lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1464227772-31255-1-git-send-email-shawn.lin@rock-chips.com>
Date:	Thu, 26 May 2016 09:56:12 +0800
From:	Shawn Lin <shawn.lin@...k-chips.com>
To:	Ulf Hansson <ulf.hansson@...aro.org>
Cc:	Adrian Hunter <adrian.hunter@...el.com>,
	Jaehoon Chung <jh80.chung@...sung.com>,
	Michal Simek <michal.simek@...inx.com>,
	soren.brinkmann@...inx.com, Rob Herring <robh+dt@...nel.org>,
	linux-mmc@...r.kernel.org, linux-kernel@...r.kernel.org,
	Doug Anderson <dianders@...omium.org>,
	Brian Norris <briannorris@...omium.org>,
	Heiko Stuebner <heiko@...ech.de>,
	linux-rockchip@...ts.infradead.org, devicetree@...r.kernel.org,
	Shawn Lin <shawn.lin@...k-chips.com>
Subject: [PATCH v6 2/5] mmc: core: add mmc-hs400-enhanced-strobe support

This patch introduce mmc-hs400-enhanced-strobe for platforms
which want to enable enhanced strobe function from DT if the
mmc host controller claims to support enhanced strobe.

Signed-off-by: Shawn Lin <shawn.lin@...k-chips.com>

Reviewed-by: Douglas Anderson <dianders@...omium.org>
Tested-by: Jaehoon Chung <jh80.chung@...sung.com>
---

Changes in v6:
- add Doug's review-tag and Jaehoon's test-tag

Changes in v5:
- avoid to call hs400_enhanced+_strobe in mmc_set_initial_state
  if no setting MMC_CAP2_HS400_ES.
- add Adrian's ack for patch[5/5]

Changes in v4:
- check avail_type with EXT_CSD_CARD_TYPE_HS400 instead of
  card_type
- check if host support 8-bit when selecting hs400es
- some minor fix suggested by Douglas and add his review tag

Changes in v3:
- remove helper function and shorten cap2 to MMC_CAP2_HS400_ES
- rename callback to hs400_enhanced_strobe and make it return void
- add enhanced_strobe in mmc_ios and pass it to hs400_enhanced_strobe
- disable host's enhanced strobe in mmc_set_initial_state
- remove bus checking after switching hs400es
- add new function for hs400es timing selection
- fix wrong judgement of mmc_card_hs400es

Changes in v2:
- switch to HS400ES from Highspeed mode directly

 drivers/mmc/core/host.c  | 2 ++
 include/linux/mmc/host.h | 1 +
 2 files changed, 3 insertions(+)

diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c
index e0a3ee1..45773e4 100644
--- a/drivers/mmc/core/host.c
+++ b/drivers/mmc/core/host.c
@@ -289,6 +289,8 @@ int mmc_of_parse(struct mmc_host *host)
 		host->caps2 |= MMC_CAP2_HS400_1_8V | MMC_CAP2_HS200_1_8V_SDR;
 	if (of_property_read_bool(np, "mmc-hs400-1_2v"))
 		host->caps2 |= MMC_CAP2_HS400_1_2V | MMC_CAP2_HS200_1_2V_SDR;
+	if (of_property_read_bool(np, "mmc-hs400-enhanced-strobe"))
+		host->caps2 |= MMC_CAP2_HS400_ES;
 
 	host->dsr_req = !of_property_read_u32(np, "dsr", &host->dsr);
 	if (host->dsr_req && (host->dsr & ~0xffff)) {
diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
index 85800b4..2a06fb0 100644
--- a/include/linux/mmc/host.h
+++ b/include/linux/mmc/host.h
@@ -302,6 +302,7 @@ struct mmc_host {
 #define MMC_CAP2_SDIO_IRQ_NOTHREAD (1 << 17)
 #define MMC_CAP2_NO_WRITE_PROTECT (1 << 18)	/* No physical write protect pin, assume that card is always read-write */
 #define MMC_CAP2_NO_SDIO	(1 << 19)	/* Do not send SDIO commands during initialization */
+#define MMC_CAP2_HS400_ES	(1 << 20)	/* Host supports enhanced strobe */
 
 	mmc_pm_flag_t		pm_caps;	/* supported pm features */
 
-- 
2.3.7


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