| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1464428033-52106-5-git-send-email-wangkefeng.wang@huawei.com>
Date: Sat, 28 May 2016 17:33:53 +0800
From: Kefeng Wang <wangkefeng.wang@...wei.com>
To: Thomas Gleixner <tglx@...utronix.de>,
Daniel Lezcano <daniel.lezcano@...aro.org>,
Rob Herring <robh+dt@...nel.org>
CC: <linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <guohanjun@...wei.com>,
<wangkefeng.wang@...wei.com>, Sudeep Holla <sudeep.holla@....com>,
Arnd Bergmann <arnd@...db.de>, <xuwei5@...ilicon.com>
Subject: [PATCH 4/4] clocksource: sp804: support 64bit mode for hisilicon timer64
There is a kind of 64bit mode timer in hisilicon soc(like Hip05, Hip06 and
some arm32 soc), it is very similar with ARM sp804 Dual Timers, but TimerX
LOAD/Value/BGLoad are 64bit(two 32bit regs), and reg offset is different.
Signed-off-by: Kefeng Wang <wangkefeng.wang@...wei.com>
---
.../devicetree/bindings/timer/arm,sp804.txt | 1 +
drivers/clocksource/timer-sp.h | 1 +
drivers/clocksource/timer-sp804.c | 76 ++++++++++++++++++----
3 files changed, 66 insertions(+), 12 deletions(-)
diff --git a/Documentation/devicetree/bindings/timer/arm,sp804.txt b/Documentation/devicetree/bindings/timer/arm,sp804.txt
index 5cd8eee7..d8e8f8f 100644
--- a/Documentation/devicetree/bindings/timer/arm,sp804.txt
+++ b/Documentation/devicetree/bindings/timer/arm,sp804.txt
@@ -17,6 +17,7 @@ Optional properties:
- arm,sp804-has-irq = <#>: In the case of only 1 timer irq line connected, this
specifies if the irq connection is for timer 1 or timer 2. A value of 1
or 2 should be used.
+- hisilicon,timer64: Support hisilicon 64bit mode timer.
Example:
diff --git a/drivers/clocksource/timer-sp.h b/drivers/clocksource/timer-sp.h
index 050d885..adf82f4 100644
--- a/drivers/clocksource/timer-sp.h
+++ b/drivers/clocksource/timer-sp.h
@@ -16,6 +16,7 @@
#define TIMER_VALUE 0x04 /* ACVR ro */
#define TIMER_CTRL 0x08 /* ACVR rw */
#define TIMER_CTRL_ONESHOT (1 << 0) /* CVR */
+/* Used in hisilicon timer64, it means enabling 64bit mode */
#define TIMER_CTRL_32BIT (1 << 1) /* CVR */
#define TIMER_CTRL_DIV1 (0 << 2) /* ACVR */
#define TIMER_CTRL_DIV16 (1 << 2) /* ACVR */
diff --git a/drivers/clocksource/timer-sp804.c b/drivers/clocksource/timer-sp804.c
index 2ff8777..7f1d947 100644
--- a/drivers/clocksource/timer-sp804.c
+++ b/drivers/clocksource/timer-sp804.c
@@ -34,6 +34,16 @@
#include "timer-sp.h"
+#define TIMER64_2_BASE 0x40
+#define TIMER64_LOAD_L 0x00
+#define TIMER64_LOAD_H 0x04
+#define TIMER64_VALUE_L 0x08
+#define TIMER64_VALUE_H 0x0C
+
+#define HISI_OFFSET 0x8
+
+static int timer64_offset;
+
static long __init sp804_get_clock_rate(struct clk *clk, const char *name)
{
long rate;
@@ -78,8 +88,8 @@ static inline void sp804_load_mode_set(void __iomem *base, unsigned long load, i
unsigned long ctrl = TIMER_CTRL_32BIT | TIMER_CTRL_IE |
mode | TIMER_CTRL_ENABLE;
- writel(load, base + TIMER_LOAD);
- writel(ctrl, base + TIMER_CTRL);
+ writel(load, base + TIMER_LOAD); /* equal TIMER64_LOAD_L when timer64*/
+ writel(ctrl, base + TIMER_CTRL + timer64_offset);
}
static void __iomem *sched_clock_base;
@@ -89,11 +99,37 @@ static u64 notrace sp804_read(void)
return ~readl_relaxed(sched_clock_base + TIMER_VALUE);
}
+static u64 notrace hisi_timer64_read(void)
+{
+ u32 val_lo, val_hi, tmp_hi;
+
+ do {
+ val_hi = readl_relaxed(sched_clock_base + TIMER64_VALUE_H);
+ val_lo = readl_relaxed(sched_clock_base + TIMER64_VALUE_L);
+ tmp_hi = readl_relaxed(sched_clock_base + TIMER64_VALUE_H);
+ } while (val_hi != tmp_hi);
