| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1464659480-2818-1-git-send-email-hpeter+linux_kernel@gmail.com>
Date: Tue, 31 May 2016 09:51:20 +0800
From: "Ji-Ze Hong (Peter Hong)" <hpeter@...il.com>
To: johan@...nel.org, gregkh@...uxfoundation.org
Cc: tom_tsai@...tek.com.tw, peter_hong@...tek.com.tw,
linux-usb@...r.kernel.org, linux-kernel@...r.kernel.org,
"Ji-Ze Hong (Peter Hong)" <hpeter+linux_kernel@...il.com>
Subject: [PATCH V9 1/1] usb:serial: Add Fintek F81532/534 driver
This driver is for Fintek F81532/F81534 USB to Serial Ports IC.
F81532 spec:
https://drive.google.com/file/d/0B8vRwwYO7aMFOTRRMmhWQVNvajQ/view?
usp=sharing
F81534 spec:
https://drive.google.com/file/d/0B8vRwwYO7aMFV29pQWJqbVBNc00/view?
usp=sharing
Features:
1. F81532 is 1-to-2 & F81534 is 1-to-4 serial ports IC
2. Support Baudrate from B50 to B115200.
Signed-off-by: Ji-Ze Hong (Peter Hong) <hpeter+linux_kernel@...il.com>
---
drivers/usb/serial/Kconfig | 10 +
drivers/usb/serial/Makefile | 1 +
drivers/usb/serial/f81534.c | 1528 +++++++++++++++++++++++++++++++++++++++++++
3 files changed, 1539 insertions(+)
create mode 100644 drivers/usb/serial/f81534.c
diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index 56ecb8b..0642864 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -255,6 +255,16 @@ config USB_SERIAL_F81232
To compile this driver as a module, choose M here: the
module will be called f81232.
+config USB_SERIAL_F8153X
+ tristate "USB Fintek F81532/534 Multi-Ports Serial Driver"
+ help
+ Say Y here if you want to use the Fintek F81532/534 Multi-Ports
+ usb to serial adapter.
+
+ To compile this driver as a module, choose M here: the
+ module will be called f81534.
+
+
config USB_SERIAL_GARMIN
tristate "USB Garmin GPS driver"
help
diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile
index 349d9df..9e43b7b 100644
--- a/drivers/usb/serial/Makefile
+++ b/drivers/usb/serial/Makefile
@@ -23,6 +23,7 @@ obj-$(CONFIG_USB_SERIAL_EDGEPORT) += io_edgeport.o
obj-$(CONFIG_USB_SERIAL_EDGEPORT_TI) += io_ti.o
obj-$(CONFIG_USB_SERIAL_EMPEG) += empeg.o
obj-$(CONFIG_USB_SERIAL_F81232) += f81232.o
+obj-$(CONFIG_USB_SERIAL_F8153X) += f81534.o
obj-$(CONFIG_USB_SERIAL_FTDI_SIO) += ftdi_sio.o
obj-$(CONFIG_USB_SERIAL_GARMIN) += garmin_gps.o
obj-$(CONFIG_USB_SERIAL_IPAQ) += ipaq.o
diff --git a/drivers/usb/serial/f81534.c b/drivers/usb/serial/f81534.c
new file mode 100644
index 0000000..c1cb52d
--- /dev/null
+++ b/drivers/usb/serial/f81534.c
@@ -0,0 +1,1528 @@
+/*
+ * F81532/F81534 USB to Serial Ports Bridge
+ *
+ * F81532 => 2 Serial Ports
+ * F81534 => 4 Serial Ports
+ *
+ * Copyright (C) 2016 Tom Tsai (Tom_Tsai@...tek.com.tw)
+ * 2016 Peter Hong (Peter_Hong@...tek.com.tw)
+ *
+ * The F81532/F81534 had 1 control endpoint for setting, 1 endpoint bulk-out
+ * for all serial port TX and 1 endpoint bulk-in for all serial port read in
+ * (Read Data/MSR/LSR).
+ *
+ * Write URB is fixed with 512bytes, per serial port used 128Bytes.
+ * It can be described by f81534_prepare_write_buffer()
+ *
+ * Read URB is 512Bytes max, per serial port used 128Bytes.
+ * It can be described by f81534_process_read_urb() and maybe received with
+ * 128x1,2,3,4 bytes.
+ *
+ */
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+#include <linux/serial_reg.h>
+#include <linux/module.h>
+
+/* Serial Port register Address */
+#define SERIAL_BASE_ADDRESS 0x1200
+#define DIVISOR_LATCH_LSB (0x00 + SERIAL_BASE_ADDRESS)
+#define DIVISOR_LATCH_MSB (0x01 + SERIAL_BASE_ADDRESS)
+#define FIFO_CONTROL_REGISTER (0x02 + SERIAL_BASE_ADDRESS)
+#define LINE_CONTROL_REGISTER (0x03 + SERIAL_BASE_ADDRESS)
+#define MODEM_CONTROL_REGISTER (0x04 + SERIAL_BASE_ADDRESS)
+#define MODEM_STATUS_REGISTER (0x06 + SERIAL_BASE_ADDRESS)
+#define CONFIG1_REGISTER (0x09 + SERIAL_BASE_ADDRESS)
+
+#define F81534_DEF_CONF_ADDRESS_START 0x3000
+#define F81534_DEF_CONF_SIZE 8
+
+#define F81534_CUSTOM_ADDRESS_START 0x2f00
+#define F81534_CUSTOM_DATA_SIZE 0x10
+#define F81534_CUSTOM_NO_CUSTOM_DATA (-1)
+#define F81534_CUSTOM_VALID_TOKEN 0xf0
+#define F81534_CONF_OFFSET 1
+
+#define F81534_MAX_DATA_BLOCK 64
+#define F81534_MAX_BUS_RETRY 2000
+
+/* Default URB timeout for USB operations */
+#define F81534_USB_MAX_RETRY 10
+#define F81534_USB_TIMEOUT 1000
+#define F81534_SET_GET_REGISTER 0xA0
+#define F81534_DELAY_READ_MSR 10
+
+#define F81534_NUM_PORT 4
+#define F81534_UNUSED_PORT 0xff
+#define F81534_WRITE_BUFFER_SIZE 512
+
+#define IC_NAME "f81534"
+#define DRIVER_DESC "Fintek F81532/F81534"
+#define FINTEK_VENDOR_ID_1 0x1934
+#define FINTEK_VENDOR_ID_2 0x2C42
+#define FINTEK_DEVICE_ID 0x1202
+#define F81534_MAX_TX_SIZE 100
+#define F81534_RECEIVE_BLOCK_SIZE 128
+
+#define F81534_TOKEN_RECEIVE 0x01
+#define F81534_TOKEN_WRITE 0x02
+#define F81534_TOKEN_TX_EMPTY 0x03
+#define F81534_TOKEN_MSR_CHANGE 0x04
+
+#define F81534_BUS_BUSY 0x03
+#define F81534_BUS_IDLE 0x04
+#define F81534_BUS_READ_DATA 0x1004
+#define F81534_BUS_REG_STATUS 0x1003
+#define F81534_BUS_REG_START 0x1002
+#define F81534_BUS_REG_END 0x1001
+
+#define F81534_CMD_READ 0x03
+#define F81534_CMD_ENABLE_WR 0x06
+#define F81534_CMD_PROGRAM 0x02
+#define F81534_CMD_ERASE 0x20
+
+#define F81534_DEFAULT_BAUD_RATE 9600
+#define F81534_MAX_BAUDRATE 115200
+
+#define F81534_PORT_CONF_DISABLE_PORT BIT(3)
+#define F81534_PORT_CONF_NOT_EXIST_PORT BIT(7)
+#define F81534_PORT_UNAVAILABLE \
+ (F81534_PORT_CONF_DISABLE_PORT | F81534_PORT_CONF_NOT_EXIST_PORT)
+
+#define F81534_1X_RXTRIGGER 0xc3
+#define F81534_8X_RXTRIGGER 0xcf
+
+/* Default put M0/M1/M2 as 0/0/1 */
+#define F81534_PIN_SET_DEFAULT 0x01
+
+/* Save for a control register and bit offset */
+struct reg_value {
+ const u16 reg_address;
+ const u16 reg_offset;
+};
+
+/*
+ * The following register is for F81532/534 output pin register maps to control
+ * F81532/534 M0_SD/M1/M2 per port and we can reference f81438/439 transceiver
+ * spec to get mode list. If you are not use F81438/439, please review
+ * f81534_switch_gpio_mode() for desire gpio out value.
