Message-ID: <20160603141555.7dad8fda@redhat.com>
Date:	Fri, 3 Jun 2016 14:15:55 +0200
From:	Jesper Dangaard Brouer <brouer@...hat.com>
To:	"Michael S. Tsirkin" <mst@...hat.com>
Cc:	linux-kernel@...r.kernel.org, Jason Wang <jasowang@...hat.com>,
	Eric Dumazet <eric.dumazet@...il.com>, davem@...emloft.net,
	netdev@...r.kernel.org, Steven Rostedt <rostedt@...dmis.org>,
	brouer@...hat.com
Subject: Re: [PATCH v5 2/2] skb_array: ring test

On Thu, 2 Jun 2016 20:47:25 +0200
Jesper Dangaard Brouer <brouer@...hat.com> wrote:

> On Tue, 24 May 2016 23:34:14 +0300
> "Michael S. Tsirkin" <mst@...hat.com> wrote:
> 
> > On Tue, May 24, 2016 at 07:03:20PM +0200, Jesper Dangaard Brouer wrote:  
> > > 
> > > On Tue, 24 May 2016 12:28:09 +0200
> > > Jesper Dangaard Brouer <brouer@...hat.com> wrote:
> > >     
> > > > I do like perf, but it does not answer my questions about the
> > > > performance of this queue. I will code something up in my own
> > > > framework[2] to answer my own performance questions.
> > > > 
> > > > Like what is be minimum overhead (in cycles) achievable with this type
> > > > of queue, in the most optimal situation (e.g. same CPU enq+deq cache hot)
> > > > for fastpath usage.    
> > > 
> > > Coded it up here:
> > >  https://github.com/netoptimizer/prototype-kernel/commit/b16a3332184
> > >  https://github.com/netoptimizer/prototype-kernel/blob/master/kernel/lib/skb_array_bench01.c
> > > 
> > > This is a really fake benchmark, but it sort of shows the  
> > > overhead achievable with this type of queue, where it is the same
> > > CPU enqueuing and dequeuing, and cache is guaranteed to be hot.
> > > 
> > > Measured on a i7-4790K CPU @ 4.00GHz, the average cost of
> > > enqueue+dequeue of a single object is around 102 cycles(tsc).
> > > 
> > > To compare this with below, where enq and deq is measured separately:
> > >  102 / 2 = 51 cycles  
> 
> The alf_queue[1] baseline is 26 cycles in this minimum overhead
> achievable benchmark with a MPMC (Multi-Producer/Multi-Consumer) queue
> which use a locked cmpxchg.  (SPSC variant is 5 cycles, thus most cost
> comes from locked cmpxchg).
> 
> [1] https://github.com/netoptimizer/prototype-kernel/blob/master/kernel/include/linux/alf_queue.h
> 
> > > > Then I also want to know how this performs when two CPUs are involved.
> > > > As this is also a primary use-case, for you when sending packets into a
> > > > guest.    
> > > 
> > > Coded it up here:
> > >  https://github.com/netoptimizer/prototype-kernel/commit/75fe31ef62e
> > >  https://github.com/netoptimizer/prototype-kernel/blob/master/kernel/lib/skb_array_parallel01.c
> > >  
> > > This parallel benchmark try to keep two (or more) CPUs busy enqueuing or
> > > dequeuing on the same skb_array queue.  It prefills the queue,
> > > and stops the test as soon as queue is empty or full, or
> > > completes a number of "loops"/cycles.
> > > 
> > > For two CPUs the results are really good:
> > >  enqueue: 54 cycles(tsc)
> > >  dequeue: 53 cycles(tsc)  
> 
> As MST points out, a scheme like the alf_queue[1] have the issue that it
> "reads" the opposite cacheline of the consumer.tail/producer.tail to
> determine if space-is-left/queue-is-empty.  This cause an expensive
> transition for the cache coherency protocol.
> 
> Coded up similar test for alf_queue:
>  https://github.com/netoptimizer/prototype-kernel/commit/b3ff2624f1
>  https://github.com/netoptimizer/prototype-kernel/blob/master/kernel/lib/alf_queue_parallel01.c
> 
> For two CPUs MPMC results are, significantly worse, and demonstrate MSTs point:
>  enqueue: 227 cycles(tsc)
>  dequeue: 231 cycles(tsc)
> 
> Alf_queue also have a SPSC (Single-Producer/Single-Consumer) variant:
>  enqueue: 24 cycles(tsc)
>  dequeue: 23 cycles(tsc)
> 
> 
> > > Going to 4 CPUs, things break down (but it was not primary use-case?):
> > >  CPU(0) 927 cycles(tsc) enqueue
> > >  CPU(1) 921 cycles(tsc) dequeue
> > >  CPU(2) 927 cycles(tsc) enqueue
> > >  CPU(3) 898 cycles(tsc) dequeue    
> > 
> > It's mostly the spinlock contention I guess.
> > Maybe we don't need fair spinlocks in this case.
> > Try replacing spinlocks with simple cmpxchg
> > and see what happens?  
> 
> The alf_queue uses a cmpxchg scheme, and it does scale better when the
> number of CPUs increase:
> 
>  CPUs:4 Average: 586 cycles(tsc)
>  CPUs:6 Average: 744 cycles(tsc)
>  CPUs:8 Average: 1578 cycles(tsc)
> 
> Notice the alf_queue was designed with the purpose of bulking, to
> mitigate the effect of this cacheline bouncing, but it was not covered
> in this test.

