linux-kernel - Re: [RFC 1/1] drivers: i2c: omap: Add slave support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <CAKDJKT4Ws3XusYJTkojjeMvwxc2R9BRYpmn6HwGOH_8QF+pe0A@mail.gmail.com>
Date:	Thu, 26 May 2016 21:37:21 +0530
From:	Manish Badarkhe <badarkhe.manish@...il.com>
To:	Ravikumar Kattekola <rk@...com>
Cc:	Tony Lindgren <tony@...mide.com>, wsa@...-dreams.de,
	linux-omap@...r.kernel.org, linux-i2c@...r.kernel.org,
	"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: [RFC 1/1] drivers: i2c: omap: Add slave support

Hi Ravikumar

Some sanity comments, just good to have.

> +#ifdef CONFIG_I2C_SLAVE
> +static int omap_i2c_slave_irq(struct omap_i2c_dev *omap)
> +{
> +       u16 stat_raw;
> +       u16 stat;
> +       u16 bits;
> +       u8 value;
> +
> +       stat_raw = omap_i2c_read_reg(omap, OMAP_I2C_IP_V2_IRQSTATUS_RAW);
> +       bits = omap_i2c_read_reg(omap, OMAP_I2C_IE_REG);
> +       stat_raw &= bits;
> +
> +       if (stat_raw & OMAP_I2C_STAT_AAS) {
> +               omap_i2c_ack_stat(omap, OMAP_I2C_STAT_AAS);
> +               stat_raw &= ~OMAP_I2C_STAT_AAS;
> +       }
> +
> +out:
> +       return 0;
> +}
> +#endif

This function always return 0.

> +#ifdef CONFIG_I2C_SLAVE
> +static int omap_i2c_reg_slave(struct i2c_client *slave)
> +{
> +       struct omap_i2c_dev *omap = i2c_get_adapdata(slave->adapter);
> +       u16 reg;
> +       int ret = 0;
> +       /* Enable necessary interrupts */
> +       omap_i2c_write_reg(omap, OMAP_I2C_IE_REG, omap->iestate);
> +
> +       return 0;
> +
> +}

Better to return "ret" here as already been initialized to 0

> +
> +static int omap_i2c_unreg_slave(struct i2c_client *slave)
> +{
> +       struct omap_i2c_dev *omap = i2c_get_adapdata(slave->adapter);
> +       u16 reg;
> +
> +       pm_runtime_put(omap->dev);
> +       return 0;
> +}
> +#endif

This function always return 0


Regards
Manish Badarkhe