+ *
+ * For examples, we want to control F81532/534 port 0 M0_SD/M1/M2 to 0/0/1.
+ * We'll do with following instructions.
+ *
+ * 1. set reg 0x2ae8 bit7 to 0 (M0_SD)
+ * 2. set reg 0x2a90 bit5 to 0 (M1)
+ * 3. set reg 0x2a90 bit4 to 1 (M2)
+ *
+ * F81438 Spec:
+ * http://www.alldatasheet.com/datasheet-pdf/pdf/459082/FINTEK/F81438.html
+ */
+static const struct reg_value f81534_pin_control[4][3] = {
+ /* M0_SD M1 M2 */
+ {{0x2ae8, 7}, {0x2a90, 5}, {0x2a90, 4}, }, /* port 0 pins */
+ {{0x2ae8, 6}, {0x2ae8, 0}, {0x2ae8, 3}, }, /* port 1 pins */
+ {{0x2a90, 0}, {0x2ae8, 2}, {0x2a80, 6}, }, /* port 2 pins */
+ {{0x2a90, 3}, {0x2a90, 2}, {0x2a90, 1}, }, /* port 3 pins */
+};
+
+static const struct usb_device_id f81534_id_table[] = {
+ {USB_DEVICE(FINTEK_VENDOR_ID_1, FINTEK_DEVICE_ID)},
+ {USB_DEVICE(FINTEK_VENDOR_ID_2, FINTEK_DEVICE_ID)},
+ {} /* Terminating entry */
+};
+
+struct f81534_serial_private {
+ bool is_phy_port_not_empty[F81534_NUM_PORT];
+ u8 default_conf_data[F81534_DEF_CONF_SIZE];
+ atomic_t port_active[F81534_NUM_PORT];
+ spinlock_t tx_empty_lock;
+ u32 setting_idx;
+};
+
+struct f81534_port_private {
+ struct completion msr_done;
+ struct mutex mcr_mutex;
+ spinlock_t msr_lock;
+ u8 shadow_mcr;
+ u8 shadow_msr;
+ u8 phy;
+};
+
+/*
+ * Get the current logical port index of this device. e.g., If this port is
+ * ttyUSB2 and start port is ttyUSB0, this will return 2.
+ */
+static int f81534_port_index(struct usb_serial_port *port)
+{
+ return port->port_number;
+}
+
+/*
+ * Find logic serial port index with H/W phy index mapping. Due to our device
+ * can be enable/disable port by internal storage to make the port phy no
+ * continuously, we can use this to find phy & logical port mapping.
+ */
+static int f81534_phy_to_logic_port(struct usb_serial *serial, int phy)
+{
+ struct f81534_serial_private *priv = usb_get_serial_data(serial);
+ size_t count = 0, i;
+
+ for (i = 0; i < phy; ++i) {
+ if (priv->default_conf_data[i] & F81534_PORT_UNAVAILABLE)
+ continue;
+
+ ++count;
+ }
+
+ dev_dbg(&serial->dev->dev, "%s: phy: %d count: %zu\n", __func__, phy,
+ count);
+ return count;
+}
+
+static int f81534_set_normal_register(struct usb_device *dev, u16 reg, u8 data)
+{
+ size_t count = F81534_USB_MAX_RETRY;
+ int status;
+ u8 *tmp;
+
+ tmp = kmalloc(sizeof(u8), GFP_KERNEL);
+ if (!tmp)
+ return -ENOMEM;
+
+ *tmp = data;
+
+ /*
+ * Our device maybe not reply when heavily loading, We'll retry for
+ * F81534_USB_MAX_RETRY times.
+ */
+ while (count--) {
+ status = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+ F81534_SET_GET_REGISTER,
+ USB_TYPE_VENDOR | USB_DIR_OUT,
+ reg, 0, tmp, sizeof(u8),
+ F81534_USB_TIMEOUT);
+ if (status > 0)
+ break;
+
+ if (status == 0)
+ status = -EIO;
+ }
+
+ if (status < 0) {
+ dev_err(&dev->dev, "%s: reg: %x data: %x failed: %d\n",
+ __func__, reg, data, status);
+ kfree(tmp);
+ return status;
+ }
+
+ kfree(tmp);
+ return 0;
+}
+
+static int f81534_get_normal_register(struct usb_device *dev, u16 reg,
+ u8 *data)
+{
+ size_t count = F81534_USB_MAX_RETRY;
+ int status;
+ u8 *tmp;
+
+ tmp = kmalloc(sizeof(u8), GFP_KERNEL);
+ if (!tmp)
+ return -ENOMEM;
+
+ /*
+ * Our device maybe not reply when heavily loading, We'll retry for
+ * F81534_USB_MAX_RETRY times.
