linux-kernel - Re: [PATCH 2/5] i2c: Add STM32F4 I2C driver

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Thu, 2 Jun 2016 18:02:10 +0200
From:	Maxime Coquelin <mcoquelin.stm32@...il.com>
To:	"M'boumba Cedric Madianga" <cedric.madianga@...il.com>
Cc:	Patrice Chotard <patrice.chotard@...com>,
	Wolfram Sang <wsa@...-dreams.de>,
	Rob Herring <robh+dt@...nel.org>,
	Russell King <linux@....linux.org.uk>,
	"linux-arm-kernel@...ts.infradead.org" 
	<linux-arm-kernel@...ts.infradead.org>,
	"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
	"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
	linux-i2c@...r.kernel.org
Subject: Re: [PATCH 2/5] i2c: Add STM32F4 I2C driver

Hi Cedric,

2016-06-02 17:35 GMT+02:00 M'boumba Cedric Madianga <cedric.madianga@...il.com>:
> Hi,
>
>>> +
>>> +/**
>>> + * stm32f4_i2c_xfer() - Transfer combined I2C message
>>> + * @i2c_adap: Adapter pointer to the controller
>>> + * @msgs: Pointer to data to be written.
>>> + * @num: Number of messages to be executed
>>> + */
>>> +static int stm32f4_i2c_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg msgs[],
>>> +                           int num)
>>> +{
>>> +       struct stm32f4_i2c_dev *i2c_dev = i2c_get_adapdata(i2c_adap);
>>> +       int ret, i;
>>> +
>>> +       i2c_dev->busy = true;
>>> +
>>> +       ret = clk_prepare_enable(i2c_dev->clk);
>>> +       if (ret) {
>>> +               dev_err(i2c_dev->dev, "Failed to prepare_enable clock\n");
>>> +               return ret;
>>> +       }
>>> +
>>> +       stm32f4_i2c_hw_config(i2c_dev);
>> Maybe you could call this only at probe and resume time?
>> You would save some register accesses.
> Some clarification about this point.
> We need to call stm32f4_i2c_hw_config before each I2C transfer as at
> the end of I2C communication the peripheral is automatically disabled
> and configuration registers are reset.

Ok, but I wonder how the IP knows this is the last i2c message to be sent?
Or maybe it gets re-initialized as soon as the clk is disabled?

Thanks for the inputs,
Maxime