| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20160602151932.GB31124@shlinux2>
Date: Thu, 2 Jun 2016 23:19:32 +0800
From: Dong Aisheng <dongas86@...il.com>
To: Stefan Agner <stefan@...er.ch>
Cc: Dong Aisheng <aisheng.dong@....com>, linux-clk@...r.kernel.org,
linux-kernel@...r.kernel.org, sboyd@...eaurora.org,
mturquette@...libre.com, shawnguo@...nel.org,
linux-arm-kernel@...ts.infradead.org, l.stach@...gutronix.de
Subject: Re: [RFC PATCH 1/1] clk: imx7d: move clk setting out of
imx7d_clocks_init
On Fri, Apr 29, 2016 at 07:04:33PM -0700, Stefan Agner wrote:
> On 2016-04-29 02:45, Dong Aisheng wrote:
> > During kernel early booting(e.g. in time_init()), there's only one
> > init idle task running, and the idle sched class indicates that it's
> > not valid to schedule for idle task. If it happens the kernel
> > will complain with a error message as follows:
> > [ 0.000000] bad: scheduling from the idle thread!
> >
> > We can observe this warning on an i.MX7D SDB board. See full log below.
> > It is caused by imx7d_clocks_init function called in time_init
> > invokes a lot clk_prepare_enable to enable many clocks and it happens
> > that the Audio/Video PLLs need large delay causes a sleep.
> >
> > Since we should not sleep during time_init, this patch fundamentally
> > moves all clk_prepare_enable and clk_set_parent out of imx7d_clocks_init
> > and use a postcore init function imx7d_clocks_setup to do it later instead.
> > Then we simply reply on the bootloader settings to do early boot.
>
> Is this really a good idea? What happens if something requests a clock
> before postcore initcalls get called? E.g. clock source is initialized
> before that, which might request a clock...
>
I think clock source driver usually will do clock configuration by itself
and it does not depends on imx7d_clocks_init.
e.g. smp_twd.c / timer-imx-gpt.c
However, one exception is that if the clock source needs change clock
parent, it may have to be done in its driver too.
Up till now we still have no such requirement and no board do like that.
> Ok, we can just say that all those clocks need to be bootloader on, but
> how do we know? Do we catch if the bootloader does not adhere to that?
>
clk source driver may need to handle that work and it seems we already
do that work in timer-imx-gpt.c.
But as i replied in another earlier email, clk source driver itself
may also result in a possible sleep with clock operation which is
a potential break too.
We may need discuss to find a suitable generic solution.
Regards
Dong Aisheng
> --
> Stefan
>
>
> >
> > [ 0.000000] bad: scheduling from the idle thread!
> > [ 0.000000] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W
> > 4.6.0-rc3-00064-gded8bc08fb45-dirty #836
> > [ 0.000000] Hardware name: Freescale i.MX7 Dual (Device Tree)
> > [ 0.000000] Backtrace:
> > [ 0.000000] [<c010c42c>] (dump_backtrace) from [<c010c624>]
> > (show_stack+0x18/0x1c)
> > [ 0.000000] r6:60000053 r5:00000000 r4:c0d21f9c r3:00000000
> > [ 0.000000] [<c010c60c>] (show_stack) from [<c03e0228>]
> > (dump_stack+0xb4/0xe8)
> > [ 0.000000] [<c03e0174>] (dump_stack) from [<c0154388>]
> > (dequeue_task_idle+0x20/0x30)
> > [ 0.000000] r10:c08f5554 r9:c0d02b0c r8:c0d06844 r7:ef7c14d0
> > r6:00000001 r5:ef7c14c0