+ */
+ while (count--) {
+ status = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
+ F81534_SET_GET_REGISTER,
+ USB_TYPE_VENDOR | USB_DIR_IN,
+ reg, 0, tmp, sizeof(u8),
+ F81534_USB_TIMEOUT);
+ if (status > 0)
+ break;
+
+ if (status == 0)
+ status = -EIO;
+ }
+
+ if (status < 0) {
+ dev_err(&dev->dev, "%s: reg: %x failed: %d\n", __func__, reg,
+ status);
+ kfree(tmp);
+ return status;
+ }
+
+ *data = *tmp;
+ kfree(tmp);
+ return 0;
+}
+
+static int f81534_set_mask_normal_register(struct usb_device *dev, u16 reg,
+ u8 mask, u8 data)
+{
+ int status;
+ u8 tmp;
+
+ status = f81534_get_normal_register(dev, reg, &tmp);
+ if (status)
+ return status;
+
+ tmp = (tmp & ~mask) | (mask & data);
+
+ status = f81534_set_normal_register(dev, reg, tmp);
+ if (status)
+ return status;
+
+ return 0;
+}
+
+static int f81534_setregister(struct usb_device *dev, u8 uart, u16 reg,
+ u8 data)
+{
+ return f81534_set_normal_register(dev, reg + uart * 0x10, data);
+}
+
+static int f81534_getregister(struct usb_device *dev, u8 uart, u16 reg,
+ u8 *data)
+{
+ return f81534_get_normal_register(dev, reg + uart * 0x10, data);
+}
+
+static int f81534_command_delay(struct usb_serial *usbserial)
+{
+ struct usb_device *dev = usbserial->dev;
+ size_t count = F81534_MAX_BUS_RETRY;
+ unsigned char tmp;
+ int status;
+
+ do {
+ status = f81534_get_normal_register(dev, F81534_BUS_REG_STATUS,
+ &tmp);
+ if (status)
+ return status;
+
+ if (tmp & F81534_BUS_BUSY)
+ continue;
+
+ if (tmp & F81534_BUS_IDLE)
+ break;
+
+ } while (--count);
+
+ if (!count)
+ return -EIO;
+
+ status = f81534_set_normal_register(dev, F81534_BUS_REG_STATUS,
+ tmp & ~F81534_BUS_IDLE);
+ if (status)
+ return status;
+
+ return 0;
+}
+
+static int f81534_get_normal_register_with_delay(struct usb_serial *usbserial,
+ u16 reg, u8 *data)
+{
+ struct usb_device *dev = usbserial->dev;
+ int status;
+
+ status = f81534_get_normal_register(dev, reg, data);
+ if (status)
+ return status;
+
+ status = f81534_command_delay(usbserial);
+ if (status)
+ return status;
+
+ return 0;
+}
+
+static int f81534_set_normal_register_with_delay(struct usb_serial *usbserial,
+ u16 reg, u8 data)
+{
+ struct usb_device *dev = usbserial->dev;
+ int status;
+
+ status = f81534_set_normal_register(dev, reg, data);
+ if (status)
+ return status;
+
+ status = f81534_command_delay(usbserial);
+ if (status)
+ return status;
+
+ return 0;
+}
+
+static int f81534_read_data(struct usb_serial *usbserial, u32 address,
+ size_t size, unsigned char *buf)
+{
+ u8 tmp_buf[F81534_MAX_DATA_BLOCK];
+ size_t read_size, count, block = 0;
+ int status, offset;
+ u16 reg_tmp;
+
+ status = f81534_set_normal_register_with_delay(usbserial,
+ F81534_BUS_REG_START, F81534_CMD_READ);
+ if (status)
+ return status;
+
+ status = f81534_set_normal_register_with_delay(usbserial,
+ F81534_BUS_REG_START, (address >> 16) & 0xff);
+ if (status)
+ return status;
+
+ status = f81534_set_normal_register_with_delay(usbserial,
+ F81534_BUS_REG_START, (address >> 8) & 0xff);
+ if (status)
+ return status;
+
+ status = f81534_set_normal_register_with_delay(usbserial,
+ F81534_BUS_REG_START, (address >> 0) & 0xff);
+ if (status)
+ return status;
+
+ /* Continuous read mode */
+ do {
+ read_size = min_t(u32, F81534_MAX_DATA_BLOCK, size);
+
+ for (count = 0; count < read_size; ++count) {
+ /* To write F81534_BUS_REG_END when final byte */
+ if (size <= F81534_MAX_DATA_BLOCK && read_size ==
+ count + 1)
+ reg_tmp = F81534_BUS_REG_END;
+ else
+ reg_tmp = F81534_BUS_REG_START;
+
+ /*
+ * Dummy code, force IC to generate a read pulse, the
+ * set of value 0xf1 is dont care (any value is ok)
+ */
+ status = f81534_set_normal_register_with_delay(
+ usbserial, reg_tmp, 0xf1);
+ if (status)
+ return status;
+
+ status = f81534_get_normal_register_with_delay(
+ usbserial,
+ F81534_BUS_READ_DATA,
+ &tmp_buf[count]);
+ if (status)
+ return status;
+
+ offset = count + block * F81534_MAX_DATA_BLOCK;
+ buf[offset] = tmp_buf[count];
+ }
+
+ size -= read_size;
+ ++block;
+ } while (size);
+
+ return 0;
+}
+
+static int f81534_prepare_write_buffer(struct usb_serial_port *port,
+ void *dest, size_t size)
+{
+ struct f81534_port_private *port_priv = usb_get_serial_port_data(port);
+ unsigned char *ptr = (unsigned char *)dest;
+ int port_num = port_priv->phy;
+
+ /*
+ * The block layout is fixed with 4x128 Bytes, per 128 Bytes a port.
+ * index 0: port phy idx (e.g., 0,1,2,3)
+ * index 1: only F81534_TOKEN_WRITE
+ * index 2: serial out size
+ * index 3: fix to 0
+ * index 4~127: serial out data block
+ */
+ ptr[F81534_RECEIVE_BLOCK_SIZE * 0] = 0;
+ ptr[F81534_RECEIVE_BLOCK_SIZE * 1] = 1;
+ ptr[F81534_RECEIVE_BLOCK_SIZE * 2] = 2;
+ ptr[F81534_RECEIVE_BLOCK_SIZE * 3] = 3;
+ ptr[F81534_RECEIVE_BLOCK_SIZE * port_num + 1] = F81534_TOKEN_WRITE;
+ ptr[F81534_RECEIVE_BLOCK_SIZE * port_num + 3] = 0;
+ ptr[F81534_RECEIVE_BLOCK_SIZE * port_num + 2] =
+ kfifo_out_locked(&port->write_fifo,
+ &ptr[F81534_RECEIVE_BLOCK_SIZE * port_num + 4],
+ F81534_MAX_TX_SIZE, &port->lock);
+
+ return F81534_WRITE_BUFFER_SIZE;
+}
+
+static int f81534_submit_writer(struct usb_serial_port *port, gfp_t mem_flags)
+{
+ struct f81534_port_private *port_priv = usb_get_serial_port_data(port);
+ struct f81534_serial_private *serial_priv =
+ usb_get_serial_data(port->serial);
+ struct urb *urb;
+ unsigned long flags;
+ int result;
+
+ /* Check is any data in write_fifo */
+ spin_lock_irqsave(&port->lock, flags);
+
+ if (kfifo_is_empty(&port->write_fifo)) {
+ spin_unlock_irqrestore(&port->lock, flags);
+ return 0;
+ }
+
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ /* Check H/W is TXEMPTY */