+
+ return ((u64) val_hi << 32) | val_lo;
+}
+
void __init sp804_timer_disable(void __iomem *base)
{
- writel(0, base + TIMER_CTRL);
+ writel(0, base + TIMER_CTRL + timer64_offset);
}
+static cycle_t hisi_clocksource_read(struct clocksource *cs)
+{
+ return hisi_timer64_read();
+}
+
+static struct clocksource hisi_clocksource = {
+ .name = "hisilicon_timer64",
+ .rating = 200,
+ .read = hisi_clocksource_read,
+ .mask = CLOCKSOURCE_MASK(64),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
void __init __sp804_clocksource_and_sched_clock_init(void __iomem *base,
const char *name,
struct clk *clk,
@@ -106,15 +142,25 @@ void __init __sp804_clocksource_and_sched_clock_init(void __iomem *base,
/* setup timer 0 as free-running clocksource */
sp804_timer_disable(base);
- writel(0xffffffff, base + TIMER_VALUE);
+ writel(0xffffffff, base + TIMER_VALUE); /* equal TIMER64_LOAD_H when tiemr64*/
+ if (timer64_offset) {
+ writel(0xffffffff, base + TIMER64_VALUE_L);
+ writel(0xffffffff, base + TIMER64_VALUE_H);
+ }
sp804_load_mode_set(base, 0xffffffff, TIMER_CTRL_PERIODIC & ~TIMER_CTRL_IE);
- clocksource_mmio_init(base + TIMER_VALUE, name,
- rate, 200, 32, clocksource_mmio_readl_down);
+ if (timer64_offset)
+ clocksource_register_hz(&hisi_clocksource, rate);
+ else
+ clocksource_mmio_init(base + TIMER_VALUE, name, rate, 200, 32,
+ clocksource_mmio_readl_down);
if (use_sched_clock) {
sched_clock_base = base;
- sched_clock_register(sp804_read, 32, rate);
+ if (timer64_offset)
+ sched_clock_register(hisi_timer64_read, 64, rate);
+ else
+ sched_clock_register(sp804_read, 32, rate);
}
}
@@ -130,7 +176,7 @@ static irqreturn_t sp804_timer_interrupt(int irq, void *dev_id)
struct clock_event_device *evt = dev_id;
/* clear the interrupt */
- writel(1, clkevt_base + TIMER_INTCLR);
+ writel(1, clkevt_base + TIMER_INTCLR + timer64_offset);
evt->event_handler(evt);
@@ -139,7 +185,7 @@ static irqreturn_t sp804_timer_interrupt(int irq, void *dev_id)
static inline void timer_shutdown(struct clock_event_device *evt)
{
- writel(0, clkevt_base + TIMER_CTRL);
+ writel(0, clkevt_base + TIMER_CTRL + timer64_offset);
}
static int sp804_shutdown(struct clock_event_device *evt)
@@ -204,6 +250,7 @@ void __init __sp804_clockevents_init(void __iomem *base, unsigned int irq, struc
static void __init sp804_of_init(struct device_node *np)
{
static bool initialized = false;
+ int timer_2_base = TIMER_2_BASE;
void __iomem *base;
int irq;
u32 irq_num = 0;
@@ -214,9 +261,14 @@ static void __init sp804_of_init(struct device_node *np)
if (WARN_ON(!base))
return;
+ if (of_property_read_bool(np, "hisilicon,timer64")) {
+ timer64_offset = HISI_OFFSET;
+ timer_2_base = TIMER64_2_BASE;
+ }
+
/* Ensure timers are disabled */
sp804_timer_disable(base);
- sp804_timer_disable(base + TIMER_2_BASE);
+ sp804_timer_disable(base + timer_2_base);
if (initialized || !of_device_is_available(np))
goto err;
@@ -242,11 +294,11 @@ static void __init sp804_of_init(struct device_node *np)
of_property_read_u32(np, "arm,sp804-has-irq", &irq_num);
if (irq_num == 2) {
- __sp804_clockevents_init(base + TIMER_2_BASE, irq, clk2, name);
+ __sp804_clockevents_init(base + timer_2_base, irq, clk2, name);
__sp804_clocksource_and_sched_clock_init(base, name, clk1, 1);
} else {
__sp804_clockevents_init(base, irq, clk1 , name);
- __sp804_clocksource_and_sched_clock_init(base + TIMER_2_BASE,
+ __sp804_clocksource_and_sched_clock_init(base + timer_2_base,
name, clk2, 1);
}
initialized = true;
--
1.7.12.4
Powered by blists - more mailing lists