },
> > - { .name = "or", .ops = &mov_ops, },
> > - { .name = "orl", .ops = &mov_ops, },
> > - { .name = "test", .ops = &mov_ops, },
> > - { .name = "testb", .ops = &mov_ops, },
> > - { .name = "testl", .ops = &mov_ops, },
> > - { .name = "xadd", .ops = &mov_ops, },
> > - { .name = "xbeginl", .ops = &jump_ops, },
> > - { .name = "xbeginq", .ops = &jump_ops, },
> > -};
> > +static struct ins instructions[] = ARCH_INSTRUCTIONS;
> >
> > static int ins__key_cmp(const void *name, const void *insp)
> > {
> > diff --git a/tools/perf/util/annotate_ins.h b/tools/perf/util/annotate_ins.h
> > new file mode 100644
> > index 0000000..2ec9a05
> > --- /dev/null
> > +++ b/tools/perf/util/annotate_ins.h
> > @@ -0,0 +1,10 @@
> > +#ifndef __ANNOTATE_INS_H
> > +#define __ANNOTATE_INS_H
> > +
> > +#ifdef HAVE_ANNOTATE_INS_SUPPORT
> > +#include <annotate_ins.h>
> > +#else
> > +#define ARCH_INSTRUCTIONS { }
> > +#endif
> > +
> > +#endif /* __ANNOTATE_INS_H */
> > --
> > 2.1.4
>
Powered by blists - more mailing lists