Message-ID: <b9d597d9c78b454ebece5bd23f7fce9a@US-EXCH13-2.na.uis.unisys.com>
Date:	Thu, 2 Jun 2016 05:02:11 +0000
From:	"Sell, Timothy C" <Timothy.Sell@...sys.com>
To:	Neil Horman <nhorman@...hat.com>
CC:	"Kershner, David A" <David.Kershner@...sys.com>,
	"corbet@....net" <corbet@....net>,
	"tglx@...utronix.de" <tglx@...utronix.de>,
	"mingo@...hat.com" <mingo@...hat.com>,
	"hpa@...or.com" <hpa@...or.com>,
	"gregkh@...uxfoundation.org" <gregkh@...uxfoundation.org>,
	"Arfvidson, Erik" <Erik.Arfvidson@...sys.com>,
	"hofrat@...dl.org" <hofrat@...dl.org>,
	"dzickus@...hat.com" <dzickus@...hat.com>,
	"jes.sorensen@...hat.com" <jes.sorensen@...hat.com>,
	"Curtin, Alexander Paul" <Alexander.Curtin@...sys.com>,
	"janani.rvchndrn@...il.com" <janani.rvchndrn@...il.com>,
	"sudipm.mukherjee@...il.com" <sudipm.mukherjee@...il.com>,
	"prarit@...hat.com" <prarit@...hat.com>,
	"Binder, David Anthony" <David.Binder@...sys.com>,
	"dan.j.williams@...el.com" <dan.j.williams@...el.com>,
	"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
	"linux-doc@...r.kernel.org" <linux-doc@...r.kernel.org>,
	"driverdev-devel@...uxdriverproject.org" 
	<driverdev-devel@...uxdriverproject.org>,
	*S-Par-Maintainer <SParMaintainer@...sys.com>
Subject: RE: [PATCH v2 10/27] staging: unisys: visorinput: remove unnecessary
 locking

> -----Original Message-----
> From: Neil Horman [mailto:nhorman@...hat.com]
> Sent: Wednesday, June 01, 2016 2:43 PM
> To: Sell, Timothy C
> Cc: Kershner, David A; corbet@....net; tglx@...utronix.de;
> mingo@...hat.com; hpa@...or.com; gregkh@...uxfoundation.org;
> Arfvidson, Erik; hofrat@...dl.org; dzickus@...hat.com;
> jes.sorensen@...hat.com; Curtin, Alexander Paul;
> janani.rvchndrn@...il.com; sudipm.mukherjee@...il.com;
> prarit@...hat.com; Binder, David Anthony; dan.j.williams@...el.com;
> linux-kernel@...r.kernel.org; linux-doc@...r.kernel.org; driverdev-
> devel@...uxdriverproject.org; *S-Par-Maintainer
> Subject: Re: [PATCH v2 10/27] staging: unisys: visorinput: remove
> unnecessary locking
> 
> On Wed, Jun 01, 2016 at 03:09:13PM +0000, Sell, Timothy C wrote:
> > > -----Original Message-----
> > > From: Neil Horman [mailto:nhorman@...hat.com]
> > > Sent: Wednesday, June 01, 2016 10:18 AM
> > > To: Kershner, David A
> > > Cc: corbet@....net; tglx@...utronix.de; mingo@...hat.com;
> > > hpa@...or.com; gregkh@...uxfoundation.org; Arfvidson, Erik; Sell,
> Timothy
> > > C; hofrat@...dl.org; dzickus@...hat.com; jes.sorensen@...hat.com;
> > > Curtin, Alexander Paul; janani.rvchndrn@...il.com;
> > > sudipm.mukherjee@...il.com; prarit@...hat.com; Binder, David
> Anthony;
> > > dan.j.williams@...el.com; linux-kernel@...r.kernel.org; linux-
> > > doc@...r.kernel.org; driverdev-devel@...uxdriverproject.org; *S-Par-
> > > Maintainer
> > > Subject: Re: [PATCH v2 10/27] staging: unisys: visorinput: remove
> > > unnecessary locking
> > >
> > > On Tue, May 31, 2016 at 10:26:36PM -0400, David Kershner wrote:
> > > > From: Tim Sell <Timothy.Sell@...sys.com>
> > > >
> > > > Locking in the _interrupt() function is NOT necessary so long as we
> ensure
> > > > that interrupts have been stopped whenever we need to pause or
> resume
> > > the
> > > > device, which we now do.
> > > >
> > > > While a device is paused, we ensure that interrupts stay disabled, i.e.
