lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1464936651-25911-2-git-send-email-wens@csie.org>
Date:	Fri,  3 Jun 2016 14:50:50 +0800
From:	Chen-Yu Tsai <wens@...e.org>
To:	Maxime Ripard <maxime.ripard@...e-electrons.com>
Cc:	Mark Brown <broonie@...nel.org>, devicetree@...r.kernel.org,
	Chen-Yu Tsai <wens@...e.org>,
	linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: [PATCH v3 1/2] ARM: dts: sun9i: a80-optimus: Drop sunxi-common-regulators.dtsi

sunxi-common-regulators.dtsi provided dummy regulators vcc3v0, vcc3v3,
vcc5v0. 3.0V/3.3V and 5.0V are commonly used voltages in Allwinner
devices. These dummy regulators provide a stand-in when bindings that
require one, but the real regulator is not supported yet.

Since these are no longer needed, we can drop the include file by
copying over reg_usb1_vbus.

Signed-off-by: Chen-Yu Tsai <wens@...e.org>
---
 arch/arm/boot/dts/sun9i-a80-optimus.dts | 18 +++++++++++-------
 1 file changed, 11 insertions(+), 7 deletions(-)

diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts
index 6cfc02194035..78fddd9152a5 100644
--- a/arch/arm/boot/dts/sun9i-a80-optimus.dts
+++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts
@@ -44,7 +44,6 @@
 
 /dts-v1/;
 #include "sun9i-a80.dtsi"
-#include "sunxi-common-regulators.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/pinctrl/sun4i-a10.h>
@@ -85,6 +84,17 @@
 		};
 	};
 
+	reg_usb1_vbus: usb1-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb1_vbus_pin_optimus>;
+		regulator-name = "usb1-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	};
+
 	reg_usb3_vbus: usb3-vbus {
 		compatible = "regulator-fixed";
 		pinctrl-names = "default";
@@ -172,12 +182,6 @@
 	allwinner,drive = <SUN4I_PINCTRL_40_MA>;
 };
 
-&reg_usb1_vbus {
-	pinctrl-0 = <&usb1_vbus_pin_optimus>;
-	gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
-	status = "okay";
-};
-
 &r_ir {
 	status = "okay";
 };
-- 
2.8.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