linux-kernel - Re: [PATCH v2 03/12] of: add J-Core interrupt controller bindings

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20160523211342.GG21636@brightrain.aerifal.cx>
Date:	Mon, 23 May 2016 17:13:42 -0400
From:	Rich Felker <dalias@...c.org>
To:	Rob Herring <robh@...nel.org>
Cc:	devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
	linux-sh@...r.kernel.org,
	Ian Campbell <ijc+devicetree@...lion.org.uk>,
	Jason Cooper <jason@...edaemon.net>,
	Kumar Gala <galak@...eaurora.org>,
	Marc Zyngier <marc.zyngier@....com>,
	Mark Rutland <mark.rutland@....com>,
	Pawel Moll <pawel.moll@....com>,
	Thomas Gleixner <tglx@...utronix.de>
Subject: Re: [PATCH v2 03/12] of: add J-Core interrupt controller bindings

On Mon, May 23, 2016 at 03:53:20PM -0500, Rob Herring wrote:
> On Fri, May 20, 2016 at 02:53:04AM +0000, Rich Felker wrote:
> > Signed-off-by: Rich Felker <dalias@...c.org>
> > ---
> >  .../bindings/interrupt-controller/jcore,aic.txt    | 28 ++++++++++++++++++++++
> >  1 file changed, 28 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/interrupt-controller/jcore,aic.txt
> > 
> > diff --git a/Documentation/devicetree/bindings/interrupt-controller/jcore,aic.txt b/Documentation/devicetree/bindings/interrupt-controller/jcore,aic.txt
> > new file mode 100644
> > index 0000000..dc9fde8
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/interrupt-controller/jcore,aic.txt
> > @@ -0,0 +1,28 @@
> > +J-Core Advanced Interrupt Controller
> > +
> > +Required properties:
> > +
> > +- compatible : Should be "jcore,aic1" for the (obsolete) first-generation aic
> > +  with 8 interrupt lines with programmable priorities, or "jcore,aic2" for
> > +  the "aic2" core with 64 interrupts.
> > +
> > +- interrupt-controller : Identifies the node as an interrupt controller
> > +
> > +- #interrupt-cells : Specifies the number of cells needed to encode an
> > +  interrupt source. The value shall be 1.
> 
> No level/edge support? Need 2 cells if so.

No, all the logic is in hardware. From the software side you just need
handle_simple_irq or equivalent.

Rich