> > [ 0.000000] r4:ef7c14c0 r3:00000000
> > [ 0.000000] [<c0154368>] (dequeue_task_idle) from [<c014c968>]
> > (deactivate_task+0x64/0x68)
> > [ 0.000000] r4:c0d06500 r3:c0154368
> > [ 0.000000] [<c014c904>] (deactivate_task) from [<c08f50bc>]
> > (__schedule+0x2e8/0x738)
> > [ 0.000000] r6:c0d06500 r5:ef7c14c0 r4:c0c744c0 r3:00000002
> > [ 0.000000] [<c08f4dd4>] (__schedule) from [<c08f5554>] (schedule+0x48/0xa0)
> > [ 0.000000] r10:000001b6 r9:00000003 r8:00000036 r7:00000000
> > r6:0007a120 r5:00000000
> > [ 0.000000] r4:c0d00000
> > [ 0.000000] [<c08f550c>] (schedule) from [<c08f9cc8>]
> > (schedule_hrtimeout_range_clock+0xac/0x12c)
> > [ 0.000000] r4:0006ddd0 r3:c0d06500
> > [ 0.000000] [<c08f9c1c>] (schedule_hrtimeout_range_clock) from
> > [<c08f9d6c>] (schedule_hrtimeout_range+0x24/0x2c)
> > [ 0.000000] r7:c0d5d434 r6:c0d02100 r5:ffff8ad1 r4:ef00c040
> > [ 0.000000] [<c08f9d48>] (schedule_hrtimeout_range) from
> > [<c08f97a4>] (usleep_range+0x54/0x5c)
> > [ 0.000000] [<c08f9750>] (usleep_range) from [<c06984c8>]
> > (clk_pllv3_wait_lock+0x7c/0xb4)
> > [ 0.000000] [<c069844c>] (clk_pllv3_wait_lock) from [<c069852c>]
> > (clk_pllv3_prepare+0x2c/0x30)
> > [ 0.000000] r6:00000000 r5:c15603f4 r4:ef007680 r3:0000201b
> > [ 0.000000] [<c0698500>] (clk_pllv3_prepare) from [<c0691eb8>]
> > (clk_core_prepare+0x98/0xc8)
> > [ 0.000000] [<c0691e20>] (clk_core_prepare) from [<c06923d4>]
> > (clk_prepare+0x20/0x38)
> > [ 0.000000] r5:c15603f4 r4:ef00c100
> > [ 0.000000] [<c06923b4>] (clk_prepare) from [<c0c4a55c>]
> > (imx7d_clocks_init+0x6108/0x6188)
> > [ 0.000000] r4:ef00c100 r3:00000001
> > [ 0.000000] [<c0c44454>] (imx7d_clocks_init) from [<c0c30e38>]
> > (of_clk_init+0x10c/0x1d4)
> > [ 0.000000] r10:00000001 r9:c0d01f68 r8:00000000 r7:c0d01f60
> > r6:ef7e3d60 r5:ef004340
> > [ 0.000000] r4:00000002
> > [ 0.000000] [<c0c30d2c>] (of_clk_init) from [<c0c048b0>]
> > (time_init+0x2c/0x38)
> > [ 0.000000] r10:efffcac0 r9:c0c5ca48 r8:c0d76000 r7:c0d028c0
> > r6:ffffffff r5:c0d76000
> > [ 0.000000] r4:00000000
> > [ 0.000000] [<c0c04884>] (time_init) from [<c0c00b7c>]
> > (start_kernel+0x218/0x398)
> > [ 0.000000] [<c0c00964>] (start_kernel) from [<8000807c>] (0x8000807c)
> > [ 0.000000] r10:00000000 r9:410fc075 r8:8000406a r7:c0d07e8c
> > r6:c0c5ca44 r5:c0d0296c
> > [ 0.000000] r4:c0d76294
> > [ 0.000000] Architected cp15 timer(s) running at 8.00MHz (virt).
> > [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff
> > max_cycles: 0x1d854df40, max_idle_ns: 440795202120 ns
> >
> > Cc: Michael Turquette <mturquette@...libre.com>
> > Cc: Stephen Boyd <sboyd@...eaurora.org>
> > Cc: Shawn Guo <shawnguo@...nel.org>
> > Cc: Stefan Agner <stefan@...er.ch>
> > Cc: Lucas Stach <l.stach@...gutronix.de>
> > Signed-off-by: Dong Aisheng <aisheng.dong@....com>
> > ---
> > drivers/clk/imx/clk-imx7d.c | 25 ++++++++++++++++---------
> > 1 file changed, 16 insertions(+), 9 deletions(-)
> >
> > diff --git a/drivers/clk/imx/clk-imx7d.c b/drivers/clk/imx/clk-imx7d.c
> > index 7912be83c4af..3be2e9371491 100644
> > --- a/drivers/clk/imx/clk-imx7d.c
> > +++ b/drivers/clk/imx/clk-imx7d.c
> > @@ -378,7 +378,6 @@ static void __init imx7d_clocks_init(struct
> > device_node *ccm_node)
> > {
> > struct device_node *np;
> > void __iomem *base;
