Message-Id: <1464119559-17203-1-git-send-email-andi@firstfloor.org>
Date:	Tue, 24 May 2016 12:52:36 -0700
From:	Andi Kleen <andi@...stfloor.org>
To:	acme@...nel.org
Cc:	jolsa@...nel.org, linux-kernel@...r.kernel.org,
	Andi Kleen <ak@...ux.intel.com>
Subject: [PATCH 1/4] perf stat: Basic support for TopDown in perf stat

From: Andi Kleen <ak@...ux.intel.com>

Add basic plumbing for TopDown in perf stat

TopDown is intended to replace the frontend cycles idle/
backend cycles idle metrics in standard perf stat output.
These metrics are not reliable in many workloads,
due to out of order effects.

This implements a new --topdown mode in perf stat
(similar to --transaction) that measures the pipe line
bottlenecks using standardized formulas. The measurement
can be all done with 5 counters (one fixed counter)

The result are four metrics:
FrontendBound, BackendBound, BadSpeculation, Retiring

that describe the CPU pipeline behavior on a high level.

FrontendBound and BackendBound
BadSpeculation is a higher

The full top down methology has many hierarchical metrics.
This implementation only supports level 1 which can be
collected without multiplexing. A full implementation
of top down on top of perf is available in pmu-tools toplev.
(http://github.com/andikleen/pmu-tools)

The current version works on Intel Core CPUs starting
with Sandy Bridge, and Atom CPUs starting with Silvermont.
In principle the generic metrics should be also implementable
on other out of order CPUs.

TopDown level 1 uses a set of abstracted metrics which
are generic to out of order CPU cores (although some
CPUs may not implement all of them):

topdown-total-slots   Available slots in the pipeline
topdown-slots-issued          Slots issued into the pipeline
topdown-slots-retired         Slots successfully retired
topdown-fetch-bubbles         Pipeline gaps in the frontend
topdown-recovery-bubbles  Pipeline gaps during recovery
                          from misspeculation

These metrics then allow to compute four useful metrics:
FrontendBound, BackendBound, Retiring, BadSpeculation.

Add a new --topdown options to enable events.
When --topdown is specified set up events for all topdown
events supported by the kernel.
Add topdown-* as a special case to the event parser, as is
needed for all events containing -.

The actual code to compute the metrics is in follow-on patches.

v2: Use standard sysctl read function.
v3: Move x86 specific code to arch/
v4: Enable --metric-only implicitly for topdown.
v5: Add --single-thread option to not force per core mode
v6: Fix output order of topdown metrics
v7: Allow combining with -d
v8: Remove --single-thread again
v9: Rename functions, adding arch_ and topdown_.
v10: Expand man page and describe TopDown better
Paste intro into commit description.
Print error when malloc fails.
Acked-by: Jiri Olsa <jolsa@...nel.org>
Signed-off-by: Andi Kleen <ak@...ux.intel.com>
---
 tools/perf/Documentation/perf-stat.txt |  32 +++++++++
 tools/perf/arch/x86/util/Build         |   1 +
 tools/perf/arch/x86/util/group.c       |  27 ++++++++
 tools/perf/builtin-stat.c              | 119 ++++++++++++++++++++++++++++++++-
 tools/perf/util/group.h                |   7 ++
 tools/perf/util/parse-events.l         |   1 +
 6 files changed, 184 insertions(+), 3 deletions(-)
 create mode 100644 tools/perf/arch/x86/util/group.c
 create mode 100644 tools/perf/util/group.h

diff --git a/tools/perf/Documentation/perf-stat.txt b/tools/perf/Documentation/perf-stat.txt
index 04f23b404bbc..d96ccd4844df 100644
--- a/tools/perf/Documentation/perf-stat.txt
+++ b/tools/perf/Documentation/perf-stat.txt
@@ -204,6 +204,38 @@ Aggregate counts per physical processor for system-wide mode measurements.
 --no-aggr::
 Do not aggregate counts across all monitored CPUs.
 
+--topdown::
+Print top down level 1 metrics if supported by the CPU. This allows to
+determine bottle necks in the CPU pipeline for CPU bound workloads,
+by breaking the cycles consumed down into frontend bound, backend bound,
+bad speculation and retiring.
+
+Frontend bound means that the CPU cannot fetch and decode instructions fast
+enough. Backend bound means that computation or memory access is the bottle
+neck. Bad Speculation means that the CPU wasted cycles due to branch
+mispredictions and similar issues. Retiring means that the CPU computed without
+an apparently bottleneck. The bottleneck is only the real bottleneck
+if the workload is actually bound by the CPU and not by something else.
+
+For best results it is usually a good idea to use it with interval
+mode like -I 1000, as the bottleneck of workloads can change often.
+
+The top down metrics are collected per core instead of per
+CPU thread. Per core mode is automatically enabled
+and -a (global monitoring) is needed, requiring root rights or
+perf.perf_event_paranoid=-1.
+
+Topdown uses the full Performance Monitoring Unit, and needs
+disabling of the NMI watchdog (as root):
+echo 0 > /proc/sys/kernel/nmi_watchdog
+for best results. Otherwise the bottlenecks may be inconsistent
+on workload with changing phases.
+
+This enables --metric-only, unless overriden with --no-metric-only.
+
+To interpret the results it is usually needed to know on which
+CPUs the workload runs on. If needed the CPUs can be forced using
+taskset.
 