+ spin_lock_irqsave(&serial_priv->tx_empty_lock, flags);
+
+ if (serial_priv->is_phy_port_not_empty[port_priv->phy]) {
+ spin_unlock_irqrestore(&serial_priv->tx_empty_lock, flags);
+ return 0;
+ }
+
+ serial_priv->is_phy_port_not_empty[port_priv->phy] = true;
+ spin_unlock_irqrestore(&serial_priv->tx_empty_lock, flags);
+
+ urb = port->write_urbs[0];
+ f81534_prepare_write_buffer(port, port->bulk_out_buffers[0],
+ port->bulk_out_size);
+ urb->transfer_buffer_length = F81534_WRITE_BUFFER_SIZE;
+
+ result = usb_submit_urb(urb, mem_flags);
+ if (result) {
+ dev_err(&port->dev, "%s: submit failed: %d\n", __func__,
+ result);
+ return result;
+ }
+
+ return 0;
+}
+
+static int f81534_switch_gpio_mode(struct usb_serial_port *port, u8 mode)
+{
+ struct f81534_port_private *port_priv = usb_get_serial_port_data(port);
+ struct usb_device *dev = port->serial->dev;
+ const struct reg_value *ptr;
+ int x = port_priv->phy, val, status;
+ size_t y;
+
+ ptr = f81534_pin_control[x];
+ for (y = 0; y < ARRAY_SIZE(f81534_pin_control[x]); ++y) {
+ val = mode & BIT(y) ? BIT(ptr[y].reg_offset) : 0;
+ status = f81534_set_mask_normal_register(dev,
+ ptr[y].reg_address,
+ BIT(ptr[y].reg_offset), val);
+ if (status) {
+ dev_err(&port->dev, "%s: index: %zu failed: %d\n",
+ __func__, y, status);
+ return status;
+ }
+ }
+
+ return 0;
+}
+
+static u32 f81534_calc_baud_divisor(u32 baudrate, u32 clockrate)
+{
+ if (!baudrate)
+ return 0;
+
+ /* Round to nearest divisor */
+ return DIV_ROUND_CLOSEST(clockrate, baudrate);
+}
+
+static int f81534_set_port_config(struct usb_device *dev, u8 port_number,
+ struct usb_serial_port *port,
+ u32 baudrate, u8 lcr)
+{
+ struct f81534_port_private *port_priv = usb_get_serial_port_data(port);
+ struct usb_serial *serial = port->serial;
+ u16 device_port = port_priv->phy;
+ u32 divisor;
+ int status;
+ u8 value;
+
+ if (baudrate <= 1200)
+ value = F81534_1X_RXTRIGGER; /* 128 FIFO & TL: 1x */
+ else
+ value = F81534_8X_RXTRIGGER; /* 128 FIFO & TL: 8x */
+
+ status = f81534_setregister(serial->dev, device_port, CONFIG1_REGISTER,
+ value);
+ if (status) {
+ dev_err(&port->dev, "%s: CONFIG1 setting failed.\n", __func__);
+ return status;
+ }
+
+ if (baudrate <= 1200)
+ value = UART_FCR_TRIGGER_1 | UART_FCR_ENABLE_FIFO; /* TL: 1 */
+ else if (baudrate >= 1152000)
+ value = UART_FCR_R_TRIG_10 | UART_FCR_ENABLE_FIFO; /* TL: 8 */
+ else
+ value = UART_FCR_R_TRIG_11 | UART_FCR_ENABLE_FIFO; /* TL: 14 */
+
+ status = f81534_setregister(serial->dev, device_port,
+ FIFO_CONTROL_REGISTER, value);
+ if (status) {
+ dev_err(&port->dev, "%s: FCR setting failed.\n", __func__);
+ return status;
+ }
+
+ divisor = f81534_calc_baud_divisor(baudrate, F81534_MAX_BAUDRATE);
+ value = UART_LCR_DLAB;
+ status = f81534_setregister(serial->dev, device_port,
+ LINE_CONTROL_REGISTER, value);
+ if (status) {
+ dev_err(&port->dev, "%s: set LCR failed.\n", __func__);
+ return status;
+ }
+
+ value = divisor & 0xff;
+ status = f81534_setregister(serial->dev, device_port,
+ DIVISOR_LATCH_LSB, value);
+ if (status) {
+ dev_err(&port->dev, "%s: set DLAB LSB failed.\n", __func__);
+ return status;
+ }
+
+ value = (divisor >> 8) & 0xff;
+ status = f81534_setregister(serial->dev, device_port,
+ DIVISOR_LATCH_MSB, value);
+ if (status) {
+ dev_err(&port->dev, "%s: set DLAB MSB failed.\n", __func__);
+ return status;
+ }
+
+ status = f81534_setregister(serial->dev, device_port,
+ LINE_CONTROL_REGISTER, lcr);
+ if (status) {
+ dev_err(&port->dev, "%s: set LCR failed.\n", __func__);
+ return status;
+ }
+
+ return 0;
+}
+
+static int f81534_update_mctrl(struct usb_serial_port *port, unsigned int set,
+ unsigned int clear)
+{
+ struct f81534_port_private *port_priv = usb_get_serial_port_data(port);
+ struct usb_device *dev = port->serial->dev;
+ int status;
+ u8 tmp;
+
+ reinit_completion(&port_priv->msr_done);
+ mutex_lock(&port_priv->mcr_mutex);
+
+ if (((set | clear) & (TIOCM_DTR | TIOCM_RTS)) == 0) {
+ dev_dbg(&dev->dev, "%s: DTR|RTS not being set/cleared\n",
+ __func__);
+ mutex_unlock(&port_priv->mcr_mutex);
+ return 0; /* no change */
+ }
+
+ /* 'Set' takes precedence over 'Clear' */
+ clear &= ~set;
+
+ /* Always enable UART_MCR_OUT2 */
+ tmp = UART_MCR_OUT2 | port_priv->shadow_mcr;
+
+ if (clear & TIOCM_DTR)
+ tmp &= ~UART_MCR_DTR;
+
+ if (clear & TIOCM_RTS)
+ tmp &= ~UART_MCR_RTS;
+
+ if (set & TIOCM_DTR)
+ tmp |= UART_MCR_DTR;
+
+ if (set & TIOCM_RTS)
+ tmp |= UART_MCR_RTS;
+
+ status = f81534_setregister(dev, port_priv->phy,
+ MODEM_CONTROL_REGISTER, tmp);
+ if (status < 0) {
+ dev_err(&port->dev, "%s: MCR write failed.\n", __func__);
+ mutex_unlock(&port_priv->mcr_mutex);
+ return status;
+ }
+
+ port_priv->shadow_mcr = tmp;
+ mutex_unlock(&port_priv->mcr_mutex);
+ return 0;
+}
+
+/*
+ * This function will search the data area with token F81534_CUSTOM_VALID_TOKEN
+ * for latest configuration index. If nothing found (*index = -1), the caller
+ * will load default configure in F81534_DEF_CONF_ADDRESS_START section.
+ *
+ * Due to we only use block0 to save data, so *index should be 0 or
+ * F81534_CUSTOM_NO_CUSTOM_DATA(-1).
+ */
+static int f81534_find_config_idx(struct usb_serial *serial, uintptr_t *index)
+{
+ u8 custom_data;
+ int status;
+
+ status = f81534_read_data(serial, F81534_CUSTOM_ADDRESS_START, 1,
+ &custom_data);
+ if (status) {
+ dev_err(&serial->dev->dev, "%s: read failed: %d\n", __func__,
+ status);
+ return status;
+ }
+
+ /*
+ * If had custom setting, override. The 1st byte is a
+ * indicator. 0xff is empty, F81534_CUSTOM_VALID_TOKEN is had
+ * data. read and skip with 1st data.