> > - int i;
> >
> > clks[IMX7D_CLK_DUMMY] = imx_clk_fixed("dummy", 0);
> > clks[IMX7D_OSC_24M_CLK] = of_clk_get_by_name(ccm_node, "osc");
> > @@ -409,13 +408,6 @@ static void __init imx7d_clocks_init(struct
> > device_node *ccm_node)
> > clks[IMX7D_PLL_AUDIO_MAIN_BYPASS] =
> > imx_clk_mux_flags("pll_audio_main_bypass", base + 0xf0, 16, 1,
> > pll_audio_bypass_sel, ARRAY_SIZE(pll_audio_bypass_sel),
> > CLK_SET_RATE_PARENT);
> > clks[IMX7D_PLL_VIDEO_MAIN_BYPASS] =
> > imx_clk_mux_flags("pll_video_main_bypass", base + 0x130, 16, 1,
> > pll_video_bypass_sel, ARRAY_SIZE(pll_video_bypass_sel),
> > CLK_SET_RATE_PARENT);
> >
> > - clk_set_parent(clks[IMX7D_PLL_ARM_MAIN_BYPASS], clks[IMX7D_PLL_ARM_MAIN]);
> > - clk_set_parent(clks[IMX7D_PLL_DRAM_MAIN_BYPASS], clks[IMX7D_PLL_DRAM_MAIN]);
> > - clk_set_parent(clks[IMX7D_PLL_SYS_MAIN_BYPASS], clks[IMX7D_PLL_SYS_MAIN]);
> > - clk_set_parent(clks[IMX7D_PLL_ENET_MAIN_BYPASS], clks[IMX7D_PLL_ENET_MAIN]);
> > - clk_set_parent(clks[IMX7D_PLL_AUDIO_MAIN_BYPASS], clks[IMX7D_PLL_AUDIO_MAIN]);
> > - clk_set_parent(clks[IMX7D_PLL_VIDEO_MAIN_BYPASS], clks[IMX7D_PLL_VIDEO_MAIN]);
> > -
> > clks[IMX7D_PLL_ARM_MAIN_CLK] = imx_clk_gate("pll_arm_main_clk",
> > "pll_arm_main_bypass", base + 0x60, 13);
> > clks[IMX7D_PLL_DRAM_MAIN_CLK] = imx_clk_gate("pll_dram_main_clk",
> > "pll_dram_main_bypass", base + 0x70, 13);
> > clks[IMX7D_PLL_SYS_MAIN_CLK] = imx_clk_gate("pll_sys_main_clk",
> > "pll_sys_main_bypass", base + 0xb0, 13);
> > @@ -846,6 +838,13 @@ static void __init imx7d_clocks_init(struct
> > device_node *ccm_node)
> > clk_data.clk_num = ARRAY_SIZE(clks);
> > of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
> >
> > +}
> > +CLK_OF_DECLARE(imx7d, "fsl,imx7d-ccm", imx7d_clocks_init);
> > +
> > +static int __init imx7d_clocks_setup(void)
> > +{
> > + int i;
> > +
> > /* TO BE FIXED LATER
> > * Enable all clock to bring up imx7, otherwise system will be halt and block
> > * the other part upstream Because imx7d clock design changed, clock framework
> > @@ -855,6 +854,13 @@ static void __init imx7d_clocks_init(struct
> > device_node *ccm_node)
> > for (i = 0; i < IMX7D_CLK_END; i++)
> > clk_prepare_enable(clks[i]);
> >
> > + clk_set_parent(clks[IMX7D_PLL_ARM_MAIN_BYPASS], clks[IMX7D_PLL_ARM_MAIN]);
> > + clk_set_parent(clks[IMX7D_PLL_DRAM_MAIN_BYPASS], clks[IMX7D_PLL_DRAM_MAIN]);
> > + clk_set_parent(clks[IMX7D_PLL_SYS_MAIN_BYPASS], clks[IMX7D_PLL_SYS_MAIN]);
> > + clk_set_parent(clks[IMX7D_PLL_ENET_MAIN_BYPASS], clks[IMX7D_PLL_ENET_MAIN]);
> > + clk_set_parent(clks[IMX7D_PLL_AUDIO_MAIN_BYPASS], clks[IMX7D_PLL_AUDIO_MAIN]);
> > + clk_set_parent(clks[IMX7D_PLL_VIDEO_MAIN_BYPASS], clks[IMX7D_PLL_VIDEO_MAIN]);
> > +
> > /* use old gpt clk setting, gpt1 root clk must be twice as gpt counter freq */
> > clk_set_parent(clks[IMX7D_GPT1_ROOT_SRC], clks[IMX7D_OSC_24M_CLK]);
> >
> > @@ -874,5 +880,6 @@ static void __init imx7d_clocks_init(struct
> > device_node *ccm_node)
> >
> > imx_register_uart_clocks(uart_clks);
> >
> > + return 0;
> > }
> > -CLK_OF_DECLARE(imx7d, "fsl,imx7d-ccm", imx7d_clocks_init);
> > +postcore_initcall(imx7d_clocks_setup);
> --
> To unsubscribe from this list: send the line "unsubscribe linux-clk" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists