| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <5339448.D8rpq4ofAC@wuerfel>
Date: Mon, 30 May 2016 15:15:25 +0200
From: Arnd Bergmann <arnd@...db.de>
To: linuxppc-dev@...ts.ozlabs.org
Cc: Ulf Hansson <ulf.hansson@...aro.org>,
Yangbo Lu <yangbo.lu@....com>,
Mark Rutland <mark.rutland@....com>,
Xiaobo Xie <xiaobo.xie@....com>,
"linux-i2c@...r.kernel.org" <linux-i2c@...r.kernel.org>,
"linux-clk@...r.kernel.org" <linux-clk@...r.kernel.org>,
Qiang Zhao <qiang.zhao@....com>,
Russell King <linux@....linux.org.uk>,
Bhupesh Sharma <bhupesh.sharma@...escale.com>,
Joerg Roedel <joro@...tes.org>,
Claudiu Manoil <claudiu.manoil@...escale.com>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
Scott Wood <oss@...error.net>,
Rob Herring <robh+dt@...nel.org>,
Santosh Shilimkar <ssantosh@...nel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"netdev@...r.kernel.org" <netdev@...r.kernel.org>,
"linux-mmc@...r.kernel.org" <linux-mmc@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
Yang-Leo Li <leoyang.li@....com>,
"iommu@...ts.linux-foundation.org" <iommu@...ts.linux-foundation.org>,
Kumar Gala <galak@...eaurora.org>
Subject: [PATCH 2/4] soc: fsl: add GUTS driver for QorIQ platforms
From: Yangbo Lu <yangbo.lu@....com>
The global utilities block controls power management, I/O device
enabling, power-onreset(POR) configuration monitoring, alternate
function selection for multiplexed signals,and clock control.
This patch adds GUTS driver to manage and access global utilities
block.
[arnd turned this into a platform_driver registering a soc_device
rather than providing an ad-hoc interface for soc-id]
Signed-off-by: Yangbo Lu <yangbo.lu@....com>
Signed-off-by: Arnd Bergmann <arnd@...db.de>
diff --git a/drivers/soc/Kconfig b/drivers/soc/Kconfig
index cb58ef0d9b2c..7106463f118e 100644
--- a/drivers/soc/Kconfig
+++ b/drivers/soc/Kconfig
@@ -2,7 +2,7 @@ menu "SOC (System On Chip) specific Drivers"
source "drivers/soc/bcm/Kconfig"
source "drivers/soc/brcmstb/Kconfig"
-source "drivers/soc/fsl/qe/Kconfig"
+source "drivers/soc/fsl/Kconfig"
source "drivers/soc/mediatek/Kconfig"
source "drivers/soc/qcom/Kconfig"
source "drivers/soc/rockchip/Kconfig"
diff --git a/drivers/soc/fsl/Kconfig b/drivers/soc/fsl/Kconfig
new file mode 100644
index 000000000000..33d331cac8d6
--- /dev/null
+++ b/drivers/soc/fsl/Kconfig
@@ -0,0 +1,15 @@
+#
+# Freescale SOC drivers
+#
+
+source "drivers/soc/fsl/qe/Kconfig"
+
+config FSL_GUTS
+ bool "NXP Layerscale SoC identification"
+ depends on PPC_FSL || SOC_LS1021A || ARCH_LAYERSCAPE || COMPILE_TEST
+ default PPC_FSL || SOC_LS1021A || ARCH_LAYERSCAPE
+ select SOC_BUS
+ help
+ This registers a SoC device for NXP (formerly Freescale)
+ Layerscape devices, making information about the system
+ available in /sys/devices/soc/
diff --git a/drivers/soc/fsl/Makefile b/drivers/soc/fsl/Makefile
index 203307fd92c1..02afb7f980f6 100644
--- a/drivers/soc/fsl/Makefile
+++ b/drivers/soc/fsl/Makefile
@@ -4,3 +4,4 @@
obj-$(CONFIG_QUICC_ENGINE) += qe/
obj-$(CONFIG_CPM) += qe/
+obj-$(CONFIG_FSL_GUTS) += guts.o
diff --git a/drivers/soc/fsl/guts.c b/drivers/soc/fsl/guts.c
new file mode 100644
index 000000000000..2f30698f5bcf
--- /dev/null
+++ b/drivers/soc/fsl/guts.c
@@ -0,0 +1,130 @@
+/*
+ * Freescale QorIQ Platforms GUTS Driver
+ *
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/sys_soc.h>
+
+#define GUTS_PVR 0x0a0
+#define GUTS_SVR 0x0a4
+
+struct guts {
+ void __iomem *regs;
+ bool little_endian;
+ struct soc_device_attribute soc;
+};
+
+static u32 fsl_guts_get_svr(struct guts *guts)
+{
+ if (guts->little_endian)
+ return ioread32(guts->regs + GUTS_SVR);
+ else
+ return ioread32be(guts->regs + GUTS_SVR);
+}
+
+static u32 fsl_guts_get_pvr(struct guts *guts)
+{
+ if (guts->little_endian)
+ return ioread32(guts->regs + GUTS_PVR);
+ else
+ return ioread32be(guts->regs + GUTS_PVR);
+}
+
+/*
+ * Table for matching compatible strings, for device tree
+ * guts node, for Freescale QorIQ SOCs.
