[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1464193783-5071-2-git-send-email-tthayer@opensource.altera.com>
Date: Wed, 25 May 2016 11:29:39 -0500
From: <tthayer@...nsource.altera.com>
To: <bp@...en8.de>, <dougthompson@...ssion.com>,
<m.chehab@...sung.com>, <robh+dt@...nel.org>, <pawel.moll@....com>,
<mark.rutland@....com>, <ijc+devicetree@...lion.org.uk>,
<galak@...eaurora.org>, <linux@....linux.org.uk>,
<dinguyen@...nsource.altera.com>, <grant.likely@...aro.org>
CC: <devicetree@...r.kernel.org>, <linux-doc@...r.kernel.org>,
<linux-edac@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>, <tthayer.linux@...il.com>,
<tthayer@...nsource.altera.com>
Subject: [PATCH 1/5] Documentation: dt: socfpga: Add interrupt-controller to ecc-manager
From: Thor Thayer <tthayer@...nsource.altera.com>
Designate the ECC Manager as an interrupt controller and add child
interrupts.
Signed-off-by: Thor Thayer <tthayer@...nsource.altera.com>
---
.../bindings/arm/altera/socfpga-eccmgr.txt | 14 +++++++++++++-
1 file changed, 13 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/arm/altera/socfpga-eccmgr.txt b/Documentation/devicetree/bindings/arm/altera/socfpga-eccmgr.txt
index 5a6b160..15eb0df 100644
--- a/Documentation/devicetree/bindings/arm/altera/socfpga-eccmgr.txt
+++ b/Documentation/devicetree/bindings/arm/altera/socfpga-eccmgr.txt
@@ -61,7 +61,9 @@ Required Properties:
- #address-cells: must be 1
- #size-cells: must be 1
- interrupts : Should be single bit error interrupt, then double bit error
- interrupt. Note the rising edge type.
+ interrupt.
+- interrupt-controller : boolean indicator that ECC Manager is an interrupt controller
+- #interrupt-cells : must be set to 2.
- ranges : standard definition, should translate from local addresses
Subcomponents:
@@ -70,11 +72,15 @@ L2 Cache ECC
Required Properties:
- compatible : Should be "altr,socfpga-a10-l2-ecc"
- reg : Address and size for ECC error interrupt clear registers.
+- interrupts : Should be single bit error interrupt, then double bit error
+ interrupt, in this order.
On-Chip RAM ECC
Required Properties:
- compatible : Should be "altr,socfpga-a10-ocram-ecc"
- reg : Address and size for ECC block registers.
+- interrupts : Should be single bit error interrupt, then double bit error
+ interrupt, in this order.
Example:
@@ -85,15 +91,21 @@ Example:
#size-cells = <1>;
interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>,
<0 0 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
ranges;
l2-ecc@...06010 {
compatible = "altr,socfpga-a10-l2-ecc";
reg = <0xffd06010 0x4>;
+ interrupts = <0 IRQ_TYPE_LEVEL_HIGH>,
+ <32 IRQ_TYPE_LEVEL_HIGH>;
};
ocram-ecc@...c3000 {
compatible = "altr,socfpga-a10-ocram-ecc";
reg = <0xff8c3000 0x90>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH>,
+ <33 IRQ_TYPE_LEVEL_HIGH> ;
};
};
--
1.7.9.5
Powered by blists - more mailing lists