linux-kernel - [PATCH v2] mfd: stmpe: move platform data into mfd driver

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <1464178922-29927-1-git-send-email-linus.walleij@linaro.org>
Date:	Wed, 25 May 2016 14:22:02 +0200
From:	Linus Walleij <linus.walleij@...aro.org>
To:	Samuel Ortiz <sameo@...ux.intel.com>,
	Lee Jones <lee.jones@...aro.org>, linux-kernel@...r.kernel.org
Cc:	Linus Walleij <linus.walleij@...aro.org>,
	Patrice Chotard <patrice.chotard@...com>
Subject: [PATCH v2] mfd: stmpe: move platform data into mfd driver

The STMPE platform data is only populated from the device tree
in all existing users, so push the struct and make the OF case
the norm.

Cc: Patrice Chotard <patrice.chotard@...com>
Signed-off-by: Linus Walleij <linus.walleij@...aro.org>
---
ChangeLog v1->v2:
- Drop check for (!np) NULL device node: as Lee notices, this
  can no longer happen on a pure DT driver.
---
 drivers/mfd/stmpe.c       | 40 ++++++++++++++++++++++++++++------------
 include/linux/mfd/stmpe.h | 22 +---------------------
 2 files changed, 29 insertions(+), 33 deletions(-)

diff --git a/drivers/mfd/stmpe.c b/drivers/mfd/stmpe.c
index fb8f9e8b75df..94c7cc02fdab 100644
--- a/drivers/mfd/stmpe.c
+++ b/drivers/mfd/stmpe.c
@@ -23,6 +23,27 @@
 #include <linux/regulator/consumer.h>
 #include "stmpe.h"
 
+/**
+ * struct stmpe_platform_data - STMPE platform data
+ * @id: device id to distinguish between multiple STMPEs on the same board
+ * @blocks: bitmask of blocks to enable (use STMPE_BLOCK_*)
+ * @irq_trigger: IRQ trigger to use for the interrupt to the host
+ * @autosleep: bool to enable/disable stmpe autosleep
+ * @autosleep_timeout: inactivity timeout in milliseconds for autosleep
+ * @irq_over_gpio: true if gpio is used to get irq
+ * @irq_gpio: gpio number over which irq will be requested (significant only if
+ *	      irq_over_gpio is true)
+ */
+struct stmpe_platform_data {
+	int id;
+	unsigned int blocks;
+	unsigned int irq_trigger;
+	bool autosleep;
+	bool irq_over_gpio;
+	int irq_gpio;
+	int autosleep_timeout;
+};
+
 static int __stmpe_enable(struct stmpe *stmpe, unsigned int blocks)
 {
 	return stmpe->variant->enable(stmpe, blocks, true);
@@ -1187,24 +1208,19 @@ static void stmpe_of_probe(struct stmpe_platform_data *pdata,
 /* Called from client specific probe routines */
 int stmpe_probe(struct stmpe_client_info *ci, enum stmpe_partnum partnum)
 {
-	struct stmpe_platform_data *pdata = dev_get_platdata(ci->dev);
+	struct stmpe_platform_data *pdata;
 	struct device_node *np = ci->dev->of_node;
 	struct stmpe *stmpe;
 	int ret;
 
-	if (!pdata) {
-		if (!np)
-			return -EINVAL;
-
-		pdata = devm_kzalloc(ci->dev, sizeof(*pdata), GFP_KERNEL);
-		if (!pdata)
-			return -ENOMEM;
+	pdata = devm_kzalloc(ci->dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return -ENOMEM;
 
-		stmpe_of_probe(pdata, np);
+	stmpe_of_probe(pdata, np);
 
-		if (of_find_property(np, "interrupts", NULL) == NULL)
-			ci->irq = -1;
-	}
+	if (of_find_property(np, "interrupts", NULL) == NULL)
+		ci->irq = -1;
 
 	stmpe = devm_kzalloc(ci->dev, sizeof(struct stmpe), GFP_KERNEL);
 	if (!stmpe)
diff --git a/include/linux/mfd/stmpe.h b/include/linux/mfd/stmpe.h
index cb83883918a7..de748bc7525e 100644
--- a/include/linux/mfd/stmpe.h
+++ b/include/linux/mfd/stmpe.h
@@ -62,6 +62,7 @@ enum {
 
 struct stmpe_variant_info;
 struct stmpe_client_info;
+struct stmpe_platform_data;
 
 /**
  * struct stmpe - STMPE MFD structure
@@ -117,25 +118,4 @@ extern int stmpe_disable(struct stmpe *stmpe, unsigned int blocks);
 
 #define STMPE_GPIO_NOREQ_811_TOUCH	(0xf0)
 
-/**
- * struct stmpe_platform_data - STMPE platform data
- * @id: device id to distinguish between multiple STMPEs on the same board
- * @blocks: bitmask of blocks to enable (use STMPE_BLOCK_*)
- * @irq_trigger: IRQ trigger to use for the interrupt to the host
- * @autosleep: bool to enable/disable stmpe autosleep
- * @autosleep_timeout: inactivity timeout in milliseconds for autosleep
- * @irq_over_gpio: true if gpio is used to get irq
- * @irq_gpio: gpio number over which irq will be requested (significant only if
- *	      irq_over_gpio is true)
- */
-struct stmpe_platform_data {
-	int id;
-	unsigned int blocks;
-	unsigned int irq_trigger;
-	bool autosleep;
-	bool irq_over_gpio;
-	int irq_gpio;
-	int autosleep_timeout;
-};
-
 #endif
-- 
2.4.11