+ */
+static const struct of_device_id fsl_guts_of_match[] = {
+ /* For T4 & B4 Series SOCs */
+ { .compatible = "fsl,qoriq-device-config-1.0", .data = "T4/B4 series" },
+ /* For P Series SOCs */
+ { .compatible = "fsl,p1010-guts", .data = "P1010/P1014" },
+ { .compatible = "fsl,p1020-guts", .data = "P1020/P1011" },
+ { .compatible = "fsl,p1021-guts", .data = "P1021/P1012" },
+ { .compatible = "fsl,p1022-guts", .data = "P1022/P1013" },
+ { .compatible = "fsl,p1023-guts", .data = "P1013/P1017" },
+ { .compatible = "fsl,p2020-guts", .data = "P2010/P2020" },
+ { .compatible = "fsl,qoriq-device-config-2.0", .data = "P series" },
+ /* For BSC Series SOCs */
+ { .compatible = "fsl,bsc9131-guts", .data = "BSC9131 Qonverge" },
+ { .compatible = "fsl,bsc9132-guts", .data = "BSC9132 Qonverge" },
+ /* For MPC85xx Series SOCs */
+ { .compatible = "fsl,mpc8536-guts", .data = "PowerPC MPC8536" },
+ { .compatible = "fsl,mpc8544-guts", .data = "PowerPC MPC8544" },
+ { .compatible = "fsl,mpc8548-guts", .data = "PowerPC MPC8548" },
+ { .compatible = "fsl,mpc8568-guts", .data = "PowerPC MPC8568" },
+ { .compatible = "fsl,mpc8569-guts", .data = "PowerPC MPC8569" },
+ { .compatible = "fsl,mpc8572-guts", .data = "PowerPC MPC8572" },
+ /* For Layerscape Series SOCs */
+ { .compatible = "fsl,ls1021a-dcfg", .data = "Layerscape LS1021A" },
+ { .compatible = "fsl,ls1043a-dcfg", .data = "Layerscape LS1043A" },
+ { .compatible = "fsl,ls2080a-dcfg", .data = "Layerscape LS2080A" },
+ {}
+};
+
+static void fsl_guts_init(struct device *dev, struct guts *guts)
+{
+ const struct of_device_id *id;
+ u32 svr = fsl_guts_get_svr(guts);
+
+ guts->soc.family = "NXP QorIQ";
+ id = of_match_node(fsl_guts_of_match, dev->of_node);
+ guts->soc.soc_id = devm_kasprintf(dev, "%s (ver 0x%06x)" id->data,
+ svr >> 8;
+ guts->soc.revision = devm_kasprintf(dev, GFP_KERNEL, "0x%02x",
+ svr & 0xff);
+}
+
+static int fsl_guts_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct guts *guts;
+ int ret;
+
+ guts = devm_kzalloc(dev, sizeof(*guts), GFP_KERNEL);
+ if (!guts) {
+ ret = -ENOMEM;
+ goto out;
+
+ }
+
+ /*
+ * syscon devices default to little-endian, but on powerpc we have
+ * existing device trees with big-endian maps and an absent endianess
+ * "big-property"
+ */
+ if (!IS_ENABLED(CONFIG_POWERPC) &&
+ !of_property_read_bool(dev->of_node, "big-endian"))
+ guts->little_endian = true;
+
+ guts->regs = devm_ioremap_resource(dev, 0);
+ if (!guts->regs) {
+ ret = -ENOMEM;
+ kfree(guts);
+ goto out;
+ }
+
+ fsl_guts_init(dev, guts);
+ ret = 0;
+out:
+ return ret;
+}
+
+static struct platform_driver fsl_soc_guts = {
+ .probe = fsl_guts_probe,
+ .driver.of_match_table = fsl_guts_of_match,
+};
+
+module_platform_driver(fsl_soc_guts);
Powered by blists - more mailing lists