+ */
+ if (custom_data == F81534_CUSTOM_VALID_TOKEN)
+ *index = 0;
+ else
+ *index = F81534_CUSTOM_NO_CUSTOM_DATA;
+
+ return 0;
+}
+
+/*
+ * We had 2 generation of F81532/534 IC. All has an internal storage.
+ *
+ * 1st is pure USB-to-TTL RS232 IC and designed for 4 ports only, no any
+ * internal data will used. All mode and gpio control should manually set
+ * by AP or Driver and all storage space value are 0xff. The
+ * f81534_calc_num_ports() will run to final we marked as "oldest version"
+ * for this IC.
+ *
+ * 2rd is designed to more generic to use any transceiver and this is our
+ * mass production type. We'll save data in F81534_CUSTOM_ADDRESS_START
+ * (0x2f00) with 9bytes. The 1st byte is a indicater. If the token is not
+ * F81534_CUSTOM_VALID_TOKEN(0xf0), the IC is 2nd gen type, the following
+ * 4bytes save port mode (0:RS232/1:RS485 Invert/2:RS485), and the last
+ * 4bytes save GPIO state(value from 0~7 to represent 3 GPIO output pin).
+ * The f81534_calc_num_ports() will run to "new style" with checking
+ * F81534_PORT_UNAVAILABLE section.
+ */
+static int f81534_calc_num_ports(struct usb_serial *serial)
+{
+ unsigned char setting[F81534_CUSTOM_DATA_SIZE];
+ uintptr_t setting_idx;
+ u8 num_port = 0;
+ int status;
+ size_t i;
+
+ /* Check had custom setting */
+ status = f81534_find_config_idx(serial, &setting_idx);
+ if (status) {
+ dev_err(&serial->dev->dev, "%s: find idx failed: %d\n",
+ __func__, status);
+ return 0;
+ }
+
+ /* Save the configuration area idx as private data for attach() */
+ usb_set_serial_data(serial, (void *)setting_idx);
+
+ /* Read default board setting */
+ status = f81534_read_data(serial, F81534_DEF_CONF_ADDRESS_START,
+ F81534_NUM_PORT, setting);
+ if (status) {
+ dev_err(&serial->dev->dev, "%s: read failed: %d\n", __func__,
+ status);
+ return 0;
+ }
+
+ /*
+ * If had custom setting, override it. 1st byte is a indicator, 0xff
+ * is empty, F81534_CUSTOM_VALID_TOKEN is had data, then skip with 1st
+ * data
+ */
+ if (setting_idx != F81534_CUSTOM_NO_CUSTOM_DATA) {
+ status = f81534_read_data(serial, F81534_CUSTOM_ADDRESS_START +
+ F81534_CONF_OFFSET,
+ sizeof(setting), setting);
+ if (status) {
+ dev_err(&serial->dev->dev,
+ "%s: get custom data failed: %d\n",
+ __func__, status);
+ return 0;
+ }
+
+ dev_dbg(&serial->dev->dev,
+ "%s: read configure from block: %d\n",
+ __func__, (unsigned int)setting_idx);
+ } else {
+ dev_dbg(&serial->dev->dev, "%s: read configure default\n",
+ __func__);
+ }
+
+ /* New style, find all possible ports */
+ num_port = 0;
+ for (i = 0; i < F81534_NUM_PORT; ++i) {
+ if (setting[i] & F81534_PORT_UNAVAILABLE)
+ continue;
+
+ ++num_port;
+ }
+
+ if (num_port)
+ return num_port;
+
+ dev_warn(&serial->dev->dev, "Read Failed. default 4 ports\n");
+ return 4; /* Nothing found, oldest version IC */
+}
+
+static void f81534_set_termios(struct tty_struct *tty,
+ struct usb_serial_port *port,
+ struct ktermios *old_termios)
+{
+ struct f81534_port_private *port_priv = usb_get_serial_port_data(port);
+ struct usb_device *dev = port->serial->dev;
+ u8 new_lcr = 0;
+ int status;
+ u32 baud;
+
+ if (C_BAUD(tty) == B0)
+ f81534_update_mctrl(port, 0, TIOCM_DTR | TIOCM_RTS);
+ else if (old_termios && (old_termios->c_cflag & CBAUD) == B0)
+ f81534_update_mctrl(port, TIOCM_DTR | TIOCM_RTS, 0);
+
+ if (C_PARENB(tty)) {
+ new_lcr |= UART_LCR_PARITY;
+
+ if (!C_PARODD(tty))
+ new_lcr |= UART_LCR_EPAR;
+
+ if (C_CMSPAR(tty))
+ new_lcr |= UART_LCR_SPAR;
+ }
+
+ if (C_CSTOPB(tty))
+ new_lcr |= UART_LCR_STOP;
+
+ switch (C_CSIZE(tty)) {
+ case CS5:
+ new_lcr |= UART_LCR_WLEN5;
+ break;
+ case CS6:
+ new_lcr |= UART_LCR_WLEN6;
+ break;
+ case CS7:
+ new_lcr |= UART_LCR_WLEN7;
+ break;
+ default:
+ case CS8:
+ new_lcr |= UART_LCR_WLEN8;
+ break;
+ }
+
+ baud = tty_get_baud_rate(tty);
+ if (!baud)
+ return;
+
+ if (baud > F81534_MAX_BAUDRATE) {
+ if (old_termios)
+ baud = old_termios->c_ospeed;
+ else
+ baud = F81534_DEFAULT_BAUD_RATE;
+ }
+
+ dev_dbg(&dev->dev, "%s: baud: %d\n", __func__, baud);
+ tty_encode_baud_rate(tty, baud, baud);
+
+ status = f81534_set_port_config(dev, port_priv->phy, port, baud,
+ new_lcr);
+ if (status < 0) {
+ dev_err(&port->dev, "%s: set port config failed: %d\n",
+ __func__, status);
+ }
+}
+
+static int f81534_submit_read_urb(struct usb_serial *serial, gfp_t flags)
+{
+ int status;
+
+ status = usb_serial_generic_submit_read_urbs(serial->port[0], flags);
+ if (status) {
+ dev_err(&serial->dev->dev, "%s: submit read URB failed: %d\n",
+ __func__, status);
+ return status;
+ }
+
+ return 0;
+}
+
+static void f81534_msr_changed(struct usb_serial_port *port, u8 msr,
+ bool is_port_open)
+{
+ struct f81534_port_private *port_priv = usb_get_serial_port_data(port);
+ struct tty_struct *tty;
+ unsigned long flags;
+ u8 old_msr;
+
+ if (!(msr & UART_MSR_ANY_DELTA))
+ return;
+
+ spin_lock_irqsave(&port_priv->msr_lock, flags);
+ old_msr = port_priv->shadow_msr;
+ port_priv->shadow_msr = msr;
+ spin_unlock_irqrestore(&port_priv->msr_lock, flags);
+
+ dev_dbg(&port->dev, "%s: MSR from %02x to %02x\n", __func__, old_msr,