> > > > that the _interrupt() function will NOT be called, yet remember the
> > > desired
> > > > state in devdata->interrupts_enabled if open() or close() are called are
> > > > called while the device is paused.  Then when the device is resumed,
> we
> > > > restore the actual state of interrupts (i.e., whether _interrupt() is going
> > > > to be called or not) to the desired state in devdata-
> >interrupts_enabled.
> > > >
> > > > Signed-off-by: Tim Sell <Timothy.Sell@...sys.com>
> > > > Signed-off-by: David Kershner <david.kershner@...sys.com>
> > > > ---
> > > >  drivers/staging/unisys/visorinput/visorinput.c | 57
> > > +++++++++++++++++++++-----
> > > >  1 file changed, 47 insertions(+), 10 deletions(-)
> > > >
> > > > diff --git a/drivers/staging/unisys/visorinput/visorinput.c
> > > b/drivers/staging/unisys/visorinput/visorinput.c
> > > > index 12a3570..9c00710 100644
> > > > --- a/drivers/staging/unisys/visorinput/visorinput.c
> > > > +++ b/drivers/staging/unisys/visorinput/visorinput.c
> > > > @@ -66,6 +66,7 @@ struct visorinput_devdata {
> > > >  	struct rw_semaphore lock_visor_dev; /* lock for dev */
> > > >  	struct input_dev *visorinput_dev;
> > > >  	bool paused;
> > > > +	bool interrupts_enabled;
> > > >  	unsigned int keycode_table_bytes; /* size of following array */
> > > >  	/* for keyboard devices: visorkbd_keycode[] +
> > > visorkbd_ext_keycode[] */
> > > >  	unsigned char keycode_table[0];
> > > > @@ -228,7 +229,21 @@ static int visorinput_open(struct input_dev
> > > *visorinput_dev)
> > > >  		return -EINVAL;
> > > >  	}
> > > >  	dev_dbg(&visorinput_dev->dev, "%s opened\n", __func__);
> > > > +
> > > > +	/*
> > > > +	 * If we're not paused, really enable interrupts.
> > > > +	 * Regardless of whether we are paused, set a flag indicating
> > > > +	 * interrupts should be enabled so when we resume, interrupts
> > > > +	 * will really be enabled.
> > > > +	 */
> > > > +	down_write(&devdata->lock_visor_dev);
> > > > +	devdata->interrupts_enabled = true;
> > > > +	if (devdata->paused)
> > > > +		goto out_unlock;
> > > Don't you want to wait until you actually enable interrupts here to set
> > > interrupts_enabled to true?  Otherwise, if devdata->paused is true, you
> will
> > > be
> > > out of sync.
> >
> > No.  That's the intent of this code, to remember what the
> > state of interrupts SHOULD be (via devdata->interrupts_enabled), at
> > a point in time when interrupts can NOT be enabled, e.g., when
> > the device is paused (devdata->paused).  After the device is resumed,
> > the real interrupt state (visorbus_enable_channel_interrupts())
> > will be synchronized with the remembered state.
> >
> 
> Ok, I'll buy that, but it still looks rather racy to me.  It appears to me that
> the code path in which the paused state is toggled
> (visorinput_pause|resume), is
> called from a path that originates in visorchipset, specifically in the work
> queue function controlvm_periodic_work.  Given that, its entirely possible
> for
> the paused state of the virutal hardware to change while the device is being
> opened.  That is to say devdata->paused can become true immediately after
> its
> checked in visorinput_open above, and so we can enable interrupts on
> hardware
> that is paused, which seems to be what this code is trying to avoid.
> 

