lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Message-ID: <1464078154-13157-2-git-send-email-andrew.goodbody@cambrionix.com> Date: Tue, 24 May 2016 09:22:33 +0100 From: Andrew Goodbody <andrew.goodbody@...brionix.com> To: <b-liu@...com> CC: <gregkh@...uxfoundation.org>, <linux-usb@...r.kernel.org>, <linux-kernel@...r.kernel.org>, Andrew Goodbody <andrew.goodbody@...brionix.com>, <stable@...r.kernel.org> Subject: [PATCH V3 1/2] usb: musb: Ensure rx reinit occurs for shared_fifo endpoints shared_fifo endpoints would only get a previous tx state cleared out, the rx state was only cleared for non shared_fifo endpoints Change this so that the rx state is cleared for all endpoints. This addresses an issue that resulted in rx packets being dropped silently. Signed-off-by: Andrew Goodbody <andrew.goodbody@...brionix.com> Cc: stable@...r.kernel.org --- V3 no change V2 removed debugging call drivers/usb/musb/musb_host.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index b7a02ce..e5b6aba 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -594,14 +594,13 @@ musb_rx_reinit(struct musb *musb, struct musb_qh *qh, u8 epnum) musb_writew(ep->regs, MUSB_TXCSR, 0); /* scrub all previous state, clearing toggle */ - } else { - csr = musb_readw(ep->regs, MUSB_RXCSR); - if (csr & MUSB_RXCSR_RXPKTRDY) - WARNING("rx%d, packet/%d ready?\n", ep->epnum, - musb_readw(ep->regs, MUSB_RXCOUNT)); - - musb_h_flush_rxfifo(ep, MUSB_RXCSR_CLRDATATOG); } + csr = musb_readw(ep->regs, MUSB_RXCSR); + if (csr & MUSB_RXCSR_RXPKTRDY) + WARNING("rx%d, packet/%d ready?\n", ep->epnum, + musb_readw(ep->regs, MUSB_RXCOUNT)); + + musb_h_flush_rxfifo(ep, MUSB_RXCSR_CLRDATATOG); /* target addr and (for multipoint) hub addr/port */ if (musb->is_multipoint) { -- 2.7.4
Powered by blists - more mailing lists