 EXAMPLES
 --------
diff --git a/tools/perf/arch/x86/util/Build b/tools/perf/arch/x86/util/Build
index 465970370f3e..4cd8a16b1b7b 100644
--- a/tools/perf/arch/x86/util/Build
+++ b/tools/perf/arch/x86/util/Build
@@ -3,6 +3,7 @@ libperf-y += tsc.o
 libperf-y += pmu.o
 libperf-y += kvm-stat.o
 libperf-y += perf_regs.o
+libperf-y += group.o
 
 libperf-$(CONFIG_DWARF) += dwarf-regs.o
 libperf-$(CONFIG_BPF_PROLOGUE) += dwarf-regs.o
diff --git a/tools/perf/arch/x86/util/group.c b/tools/perf/arch/x86/util/group.c
new file mode 100644
index 000000000000..37f92aa39a5d
--- /dev/null
+++ b/tools/perf/arch/x86/util/group.c
@@ -0,0 +1,27 @@
+#include <stdio.h>
+#include "api/fs/fs.h"
+#include "util/group.h"
+
+/*
+ * Check whether we can use a group for top down.
+ * Without a group may get bad results due to multiplexing.
+ */
+bool arch_topdown_check_group(bool *warn)
+{
+	int n;
+
+	if (sysctl__read_int("kernel/nmi_watchdog", &n) < 0)
+		return false;
+	if (n > 0) {
+		*warn = true;
+		return false;
+	}
+	return true;
+}
+
+void arch_topdown_group_warn(void)
+{
+	fprintf(stderr,
+		"nmi_watchdog enabled with topdown. May give wrong results.\n"
+		"Disable with echo 0 > /proc/sys/kernel/nmi_watchdog\n");
+}
diff --git a/tools/perf/builtin-stat.c b/tools/perf/builtin-stat.c
index 715a1128daeb..dab184d86816 100644
--- a/tools/perf/builtin-stat.c
+++ b/tools/perf/builtin-stat.c
@@ -59,10 +59,13 @@
 #include "util/thread.h"
 #include "util/thread_map.h"
 #include "util/counts.h"
+#include "util/group.h"
 #include "util/session.h"
 #include "util/tool.h"
+#include "util/group.h"
 #include "asm/bug.h"
 
+#include <api/fs/fs.h>
 #include <stdlib.h>
 #include <sys/prctl.h>
 #include <locale.h>
@@ -98,6 +101,15 @@ static const char * transaction_limited_attrs = {
 	"}"
 };
 
+static const char * topdown_attrs[] = {
+	"topdown-total-slots",
+	"topdown-slots-retired",
+	"topdown-recovery-bubbles",
+	"topdown-fetch-bubbles",
+	"topdown-slots-issued",
+	NULL,
+};
+
 static struct perf_evlist	*evsel_list;
 
 static struct target target = {
@@ -112,6 +124,7 @@ static volatile pid_t		child_pid			= -1;
 static bool			null_run			=  false;
 static int			detailed_run			=  0;
 static bool			transaction_run;
+static bool			topdown_run			= false;
 static bool			big_num				=  true;
 static int			big_num_opt			=  -1;
 static const char		*csv_sep			= NULL;
@@ -124,6 +137,7 @@ static unsigned int		initial_delay			= 0;
 static unsigned int		unit_width			= 4; /* strlen("unit") */
 static bool			forever				= false;
 static bool			metric_only			= false;
+static bool			force_metric_only		= false;
 static struct timespec		ref_time;
 static struct cpu_map		*aggr_map;
 static aggr_get_id_t		aggr_get_id;
@@ -1520,6 +1534,14 @@ static int stat__set_big_num(const struct option *opt __maybe_unused,
 	return 0;
 }
 
+static int enable_metric_only(const struct option *opt __maybe_unused,
+			      const char *s __maybe_unused, int unset)
+{
+	force_metric_only = true;
+	metric_only = !unset;
+	return 0;
+}
+
 static const struct option stat_options[] = {
 	OPT_BOOLEAN('T', "transaction", &transaction_run,
 		    "hardware transaction statistics"),
@@ -1578,8 +1600,10 @@ static const struct option stat_options[] = {
 		     "aggregate counts per thread", AGGR_THREAD),
 	OPT_UINTEGER('D', "delay", &initial_delay,
 		     "ms to wait before starting measurement after program start"),
-	OPT_BOOLEAN(0, "metric-only", &metric_only,
-			"Only print computed metrics. No raw values"),
+	OPT_CALLBACK_NOOPT(0, "metric-only", &metric_only, NULL,
+			"Only print computed metrics. No raw values", enable_metric_only),
+	OPT_BOOLEAN(0, "topdown", &topdown_run,
+			"measure topdown level 1 statistics"),
 	OPT_END()
 };
 
