linux-kernel - [PATCH v3 12/12] ARM: dts: exynos: Fix LAN and HUB after bootloader initialization on Odroid U3

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-id: <1464768141-25420-13-git-send-email-k.kozlowski@samsung.com>
Date:	Wed, 01 Jun 2016 10:02:21 +0200
From:	Krzysztof Kozlowski <k.kozlowski@...sung.com>
To:	hzpeterchen@...il.com, Ulf Hansson <ulf.hansson@...aro.org>,
	Sebastian Reichel <sre@...nel.org>,
	Dmitry Eremin-Solenikov <dbaryshkov@...il.com>,
	David Woodhouse <dwmw2@...radead.org>,
	Krzysztof Kozlowski <k.kozlowski@...sung.com>,
	Javier Martinez Canillas <javier@....samsung.com>,
	linux-kernel@...r.kernel.org, linux-mmc@...r.kernel.org,
	linux-pm@...r.kernel.or, Alan Stern <stern@...land.harvard.edu>,
	linux-usb@...r.kernel.org, Rob Herring <robh+dt@...nel.org>,
	Pawel Moll <pawel.moll@....com>,
	Mark Rutland <mark.rutland@....com>,
	Ian Campbell <ijc+devicetree@...lion.org.uk>,
	Kumar Gala <galak@...eaurora.org>,
	Kukjin Kim <kgene@...nel.org>, devicetree@...r.kernel.org,
	linux-arm-kernel@...ts.infradead.org,
	linux-samsung-soc@...r.kernel.org
Cc:	Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
	Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>
Subject: [PATCH v3 12/12] ARM: dts: exynos: Fix LAN and HUB after bootloader
 initialization on Odroid U3

On Odroid U3 (Exynos4412-based) board if USB was initialized by
bootloader (in U-Boot "usb start" before tftpboot), the HUB (usb3503)
and LAN (smsc95xx) after after successful probing were not visible in the
system ("lsusb").

In such case the devices had to be fully reset before configuring.
Reset by GPIO (called RESET_N pin) and by RESET field in STCD register
in usb3503 HUB are not sufficient. Instead full reset has to be done by
disabling and enabling regulator.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@...sung.com>
---
 arch/arm/boot/dts/exynos4412-odroidu3.dts | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/boot/dts/exynos4412-odroidu3.dts b/arch/arm/boot/dts/exynos4412-odroidu3.dts
index 31cdc036fda4..23e30e4609df 100644
--- a/arch/arm/boot/dts/exynos4412-odroidu3.dts
+++ b/arch/arm/boot/dts/exynos4412-odroidu3.dts
@@ -99,11 +99,15 @@
 	clock-names = "refclk";
 	clocks = <&pmu_system_controller 0>;
 	refclk-frequency = <24000000>;
+
+	power-sequence;
+	ext-supply = <&buck8_reg>;
 };
 
 &ehci {
 	port@1 {
 		status = "okay";
+		usb-pwrseq = <&usb3503>;
 	};
 	port@2 {
 		status = "okay";
-- 
1.9.1