[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1463752162-15181-8-git-send-email-abbotti@mev.co.uk>
Date: Fri, 20 May 2016 14:49:09 +0100
From: Ian Abbott <abbotti@....co.uk>
To: devel@...verdev.osuosl.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Ian Abbott <abbotti@....co.uk>,
H Hartley Sweeten <hsweeten@...ionengravers.com>,
linux-kernel@...r.kernel.org
Subject: [PATCH 07/20] staging: comedi: drivers: re-do PLX PCI 9080 BIGEND register values
Replace `enum bigend_bits` in "plx9080.h" with a bunch of macros
defining values for the BIGEND register. Use the prefix `PLX_BIGEND_`
for the macro names. Make use of the `BIT(x)` and `GENMASK(h,l)` macros
to define the values.
Signed-off-by: Ian Abbott <abbotti@....co.uk>
---
drivers/staging/comedi/drivers/cb_pcidas64.c | 2 +-
drivers/staging/comedi/drivers/gsc_hpdi.c | 2 +-
drivers/staging/comedi/drivers/plx9080.h | 33 +++++++++++++++-------------
3 files changed, 20 insertions(+), 17 deletions(-)
diff --git a/drivers/staging/comedi/drivers/cb_pcidas64.c b/drivers/staging/comedi/drivers/cb_pcidas64.c
index f997c1f..4a8e88a 100644
--- a/drivers/staging/comedi/drivers/cb_pcidas64.c
+++ b/drivers/staging/comedi/drivers/cb_pcidas64.c
@@ -1294,7 +1294,7 @@ static void init_plx9080(struct comedi_device *dev)
readl(devpriv->plx9080_iobase + PLX_REG_CNTRL);
#ifdef __BIG_ENDIAN
- bits = BIGEND_DMA0 | BIGEND_DMA1;
+ bits = PLX_BIGEND_DMA0 | PLX_BIGEND_DMA1;
#else
bits = 0;
#endif
diff --git a/drivers/staging/comedi/drivers/gsc_hpdi.c b/drivers/staging/comedi/drivers/gsc_hpdi.c
index e2831e1..536bebe 100644
--- a/drivers/staging/comedi/drivers/gsc_hpdi.c
+++ b/drivers/staging/comedi/drivers/gsc_hpdi.c
@@ -547,7 +547,7 @@ static void gsc_hpdi_init_plx9080(struct comedi_device *dev)
void __iomem *plx_iobase = devpriv->plx9080_mmio;
#ifdef __BIG_ENDIAN
- bits = BIGEND_DMA0 | BIGEND_DMA1;
+ bits = PLX_BIGEND_DMA0 | PLX_BIGEND_DMA1;
#else
bits = 0;
#endif
diff --git a/drivers/staging/comedi/drivers/plx9080.h b/drivers/staging/comedi/drivers/plx9080.h
index 0bcdbad..84dd366 100644
--- a/drivers/staging/comedi/drivers/plx9080.h
+++ b/drivers/staging/comedi/drivers/plx9080.h
@@ -125,21 +125,24 @@ struct plx_dma_desc {
/* Big/Little Endian Descriptor Register */
#define PLX_REG_BIGEND 0x000c
-enum bigend_bits {
- /* use big endian ordering for configuration register accesses */
- BIGEND_CONFIG = 0x1,
- BIGEND_DIRECT_MASTER = 0x2,
- BIGEND_DIRECT_SLAVE_LOCAL0 = 0x4,
- BIGEND_ROM = 0x8,
- /*
- * use byte lane consisting of most significant bits instead of
- * least significant
- */
- BIGEND_BYTE_LANE = 0x10,
- BIGEND_DIRECT_SLAVE_LOCAL1 = 0x20,
- BIGEND_DMA1 = 0x40,
- BIGEND_DMA0 = 0x80,
-};
+/* Configuration Register Big Endian Mode */
+#define PLX_BIGEND_CONFIG BIT(0)
+/* Direct Master Big Endian Mode */
+#define PLX_BIGEND_DM BIT(1)
+/* Direct Slave Address Space 0 Big Endian Mode */
+#define PLX_BIGEND_DSAS0 BIT(2)
+/* Direct Slave Expansion ROM Big Endian Mode */
+#define PLX_BIGEND_EROM BIT(3)
+/* Big Endian Byte Lane Mode - use most significant byte lanes */
+#define PLX_BIGEND_BEBLM BIT(4)
+/* Direct Slave Address Space 1 Big Endian Mode */
+#define PLX_BIGEND_DSAS1 BIT(5)
+/* DMA Channel 1 Big Endian Mode */
+#define PLX_BIGEND_DMA1 BIT(6)
+/* DMA Channel 0 Big Endian Mode */
+#define PLX_BIGEND_DMA0 BIT(7)
+/* DMA Channel N Big Endian Mode (N <= 1) */
+#define PLX_BIGEND_DMA(n) ((n) ? PLX_BIGEND_DMA1 : PLX_BIGEND_DMA0)
/*
** Note: The Expansion ROM stuff is only relevant to the PC environment.
--
2.8.1
Powered by blists - more mailing lists