+ msr);
+
+ if (!is_port_open)
+ return;
+
+ /* Update input line counters */
+ if (msr & UART_MSR_DCTS)
+ port->icount.cts++;
+ if (msr & UART_MSR_DDSR)
+ port->icount.dsr++;
+ if (msr & UART_MSR_DDCD)
+ port->icount.dcd++;
+ if (msr & UART_MSR_TERI)
+ port->icount.rng++;
+
+ wake_up_interruptible(&port->port.delta_msr_wait);
+ complete(&port_priv->msr_done);
+
+ if (!(msr & UART_MSR_DDCD))
+ return;
+
+ dev_dbg(&port->dev, "%s: DCD Changed: port %d from %x to %x.\n",
+ __func__, port_priv->phy, old_msr, msr);
+
+ tty = tty_port_tty_get(&port->port);
+ if (!tty)
+ return;
+
+ usb_serial_handle_dcd_change(port, tty, msr & UART_MSR_DCD);
+ tty_kref_put(tty);
+}
+
+static int f81534_read_msr(struct usb_serial_port *port)
+{
+ struct f81534_port_private *port_priv = usb_get_serial_port_data(port);
+ struct usb_serial *serial = port->serial;
+ int phy = port_priv->phy, status;
+ unsigned long flags;
+ u8 msr;
+
+ /* Get MSR initial value*/
+ status = f81534_getregister(serial->dev, phy, MODEM_STATUS_REGISTER,
+ &msr);
+ if (status)
+ return status;
+
+ /* Force update current state */
+ spin_lock_irqsave(&port_priv->msr_lock, flags);
+ port_priv->shadow_msr = msr;
+ spin_unlock_irqrestore(&port_priv->msr_lock, flags);
+
+ f81534_msr_changed(port, msr, true);
+ return 0;
+}
+
+static int f81534_open(struct tty_struct *tty, struct usb_serial_port *port)
+{
+ struct f81534_port_private *port_priv = usb_get_serial_port_data(port);
+ struct f81534_serial_private *serial_priv =
+ usb_get_serial_data(port->serial);
+ int status, phy = port_priv->phy;
+
+ status = f81534_setregister(port->serial->dev, phy,
+ FIFO_CONTROL_REGISTER, UART_FCR_ENABLE_FIFO |
+ UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
+ if (status) {
+ dev_err(&port->dev, "%s: Clear FIFO failed: %d\n", __func__,
+ status);
+ return status;
+ }
+
+ if (tty)
+ f81534_set_termios(tty, port, &tty->termios);
+
+ status = f81534_read_msr(port);
+ if (status)
+ return status;
+
+ atomic_inc(&serial_priv->port_active[phy]);
+ return 0;
+}
+
+static void f81534_close(struct usb_serial_port *port)
+{
+ struct f81534_port_private *port_priv = usb_get_serial_port_data(port);
+ struct f81534_serial_private *serial_priv =
+ usb_get_serial_data(port->serial);
+ int phy = port_priv->phy;
+ unsigned long flags;
+ size_t i;
+
+ atomic_dec(&serial_priv->port_active[phy]);
+
+ /* Referenced from usb_serial_generic_close() */
+ for (i = 0; i < ARRAY_SIZE(port->write_urbs); ++i)
+ usb_kill_urb(port->write_urbs[i]);
+
+ spin_lock_irqsave(&port->lock, flags);
+ kfifo_reset_out(&port->write_fifo);
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static int f81534_get_serial_info(struct usb_serial_port *port,
+ struct serial_struct __user *retinfo)
+{
+ struct f81534_port_private *port_priv;
+ struct serial_struct tmp;
+
+ port_priv = usb_get_serial_port_data(port);
+ if (!port_priv)
+ return -EFAULT;
+
+ if (!retinfo)
+ return -EFAULT;
+
+ memset(&tmp, 0, sizeof(tmp));
+
+ tmp.type = PORT_16550A;
+ tmp.port = port->port_number;
+ tmp.line = port->minor;
+ tmp.baud_base = F81534_MAX_BAUDRATE;
+
+ if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
+ return -EFAULT;
+
+ return 0;
+}
+
+static int f81534_ioctl(struct tty_struct *tty, unsigned int cmd,
+ unsigned long arg)
+{
+ struct usb_serial_port *port = tty->driver_data;
+
+ switch (cmd) {
+ case TIOCGSERIAL:
+ return f81534_get_serial_info(port,
+ (struct serial_struct __user *)
+ arg);
+ default:
+ break;
+ }
+
+ return -ENOIOCTLCMD;
+}
+
+static void f81534_process_per_serial_block(struct usb_serial_port *port,
+ unsigned char *data)
+{
+ struct f81534_serial_private *priv = usb_get_serial_data(port->serial);
+ int phy_port_num = data[0];
+ size_t i, read_size = 0;
+ unsigned long flags;
+ bool available;
+ char tty_flag;
+ int status;
+ u8 lsr;
+
+ available = !!atomic_read(&priv->port_active[phy_port_num]);
+
+ /*
+ * The block layout is 128 Bytes
+ * index 0: port phy idx (e.g., 0,1,2,3),
+ * index 1: It's could be
+ * F81534_TOKEN_RECEIVE
+ * F81534_TOKEN_TX_EMPTY
+ * F81534_TOKEN_MSR_CHANGE
+ * index 2: serial in size (data+lsr, must be even)
+ * meaningful for F81534_TOKEN_RECEIVE only
+ * index 3: current MSR with this device
+ * index 4~127: serial in data block (data+lsr, must be even)
+ */
+ switch (data[1]) {
+ case F81534_TOKEN_TX_EMPTY:
+ /*
+ * We should save TX_EMPTY flag even the port is not opened
+ */
+ spin_lock_irqsave(&priv->tx_empty_lock, flags);
+ priv->is_phy_port_not_empty[phy_port_num] = false;
+ spin_unlock_irqrestore(&priv->tx_empty_lock, flags);
+ usb_serial_port_softint(port);
+
+ if (!available)
+ return;
+
+ /* Try to submit writer only when port is opened */
+ status = f81534_submit_writer(port, GFP_ATOMIC);
+ if (status)
+ dev_err(&port->dev, "%s: submit failed\n", __func__);
+ return;
+
+ case F81534_TOKEN_MSR_CHANGE:
+ /*
+ * We'll save MSR value when device reported even when port
+ * is not opened. If the port is not opened, the MSR will only
+ * recorded without any future process.