Added bulking to the alf_queue test:
 https://github.com/netoptimizer/prototype-kernel/commit/e22a0d8745 

This does help significantly, but requires use-cases where there are
packets to be bulk deq/enq.  On the other hand, the skb_array also
requires that objects in the queue/array exceed one cacheline, before
it starts to scale.

For two CPUs we need bulk=4 before beating skb_array.  See benchmark
adjusting bulk size:
 CPUs:2 bulk=step:1 Average: 231 cycles(tsc)
 CPUs:2 bulk=step:2 Average: 118 cycles(tsc)
 CPUs:2 bulk=step:3 Average: 65 cycles(tsc)
 CPUs:2 bulk=step:4 Average: 48 cycles(tsc)
 CPUs:2 bulk=step:5 Average: 40 cycles(tsc)
 CPUs:2 bulk=step:6 Average: 37 cycles(tsc)
 CPUs:2 bulk=step:7 Average: 29 cycles(tsc)
 CPUs:2 bulk=step:8 Average: 24 cycles(tsc)
 CPUs:2 bulk=step:9 Average: 23 cycles(tsc)
 CPUs:2 bulk=step:10 Average: 20 cycles(tsc)

Keeping bulk=8, and increasing the CPUs does show better scalability,
due to bulking.

This system (i7-4790K CPU @ 4.00GHz) only had 8-core CPUs:
 CPUs:2 bulk=step:8 Average: 25 cycles(tsc)
 CPUs:4 bulk=step:8 Average: 71 cycles(tsc)
 CPUs:6 bulk=step:8 Average: 100 cycles(tsc)
 CPUs:8 bulk=step:8 Average: 185 cycles(tsc)

Found a (slower) 24-core CPU system (E5-2695v2-ES @ 2.50GHz):
 CPUs:2 bulk=step:8 Average: 50 cycles(tsc)
 CPUs:4 bulk=step:8 Average: 101 cycles(tsc)
 CPUs:6 bulk=step:8 Average: 214 cycles(tsc)
 CPUs:8 bulk=step:8 Average: 347 cycles(tsc)
 CPUs:10 bulk=step:8 Average: 468 cycles(tsc)
 CPUs:12 bulk=step:8 Average: 670 cycles(tsc)
 CPUs:14 bulk=step:8 Average: 698 cycles(tsc)
 CPUs:16 bulk=step:8 Average: 1149 cycles(tsc)
 CPUs:18 bulk=step:8 Average: 1094 cycles(tsc)
 CPUs:20 bulk=step:8 Average: 1349 cycles(tsc)
 CPUs:22 bulk=step:8 Average: 1406 cycles(tsc)
 CPUs:24 bulk=step:8 Average: 1553 cycles(tsc)

I still think skb_array is the winner, when the normal use-case is two
CPUs, and we cannot guarantee CPU pinning (thus cannot use SPSC).

-- 
Best regards,
  Jesper Dangaard Brouer
  MSc.CS, Principal Kernel Engineer at Red Hat
  Author of http://www.iptv-analyzer.org
  LinkedIn: http://www.linkedin.com/in/brouer

Powered by blists - more mailing lists