linux-kernel - [PATCH 29/32] ARM: bcm2835: Use i2c-gpio for the expander, instead.

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [day] [month] [year] [list]

Message-Id: <1464817421-8519-30-git-send-email-kraxel@redhat.com>
Date:	Wed,  1 Jun 2016 23:43:38 +0200
From:	Gerd Hoffmann <kraxel@...hat.com>
To:	linux-rpi-kernel@...ts.infradead.org
Cc:	Eric Anholt <eric@...olt.net>,
	Florian Fainelli <f.fainelli@...il.com>,
	Ray Jui <rjui@...adcom.com>,
	Scott Branden <sbranden@...adcom.com>,
	Rob Herring <robh+dt@...nel.org>,
	Pawel Moll <pawel.moll@....com>,
	Mark Rutland <mark.rutland@....com>,
	Ian Campbell <ijc+devicetree@...lion.org.uk>,
	Kumar Gala <galak@...eaurora.org>,
	Catalin Marinas <catalin.marinas@....com>,
	Will Deacon <will.deacon@....com>,
	bcm-kernel-feedback-list@...adcom.com (open list:BROADCOM
	BCM281XX/BCM11XXX/BCM216XX ARM ARCHITE...),
	devicetree@...r.kernel.org (open list:OPEN FIRMWARE AND FLATTENED
	DEVICE TREE BINDINGS),
	linux-arm-kernel@...ts.infradead.org (moderated list:ARM64 PORT
	(AARCH64 ARCHITECTURE)), linux-kernel@...r.kernel.org (open list)
Subject: [PATCH 29/32] ARM: bcm2835: Use i2c-gpio for the expander, instead.

From: Eric Anholt <eric@...olt.net>

I'm seeing a ton of CLKT errors from i2c-bcm2835.c, and haven't
figured out a cause.

Signed-off-by: Eric Anholt <eric@...olt.net>

Conflicts:
	arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts
---
 arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts | 32 ++++++++++++------------
 1 file changed, 16 insertions(+), 16 deletions(-)

diff --git a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts
index 4bc191e..202e8c3 100644
--- a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts
+++ b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts
@@ -23,6 +23,22 @@
 			linux,default-trigger = "default-on";
 		};
 	};
+
+	i2c_gpio {
+		compatible = "i2c-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpios = <&gpio 44 0
+			 &gpio 45 0>;
+
+		gpio_expander: gpio@43 {
+			gpio-controller;
+			#gpio-cells = <2>;
+			reg = <0x43>;
+			compatible = "fcs,fxl6408";
+		};
+	};
 };
 
 &i2s {
@@ -39,19 +55,3 @@
 &hdmi {
 	hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
 };
-
-/* Connect the GPIO expander to I2C1 */
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_gpio44>;
-
-	gpio_expander: gpio@43 {
-		gpio-controller;
-		#gpio-cells = <2>;
-		reg = <0x43>;
-		compatible = "fcs,fxl6408";
-	};
-};
-
-bt {
-};
-- 
1.8.3.1