+ */
+ f81534_msr_changed(port, data[3], available);
+ return;
+
+ case F81534_TOKEN_RECEIVE:
+ if (!available)
+ return;
+
+ read_size = data[2];
+ break;
+
+ default:
+ dev_warn(&port->dev, "%s: unknown token:%02x\n", __func__,
+ data[1]);
+ return;
+ }
+
+ for (i = 4; i < 4 + read_size; i += 2) {
+ tty_flag = TTY_NORMAL;
+ lsr = data[i + 1];
+
+ if (lsr & UART_LSR_BRK_ERROR_BITS) {
+ if (lsr & UART_LSR_BI) {
+ tty_flag = TTY_BREAK;
+ port->icount.brk++;
+ usb_serial_handle_break(port);
+ } else if (lsr & UART_LSR_PE) {
+ tty_flag = TTY_PARITY;
+ port->icount.parity++;
+ } else if (lsr & UART_LSR_FE) {
+ tty_flag = TTY_FRAME;
+ port->icount.frame++;
+ }
+
+ if (lsr & UART_LSR_OE) {
+ port->icount.overrun++;
+ tty_insert_flip_char(&port->port, 0,
+ TTY_OVERRUN);
+ }
+ }
+
+ if (port->port.console && port->sysrq) {
+ if (usb_serial_handle_sysrq_char(port, data[i]))
+ continue;
+ }
+
+ tty_insert_flip_char(&port->port, data[i], tty_flag);
+ }
+
+ tty_flip_buffer_push(&port->port);
+}
+
+static void f81534_process_read_urb(struct urb *urb)
+{
+ struct f81534_port_private *port_priv;
+ struct usb_serial_port *port;
+ struct usb_serial *serial;
+ unsigned char *ch;
+ int phy_port_num;
+ int tty_port_num;
+ size_t i;
+
+ if (!urb->actual_length)
+ return;
+
+ port = urb->context;
+ serial = port->serial;
+ ch = urb->transfer_buffer;
+
+ for (i = 0; i < urb->actual_length; i += F81534_RECEIVE_BLOCK_SIZE) {
+ phy_port_num = ch[i];
+ tty_port_num = f81534_phy_to_logic_port(serial, phy_port_num);
+ port = serial->port[tty_port_num];
+
+ /*
+ * The device will send back all information when we submitted
+ * a read URB (MSR/DATA/TX_EMPTY). But it maybe get callback
+ * before port_probe() or after port_remove().
+ *
+ * So we'll verify the pointer. If the pointer is NULL, it's
+ * mean the port not init complete and the block will skip.
+ */
+ port_priv = usb_get_serial_port_data(port);
+ if (!port_priv) {
+ dev_warn(&serial->dev->dev,
+ "%s: phy: %d not ready\n", __func__,
+ phy_port_num);
+ continue;
+ }
+
+ f81534_process_per_serial_block(port, &ch[i]);
+ }
+}
+
+static void f81534_write_usb_callback(struct urb *urb)
+{
+ struct usb_serial_port *port = urb->context;
+
+ switch (urb->status) {
+ case 0:
+ break;
+ case -ENOENT:
+ case -ECONNRESET:
+ case -ESHUTDOWN:
+ dev_dbg(&port->dev, "%s - urb stopped: %d\n",
+ __func__, urb->status);
+ return;
+ case -EPIPE:
+ dev_err(&port->dev, "%s - urb stopped: %d\n",
+ __func__, urb->status);
+ return;
+ default:
+ dev_dbg(&port->dev, "%s - nonzero urb status: %d\n",
+ __func__, urb->status);
+ break;
+ }
+
+ usb_serial_port_softint(port);
+}
+
+static int f81534_setup_ports(struct usb_serial *serial)
+{
+ struct usb_serial_port *port;
+ u8 port0_out_address;
+ int buffer_size;
+ size_t i, j;
+
+ /*
+ * In our system architecture, we had 2 or 4 serial ports,
+ * but only get 1 set of bulk in/out endpoints.
+ *
+ * The usb-serial subsystem will generate port 0 data,
+ * but port 1/2/3 will not. It's will generate write URB and buffer
+ * by following code and use the port0 read URB for read operation.
+ */
+ for (i = 1; i < serial->num_ports; ++i) {
+ port0_out_address = serial->port[0]->bulk_out_endpointAddress;
+ buffer_size = serial->port[0]->bulk_out_size;
+ port = serial->port[i];
+
+ if (kfifo_alloc(&port->write_fifo, PAGE_SIZE, GFP_KERNEL))
+ goto failed;
+
+ port->bulk_out_size = buffer_size;
+ port->bulk_out_endpointAddress = port0_out_address;
+
+ for (j = 0; j < ARRAY_SIZE(port->write_urbs); ++j) {
+ set_bit(j, &port->write_urbs_free);
+
+ port->write_urbs[j] = usb_alloc_urb(0, GFP_KERNEL);
+ if (!port->write_urbs[j])
+ goto failed;
+
+ port->bulk_out_buffers[j] = kzalloc(buffer_size,
+ GFP_KERNEL);
+ if (!port->bulk_out_buffers[j])
+ goto failed;
+
+ usb_fill_bulk_urb(port->write_urbs[j], serial->dev,
+ usb_sndbulkpipe(serial->dev,
+ port0_out_address),
+ port->bulk_out_buffers[j], buffer_size,
+ serial->type->write_bulk_callback,
+ port);
+ }
+
+ port->write_urb = port->write_urbs[0];
+ port->bulk_out_buffer = port->bulk_out_buffers[0];
+ }
+
+ return 0;
+failed:
+ return -ENOMEM;
+}
+
+static int f81534_load_configure_data(struct usb_serial_port *port)
+{
+ int status;
+
+ /* Force GPIO to 0/0/1 currently */
+ status = f81534_switch_gpio_mode(port, F81534_PIN_SET_DEFAULT);
+ if (status) {
+ dev_err(&port->dev,
+ "%s: switch gpio mode failed: %d\n", __func__,
+ status);
+ return status;
+ }
+
+ return 0;
+}
+
+static int f81534_attach(struct usb_serial *serial)
+{
+ uintptr_t setting_idx = (uintptr_t)usb_get_serial_data(serial);
+ struct f81534_serial_private *serial_priv;
+ int status;
+ size_t i;
+
+ serial_priv = devm_kzalloc(&serial->dev->dev, sizeof(*serial_priv),
+ GFP_KERNEL);
+ if (!serial_priv)
+ return -ENOMEM;
+
+ usb_set_serial_data(serial, serial_priv);
+ serial_priv->setting_idx = setting_idx;
+
+ for (i = 0; i < F81534_NUM_PORT; ++i)
+ atomic_set(&serial_priv->port_active[i], 0);
+
+ spin_lock_init(&serial_priv->tx_empty_lock);
+
+ status = f81534_setup_ports(serial);
+ if (status)
+ return status;
+
+ /*
+ * The default configuration layout:
+ * byte 0/1/2/3: uart setting
+ *
+ * We can reference from f81534_load_configure_data().
+ */
+ status = f81534_read_data(serial, F81534_DEF_CONF_ADDRESS_START,
+ F81534_DEF_CONF_SIZE,
+ serial_priv->default_conf_data);
+ if (status) {
+ dev_err(&serial->dev->dev, "%s: read reserve data failed\n",
+ __func__);
+ return status;
+ }
+
+ /*
+ * If serial_priv->setting_idx == F81534_CUSTOM_NO_CUSTOM_DATA
+ * it's mean for no configuration in custom section, so we'll use
+ * default config read from F81534_DEF_CONF_ADDRESS_START
+ */
+ if (serial_priv->setting_idx == F81534_CUSTOM_NO_CUSTOM_DATA)
+ return 0;
+
+ /* Only read 8 bytes for mode & GPIO */
+ status = f81534_read_data(serial, F81534_CUSTOM_ADDRESS_START +
+ F81534_CONF_OFFSET,
+ sizeof(serial_priv->default_conf_data),
+ serial_priv->default_conf_data);
+ if (status) {
+ dev_err(&serial->dev->dev,
+ "%s: idx: %d get data failed: %d\n", __func__,
+ serial_priv->setting_idx, status);
+ return status;
+ }
+
+ /*
+ * We'll register port 0 bulkin only once, It'll take all port received
+ * data, MSR register change and TX_EMPTY information.
