linux-kernel - [PATCH 31/32] enable wireless

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [day] [month] [year] [list]

Message-Id: <1464817421-8519-32-git-send-email-kraxel@redhat.com>
Date:	Wed,  1 Jun 2016 23:43:40 +0200
From:	Gerd Hoffmann <kraxel@...hat.com>
To:	linux-rpi-kernel@...ts.infradead.org
Cc:	Eric Anholt <eric@...olt.net>,
	Florian Fainelli <f.fainelli@...il.com>,
	Ray Jui <rjui@...adcom.com>,
	Scott Branden <sbranden@...adcom.com>,
	Rob Herring <robh+dt@...nel.org>,
	Pawel Moll <pawel.moll@....com>,
	Mark Rutland <mark.rutland@....com>,
	Ian Campbell <ijc+devicetree@...lion.org.uk>,
	Kumar Gala <galak@...eaurora.org>,
	Catalin Marinas <catalin.marinas@....com>,
	Will Deacon <will.deacon@....com>,
	bcm-kernel-feedback-list@...adcom.com (open list:BROADCOM
	BCM281XX/BCM11XXX/BCM216XX ARM ARCHITE...),
	devicetree@...r.kernel.org (open list:OPEN FIRMWARE AND FLATTENED
	DEVICE TREE BINDINGS),
	linux-arm-kernel@...ts.infradead.org (moderated list:ARM64 PORT
	(AARCH64 ARCHITECTURE)), linux-kernel@...r.kernel.org (open list)
Subject: [PATCH 31/32] enable wireless

From: Eric Anholt <eric@...olt.net>

Signed-off-by: Eric Anholt <eric@...olt.net>

Conflicts:
	arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts
---
 arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts
index 202e8c3..8d24a39 100644
--- a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts
+++ b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts
@@ -55,3 +55,18 @@
 &hdmi {
 	hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
 };
+
+/* SDHOST is used to drive the SD card */
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	status = "okay";
+};
+
+/* SDHCI is used to control the SDIO for wireless */
+&sdhci {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_gpio34>;
+	status = "okay";
+	non-removable;
+};
-- 
1.8.3.1