@@ -1772,12 +1796,62 @@ static int perf_stat_init_aggr_mode_file(struct perf_stat *st)
 	return 0;
 }
 
+static int topdown_filter_events(const char **attr, char **str, bool use_group)
+{
+	int off = 0;
+	int i;
+	int len = 0;
+	char *s;
+
+	for (i = 0; attr[i]; i++) {
+		if (pmu_have_event("cpu", attr[i])) {
+			len += strlen(attr[i]) + 1;
+			attr[i - off] = attr[i];
+		} else
+			off++;
+	}
+	attr[i - off] = NULL;
+
+	*str = malloc(len + 1 + 2);
+	if (!*str)
+		return -1;
+	s = *str;
+	if (i - off == 0) {
+		*s = 0;
+		return 0;
+	}
+	if (use_group)
+		*s++ = '{';
+	for (i = 0; attr[i]; i++) {
+		strcpy(s, attr[i]);
+		s += strlen(s);
+		*s++ = ',';
+	}
+	if (use_group) {
+		s[-1] = '}';
+		*s = 0;
+	} else
+		s[-1] = 0;
+	return 0;
+}
+
+__weak bool arch_topdown_check_group(bool *warn)
+{
+	*warn = false;
+	return false;
+}
+
+__weak void arch_topdown_group_warn(void)
+{
+}
+
 /*
  * Add default attributes, if there were no attributes specified or
  * if -d/--detailed, -d -d or -d -d -d is used:
  */
 static int add_default_attributes(void)
 {
+	int err;
 	struct perf_event_attr default_attrs0[] = {
 
   { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_TASK_CLOCK		},
@@ -1896,7 +1970,6 @@ static int add_default_attributes(void)
 		return 0;
 
 	if (transaction_run) {
-		int err;
 		if (pmu_have_event("cpu", "cycles-ct") &&
 		    pmu_have_event("cpu", "el-start"))
 			err = parse_events(evsel_list, transaction_attrs, NULL);
@@ -1909,6 +1982,46 @@ static int add_default_attributes(void)
 		return 0;
 	}
 
+	if (topdown_run) {
+		char *str = NULL;
+		bool warn = false;
+
+		if (stat_config.aggr_mode != AGGR_GLOBAL &&
+		    stat_config.aggr_mode != AGGR_CORE) {
+			pr_err("top down event configuration requires --per-core mode\n");
+			return -1;
+		}
+		stat_config.aggr_mode = AGGR_CORE;
+		if (nr_cgroups || !target__has_cpu(&target)) {
+			pr_err("top down event configuration requires system-wide mode (-a)\n");
+			return -1;
+		}
+
+		if (!force_metric_only)
+			metric_only = true;
+		if (topdown_filter_events(topdown_attrs, &str,
+				arch_topdown_check_group(&warn)) < 0) {
+			pr_err("Out of memory\n");
+			return -1;
+		}
+		if (topdown_attrs[0] && str) {
+			if (warn)
+				arch_topdown_group_warn();
+			err = parse_events(evsel_list, str, NULL);
+			if (err) {
+				fprintf(stderr,
+					"Cannot set up top down events %s: %d\n",
+					str, err);
+				free(str);
+				return -1;
+			}
+		} else {
+			fprintf(stderr, "System does not support topdown\n");
+			return -1;
+		}
+		free(str);
+	}
+
 	if (!evsel_list->nr_entries) {
 		if (perf_evlist__add_default_attrs(evsel_list, default_attrs0) < 0)
 			return -1;
diff --git a/tools/perf/util/group.h b/tools/perf/util/group.h
new file mode 100644
index 000000000000..116debe7a995
--- /dev/null
+++ b/tools/perf/util/group.h
@@ -0,0 +1,7 @@
+#ifndef GROUP_H
+#define GROUP_H 1
+
+bool arch_topdown_check_group(bool *warn);
+void arch_topdown_group_warn(void);
+
+#endif
diff --git a/tools/perf/util/parse-events.l b/tools/perf/util/parse-events.l
index 1477fbc78993..744ebe3fa30f 100644
--- a/tools/perf/util/parse-events.l
+++ b/tools/perf/util/parse-events.l
@@ -259,6 +259,7 @@ cycles-ct					{ return str(yyscanner, PE_KERNEL_PMU_EVENT); }
 cycles-t					{ return str(yyscanner, PE_KERNEL_PMU_EVENT); }
 mem-loads					{ return str(yyscanner, PE_KERNEL_PMU_EVENT); }
 mem-stores					{ return str(yyscanner, PE_KERNEL_PMU_EVENT); }
+topdown-[a-z-]+					{ return str(yyscanner, PE_KERNEL_PMU_EVENT); }
 
 L1-dcache|l1-d|l1d|L1-data		|
 L1-icache|l1-i|l1i|L1-instruction	|
-- 
2.5.5

Powered by blists - more mailing lists