[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAKfKVtF1hOn9QwiqtjqqPYtUz5PscTBs4kBC1zRH6FY-4vVoUA@mail.gmail.com>
Date: Tue, 31 May 2016 07:59:01 +0530
From: Shubhrajyoti Datta <shubhrajyoti.datta@...il.com>
To: Nava kishore Manne <nava.manne@...inx.com>
Cc: Rob Herring <robh+dt@...nel.org>, Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>,
Michal Simek <michal.simek@...inx.com>,
Sören Brinkmann <soren.brinkmann@...inx.com>,
balbi@...com, gregkh@...uxfoundation.org, hyun.kwon@...inx.com,
navam@...inx.com, radhey.shyam.pandey@...inx.com,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH v4] Axi-usb: Add support for 64-bit addressing.
On Mon, May 30, 2016 at 10:16 PM, Nava kishore Manne
<nava.manne@...inx.com> wrote:
> This patch updates the driver to support 64-bit DMA addressing.
>
> Signed-off-by: Nava kishore Manne <navam@...inx.com>
> ---
> Changes for v4:
> -Used boolen property insted of addrwith property in the DT
> as suggested by Arnd Bergmann.
> -Adopt the DT relevant changes into the driver.
>
> Changes for v3:
> -Added new compatable string for 5.00 IP version as suggested by
> Arnd Bergmann.
> -Used write_fn() insted of lo_hi_writeq() as suggested by
> Arnd Bergmann.
>
> Changes for v2:
> -Added dma-ranges property in device tree as suggested by Arnd Bergmann.
> -Modified the driver code based on the xlnx,addrwidth.
>
> .../devicetree/bindings/usb/udc-xilinx.txt | 5 ++-
> drivers/usb/gadget/udc/udc-xilinx.c | 52 +++++++++++++++++++++-
> 2 files changed, 54 insertions(+), 3 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/usb/udc-xilinx.txt b/Documentation/devicetree/bindings/usb/udc-xilinx.txt
> index 47b4e39..d08d972 100644
> --- a/Documentation/devicetree/bindings/usb/udc-xilinx.txt
> +++ b/Documentation/devicetree/bindings/usb/udc-xilinx.txt
> @@ -1,12 +1,14 @@
> Xilinx USB2 device controller
>
> Required properties:
> -- compatible : Should be "xlnx,usb2-device-4.00.a"
> +- compatible : Should be "xlnx,usb2-device-4.00.a" or
> + "xlnx,usb2-device-5.00"
> - reg : Physical base address and size of the USB2
> device registers map.
> - interrupts : Should contain single irq line of USB2 device
> controller
> - xlnx,has-builtin-dma : if DMA is included
> +- xlnx,has-64bit-dma : if DMA is included 64-bit addressing support.
>
> Example:
> axi-usb2-device@...00000 {
> @@ -14,5 +16,6 @@ Example:
> interrupts = <0x0 0x39 0x1>;
> reg = <0x42e00000 0x10000>;
> xlnx,has-builtin-dma;
> + xlnx,has-64bit-dma;
> };
>
> diff --git a/drivers/usb/gadget/udc/udc-xilinx.c b/drivers/usb/gadget/udc/udc-xilinx.c
> index 1cbb0ac..6fb80c6 100644
> --- a/drivers/usb/gadget/udc/udc-xilinx.c
> +++ b/drivers/usb/gadget/udc/udc-xilinx.c
> @@ -47,6 +47,15 @@
> #define XUSB_DMA_LENGTH_OFFSET 0x0210 /* DMA Length Register */
> #define XUSB_DMA_STATUS_OFFSET 0x0214 /* DMA Status Register */
>
> +/* DMA source Address Reg for LSB */
> +#define XUSB_DMA_DSAR_ADDR_OFFSET_LSB 0x0308
> +/* DMA source Address Reg for MSB */
> +#define XUSB_DMA_DSAR_ADDR_OFFSET_MSB 0x030C
> +/* DMA destination Addr Reg LSB */
> +#define XUSB_DMA_DDAR_ADDR_OFFSET_LSB 0x0310
> +/* DMA destination Addr Reg MSB */
> +#define XUSB_DMA_DDAR_ADDR_OFFSET_MSB 0x0314
> +
> /* Endpoint Configuration Space offsets */
> #define XUSB_EP_CFGSTATUS_OFFSET 0x00 /* Endpoint Config Status */
> #define XUSB_EP_BUF0COUNT_OFFSET 0x08 /* Buffer 0 Count */
> @@ -169,6 +178,7 @@ struct xusb_ep {
> * @setup: usb_ctrlrequest structure for control requests
> * @req: pointer to dummy request for get status command
> * @dev: pointer to device structure in gadget
> + * @is_extend_dma: flag indiacting whether the dma is 64-bit support or not.
> * @usb_state: device in suspended state or not
> * @remote_wkp: remote wakeup enabled by host
> * @setupseqtx: tx status
> @@ -186,6 +196,7 @@ struct xusb_udc {
> struct usb_ctrlrequest setup;
> struct xusb_req *req;
> struct device *dev;
> + bool is_extend_dma;
> u32 usb_state;
> u32 remote_wkp;
> u32 setupseqtx;
> @@ -215,6 +226,20 @@ static const struct usb_endpoint_descriptor config_bulk_out_desc = {
> };
>
> /**
> + * xudc_write64 - write 64bit value to device registers
> + * @ep: pointer to the usb device endpoint structure.
> + * @offset: register offset
> + * @val: data to be written
> + **/
> +static void xudc_write64(struct xusb_ep *ep, u32 offset, u64 val)
> +{
> + struct xusb_udc *udc = ep->udc;
> +
> + udc->write_fn(udc->addr, offset, lower_32_bits(val));
> + udc->write_fn(udc->addr, offset+0x04, upper_32_bits(val));
can we move this to a single 64 bit write?
> +}
> +
> +/**
Powered by blists - more mailing lists