You are absolutely correct about the 2 different threads of execution
where these functions can be called.

But in this code, we hold devdata->lock_visor_dev in order to prevent
the scenario you describe.  I.e., the code in all of the paths involved:
* never changes dev->paused or dev->interrupts_enabled without
holding devdata->lock_visor_dev
* never makes any decisions based on dev->paused or
dev->interrupts_enabled without holding devdata->lock_visor_dev

> > >
> > > >  	visorbus_enable_channel_interrupts(devdata->dev);
> > > > +
> > > > +out_unlock:
> > > > +	up_write(&devdata->lock_visor_dev);
> > > >  	return 0;
> > > >  }
> > > >
> > > > @@ -243,7 +258,22 @@ static void visorinput_close(struct input_dev
> > > *visorinput_dev)
> > > >  		return;
> > > >  	}
> > > >  	dev_dbg(&visorinput_dev->dev, "%s closed\n", __func__);
> > > > +
> > > > +	/*
> > > > +	 * If we're not paused, really disable interrupts.
> > > > +	 * Regardless of whether we are paused, set a flag indicating
> > > > +	 * interrupts should be disabled so when we resume we will
> > > > +	 * not re-enable them.
> > > > +	 */
> > > > +
> > > > +	down_write(&devdata->lock_visor_dev);
> > > > +	devdata->interrupts_enabled = false;
> > > > +	if (devdata->paused)
> > > > +		goto out_unlock;
> > > Ditto to my above comment
> >
> > Ditto my response above.
> >
> Same comment regarding racyness.
> 
> > >
> > > >  	visorbus_disable_channel_interrupts(devdata->dev);
> > > > +
> > > > +out_unlock:
> > > > +	up_write(&devdata->lock_visor_dev);
> > > >  }
> > > >
> > > >  /*
> > > > @@ -438,10 +468,8 @@ visorinput_remove(struct visor_device *dev)
> > > >  	 * in visorinput_channel_interrupt()
> > > >  	 */
> > > >
> > > > -	down_write(&devdata->lock_visor_dev);
> > > >  	dev_set_drvdata(&dev->device, NULL);
> > > >  	unregister_client_input(devdata->visorinput_dev);
> > > > -	up_write(&devdata->lock_visor_dev);
> > > >  	kfree(devdata);
> > > >  }
> > > >
> > > > @@ -529,13 +557,7 @@ visorinput_channel_interrupt(struct
> visor_device
> > > *dev)
> > > >  	if (!devdata)
> > > >  		return;
> > > >
> > > > -	down_write(&devdata->lock_visor_dev);
> > > > -	if (devdata->paused) /* don't touch device/channel when paused */
> > > > -		goto out_locked;
> > > > -
> > > >  	visorinput_dev = devdata->visorinput_dev;
> > > > -	if (!visorinput_dev)
> > > > -		goto out_locked;
> > > >
> > > >  	while (visorchannel_signalremove(dev->visorchannel, 0, &r)) {
> > > >  		scancode = r.activity.arg1;
> > > > @@ -611,8 +633,6 @@ visorinput_channel_interrupt(struct
> visor_device
> > > *dev)
> > > >  			break;
> > > >  		}
> > > >  	}
> > > > -out_locked:
> > > > -	up_write(&devdata->lock_visor_dev);
> > > >  }
> > > >
> > > >  static int
> > > > @@ -632,6 +652,14 @@ visorinput_pause(struct visor_device *dev,
> > > >  		rc = -EBUSY;
> > > >  		goto out_locked;
> > > >  	}
> > > > +	if (devdata->interrupts_enabled)
> > > > +		visorbus_disable_channel_interrupts(dev);
> > > > +
> > > > +	/*
> > > > +	 * due to above, at this time no thread of execution will be
> > > > +	 * in visorinput_channel_interrupt()
> > > > +	 */
> > > > +
> > > >  	devdata->paused = true;
> > > >  	complete_func(dev, 0);
> > > >  	rc = 0;
> > > > @@ -659,6 +687,15 @@ visorinput_resume(struct visor_device *dev,
> > > >  	}
> > > >  	devdata->paused = false;
> > > >  	complete_func(dev, 0);
> > > > +
> > > > +	/*
> > > > +	 * Re-establish calls to visorinput_channel_interrupt() if that is
> > > > +	 * the desired state that we've kept track of in interrupts_enabled
> > > > +	 * while the device was paused.
> > > > +	 */
> > > > +	if (devdata->interrupts_enabled)
> > > > +		visorbus_enable_channel_interrupts(dev);
> > > > +
> > >
> > > Unless I'm mistaken, it seems that visorinput_pause and
> visorinput_open or
> > > close
> > > can be called in parallel on different cpus.  As such the state of
> > > interrupts_enabled may change during the execution of this function,
> which
> > > would
> > > lead to interrupts not getting properly enabled.
> > >
> >
> >
> > You are correct that visorinput_pause and visorinput_open/close
> > can be called in parallel.  However, as I alluded to in my comment
> > above, the intent of this code is to just restore the actual interrupt
> > state with the desired state (remembered in
> > devdata->interrupts_enabled).  It's ok if interrupts don't get
> > enabled, because that would be our intent if there are no longer
> > any users of the device.  (In this case visorinput_close() would have
> > been called and devdata->interrupts_enabled would have got set
> > false while the device was paused.)
> >
> 
> 
> Heres an illustration of my concern.  Assume the visorinput device is
> currently
> paused, and someone has called open on it while at the same time
> resuming it
> 
> CPU0				CPU1
> 				visoinput_resume
> visorinput_open
>  <handle random smi>		check ->interrupts_enabled (false)
>  <return from smi>		<handle random smi>
>  set interrupts_enabled=true
>  check ->paused (true)		<return from smi>
> 				set ->paused = true
>  return 0
> 
> In the above scenario visorinput_open and visorinput_resume will both
> return
> without having enabled interrupts, rendering the device non-responsive.
> 
> A simmmilar scenario can be seen on close/pause, in which interrupts are
> left
> enabled on a device that is paused.
> 
> It seems you can't remove all level of serialization here (though you can
> remove
> some).  I would recommend that, instead of keeping your own mutex, you
> instead
> augment visorinput_pause/resume, to extract the input_device structure
> from the
> driver private data and hold the input device mutex when
> pausing/resuming the
> device.  That will ensure that neither the paused or interrupts_enabled
> state
> will change during the execution of visorinput_open/close
> 
> Neil

Nice illustration.  That would usually be enough to drill something thru
my thick skull, but I'm still missing something in this case.  ;-(

I'm still missing how this scenario could happen given our usage of 
devdata->lock_visor_dev.  We hold that lock for the entire execution of
visorinput_open(), visorinput_close(), visorinput_pause(), and
visorinput_resume(), where we are dealing with the checks and state
transitions of devdata->paused, devdata->interrupts_enabled, and
the actual state of channel interrupts.  So even if the circumstance
presented itself where we were ready to run thru 2 of those functions
for the same device on mutiple cpus at the same exact time, the
execution would be serialized due to devdata->lock_visor_dev.

Tim Sell

Powered by blists - more mailing lists