lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAJKOXPfDtp1GLCkQQSKmzRLs4qqwY9Y019rXpUXSeoYQny-sfA@mail.gmail.com>
Date:	Tue, 31 May 2016 22:05:06 +0200
From:	Krzysztof Kozlowski <krzk@...nel.org>
To:	Javier Martinez Canillas <javier@....samsung.com>
Cc:	Kukjin Kim <kgene@...nel.org>,
	Sylwester Nawrocki <s.nawrocki@...sung.com>,
	Tomasz Figa <tomasz.figa@...il.com>,
	Michael Turquette <mturquette@...libre.com>,
	Stephen Boyd <sboyd@...eaurora.org>,
	devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
	linux-samsung-soc@...r.kernel.org, linux-kernel@...r.kernel.org,
	linux-clk@...r.kernel.org
Subject: Re: [PATCH 5/6] ARM: dts: exynos: Configure PWM, usb3503, PMIC and
 thermal on Odroid XU board

On Tue, May 31, 2016 at 9:36 PM, Javier Martinez Canillas
<javier@....samsung.com> wrote:
> Hello Krzysztof,
>
> On 05/31/2016 02:39 PM, Krzysztof Kozlowski wrote:
>> Extend the DTS for Exynos5410-based Odroid XU board with:
>> 1. Proper PWM outputs,
>> 2. usb3503 USB HUB (with integrated LAN9730 ethernet adapter (smsc95xx)),
>> 3. Maxim 77802 PMIC (regulators, 32 kHz clocks, RTC),
>> 4. CPU thermal (trip points are the same as in Odroid XU3/XU4 but
>>    cooling maps are different as there is no CPU freq and only one
>>    cluster available for now),
>> 5. Regulator supplies for USB 3.0.
>>
>> Signed-off-by: Krzysztof Kozlowski <krzk@...nel.org>
>>
>> ---
>>
>
> [snip]
>
>> +
>> +                     ldo10_reg: LDO10 {
>> +                             regulator-name = "vdd18_mipi";
>> +                             regulator-min-microvolt = <1800000>;
>> +                             regulator-max-microvolt = <1800000>;
>> +                             regulator-always-on;
>> +                     };
>> +
>
> [snip]
>
>> +
>> +                     ldo12_reg: LDO12 {
>> +                             regulator-name = "vdd33_usb3";
>> +                             regulator-min-microvolt = <3300000>;
>> +                             regulator-max-microvolt = <3300000>;
>> +                             regulator-always-on;
>> +                     };
>> +
>
> [snip]
>
>> +
>> +                     ldo15_reg: LDO15 {
>> +                             regulator-name = "vdd10_usb3";
>> +                             regulator-min-microvolt = <1000000>;
>> +                             regulator-max-microvolt = <1000000>;
>> +                             regulator-always-on;
>> +                     };
>> +
>
> I see that LDO 10, 12 and 15 are used by still marked as always-on. Did
> you try not marking as always-on those or that also causes issues like
> in the other regulators were you added comments about being always-on?
>
> Besides that, patch looks good to me.

The LDO10 is supplying few more elements (MIPI, HDMI, ADC and
something called EFNAND). Having it non-always-on still works but
maybe because I did not test these elements.

LDO12 and LDO15 supply also VDD10_HSIC and UHOST (used by USB2.0 ports
and attached on board: usb3503 and lan9730) so if it is not enabled by
USB 3.0, then they won't work. I guess the usb 2.0 driver should also
take regulators.

So overall the board works after removing always-on but it is not
properly described in DT so I prefer to leave them.

Best regards,
Krzysztof

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