+ */
+ status = f81534_submit_read_urb(serial, GFP_KERNEL);
+ if (status)
+ return status;
+
+ return 0;
+}
+
+static int f81534_port_probe(struct usb_serial_port *port)
+{
+ struct f81534_serial_private *serial_priv =
+ usb_get_serial_data(port->serial);
+ struct f81534_port_private *port_priv;
+ int port_index = f81534_port_index(port);
+ size_t i, count = 0;
+
+ port_priv = devm_kzalloc(&port->dev, sizeof(*port_priv), GFP_KERNEL);
+ if (!port_priv)
+ return -ENOMEM;
+
+ init_completion(&port_priv->msr_done);
+ spin_lock_init(&port_priv->msr_lock);
+ mutex_init(&port_priv->mcr_mutex);
+
+ /* Assign logic-to-phy mapping */
+ port_priv->phy = F81534_UNUSED_PORT;
+
+ for (i = 0; i < F81534_NUM_PORT; ++i) {
+ if (serial_priv->default_conf_data[i] &
+ F81534_PORT_UNAVAILABLE)
+ continue;
+
+ if (port_index == count) {
+ port_priv->phy = i;
+ break;
+ }
+
+ ++count;
+ }
+
+ if (port_priv->phy == F81534_UNUSED_PORT)
+ return -ENODEV;
+
+ usb_set_serial_port_data(port, port_priv);
+ dev_dbg(&port->dev, "%s: mapping to phy: %d\n", __func__,
+ port_priv->phy);
+
+ return f81534_load_configure_data(port);
+}
+
+static int f81534_port_remove(struct usb_serial_port *port)
+{
+ size_t i;
+
+ /*
+ * We had only submit port0 read URB for use, but we'll kill all port
+ * read URBs for code consistency
+ */
+ for (i = 0; i < ARRAY_SIZE(port->read_urbs); ++i)
+ usb_kill_urb(port->read_urbs[i]);
+
+ return 0;
+}
+
+static int f81534_tiocmget(struct tty_struct *tty)
+{
+ struct usb_serial_port *port = tty->driver_data;
+ struct f81534_port_private *port_priv = usb_get_serial_port_data(port);
+ unsigned long flags;
+ int r;
+ u8 msr, mcr;
+
+ /*
+ * We'll avoid to direct read MSR register without open(). The IC will
+ * read the MSR changed and report it f81534_process_per_serial_block()
+ * by F81534_TOKEN_MSR_CHANGE.
+ *
+ * When this device in heavy loading (e.g., BurnInTest Loopback Test)
+ * The report of MSR register will delay received a bit. It's due to
+ * MSR interrupt is lowest priority in 16550A. So we decide to sleep
+ * a little time to pass the test.
+ */
+ r = wait_for_completion_killable_timeout(&port_priv->msr_done,
+ msecs_to_jiffies(F81534_DELAY_READ_MSR));
+ if (r < 0)
+ return -EINTR;
+
+ mutex_lock(&port_priv->mcr_mutex);
+ spin_lock_irqsave(&port_priv->msr_lock, flags);
+
+ msr = port_priv->shadow_msr;
+ mcr = port_priv->shadow_mcr;
+
+ spin_unlock_irqrestore(&port_priv->msr_lock, flags);
+ mutex_unlock(&port_priv->mcr_mutex);
+
+ r = (mcr & UART_MCR_DTR ? TIOCM_DTR : 0) |
+ (mcr & UART_MCR_RTS ? TIOCM_RTS : 0) |
+ (msr & UART_MSR_CTS ? TIOCM_CTS : 0) |
+ (msr & UART_MSR_DCD ? TIOCM_CAR : 0) |
+ (msr & UART_MSR_RI ? TIOCM_RI : 0) |
+ (msr & UART_MSR_DSR ? TIOCM_DSR : 0);
+
+ return r;
+}
+
+static int f81534_tiocmset(struct tty_struct *tty,
+ unsigned int set, unsigned int clear)
+{
+ struct usb_serial_port *port = tty->driver_data;
+
+ return f81534_update_mctrl(port, set, clear);
+}
+
+static void f81534_dtr_rts(struct usb_serial_port *port, int on)
+{
+ if (on)
+ f81534_update_mctrl(port, TIOCM_DTR | TIOCM_RTS, 0);
+ else
+ f81534_update_mctrl(port, 0, TIOCM_DTR | TIOCM_RTS);
+}
+
+static int f81534_write(struct tty_struct *tty,
+ struct usb_serial_port *port,
+ const unsigned char *buf, int count)
+{
+ int bytes_out, status;
+
+ if (!count)
+ return 0;
+
+ bytes_out = kfifo_in_locked(&port->write_fifo, buf, count,
+ &port->lock);
+
+ status = f81534_submit_writer(port, GFP_ATOMIC);
+ if (status) {
+ dev_err(&port->dev, "%s: submit failed\n", __func__);
+ return status;
+ }
+
+ return bytes_out;
+}
+
+static int f81534_resume(struct usb_serial *serial)
+{
+ struct usb_serial_port *port;
+ int status, error = 0;
+ size_t i;
+
+ /*
+ * We'll register port 0 bulkin only once, It'll take all port received
+ * data, MSR register change and TX_EMPTY information.
+ */
+ status = f81534_submit_read_urb(serial, GFP_NOIO);
+ if (status)
+ return status;
+
+ for (i = 0; i < serial->num_ports; i++) {
+ port = serial->port[i];
+ if (!test_bit(ASYNCB_INITIALIZED, &port->port.flags))
+ continue;
+
+ status = f81534_submit_writer(port, GFP_NOIO);
+ if (status) {
+ dev_err(&port->dev, "%s: submit failed\n", __func__);
+ ++error;
+ }
+ }
+
+ return error ? -EIO : 0;
+}
+
+static struct usb_serial_driver f81534_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = IC_NAME,
+ },
+ .description = DRIVER_DESC,
+ .id_table = f81534_id_table,
+ .open = f81534_open,
+ .close = f81534_close,
+ .write = f81534_write,
+ .calc_num_ports = f81534_calc_num_ports,
+ .attach = f81534_attach,
+ .port_probe = f81534_port_probe,
+ .port_remove = f81534_port_remove,
+ .dtr_rts = f81534_dtr_rts,
+ .process_read_urb = f81534_process_read_urb,
+ .ioctl = f81534_ioctl,
+ .tiocmget = f81534_tiocmget,
+ .tiocmset = f81534_tiocmset,
+ .write_bulk_callback = f81534_write_usb_callback,
+ .set_termios = f81534_set_termios,
+ .resume = f81534_resume,
+};
+
+static struct usb_serial_driver *const serial_drivers[] = {
+ &f81534_device, NULL
+};
+
+module_usb_serial_driver(serial_drivers, f81534_id_table);
+
+MODULE_DEVICE_TABLE(usb, f81534_id_table);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("Peter Hong <Peter_Hong@...tek.com.tw>");
+MODULE_AUTHOR("Tom Tsai <Tom_Tsai@...tek.com.tw>");
+MODULE_LICENSE("GPL");
--
1.9.1
Powered by blists - more mailing lists