| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <5751B562.8020708@ti.com>
Date: Fri, 3 Jun 2016 19:50:42 +0300
From: Grygorii Strashko <grygorii.strashko@...com>
To: Ivan Khoronzhuk <ivan.khoronzhuk@...aro.org>,
<mugunthanvnm@...com>, <linux-kernel@...r.kernel.org>
CC: <linux-omap@...r.kernel.org>, <netdev@...r.kernel.org>,
<robh+dt@...nel.org>, <pawel.moll@....com>, <mark.rutland@....com>,
<ijc+devicetree@...lion.org.uk>, <galak@...eaurora.org>,
<bcousson@...libre.com>, <tony@...mide.com>,
<devicetree@...r.kernel.org>
Subject: Re: [PATCH] net: ethernet: ti: cpsw: remove rx_descs property
On 06/03/2016 01:43 AM, Ivan Khoronzhuk wrote:
> There is no reason to hold s/w dependent parameter in device tree.
> Even more, there is no reason in this parameter because davinici_cpdma
> driver splits pool of descriptors equally between tx and rx channels.
> That is, if number of descriptors 256, 128 of them are for rx
> channels. While receiving, the descriptor is freed to the pool and
> then allocated with new skb. And if in DT the "rx_descs" is set to
> 64, then 128 - 64 = 64 descriptors are always in the pool and cannot
> be used, for tx, for instance. It's not correct resource usage,
> better to set it to half of pool, then the rx pool can be used in
> full. It will not have any impact on performance, as anyway, the
> "redundant" descriptors were unused.
>
> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@...aro.org>
> ---
>
> Based on master
>
> Documentation/devicetree/bindings/net/cpsw.txt | 3 ---
> arch/arm/boot/dts/am33xx.dtsi | 1 -
> arch/arm/boot/dts/am4372.dtsi | 1 -
> arch/arm/boot/dts/dm814x.dtsi | 1 -
> arch/arm/boot/dts/dra7.dtsi | 1 -
Pls, split DT and non-DT changes, seems code changes should go first.
> drivers/net/ethernet/ti/cpsw.c | 13 +++----------
> drivers/net/ethernet/ti/cpsw.h | 1 -
> drivers/net/ethernet/ti/davinci_cpdma.c | 6 ++++++
> drivers/net/ethernet/ti/davinci_cpdma.h | 1 +
> 9 files changed, 10 insertions(+), 18 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/net/cpsw.txt b/Documentation/devicetree/bindings/net/cpsw.txt
> index 0ae0649..5fe6239 100644
> --- a/Documentation/devicetree/bindings/net/cpsw.txt
> +++ b/Documentation/devicetree/bindings/net/cpsw.txt
> @@ -15,7 +15,6 @@ Required properties:
> - cpdma_channels : Specifies number of channels in CPDMA
> - ale_entries : Specifies No of entries ALE can hold
> - bd_ram_size : Specifies internal descriptor RAM size
> -- rx_descs : Specifies number of Rx descriptors
> - mac_control : Specifies Default MAC control register content
> for the specific platform
> - slaves : Specifies number for slaves
> @@ -70,7 +69,6 @@ Examples:
[....]
> slaves = <2>;
> active_slave = <0>;
> diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
> index 4b08a2f..635be3e 100644
> --- a/drivers/net/ethernet/ti/cpsw.c
> +++ b/drivers/net/ethernet/ti/cpsw.c
> @@ -1277,6 +1277,7 @@ static int cpsw_ndo_open(struct net_device *ndev)
> ALE_ALL_PORTS, ALE_ALL_PORTS, 0, 0);
>
> if (!cpsw_common_res_usage_state(priv)) {
> + int buf_num;
> struct cpsw_priv *priv_sl0 = cpsw_get_slave_priv(priv, 0);
>
> /* setup tx dma to fixed prio and zero offset */
> @@ -1305,10 +1306,8 @@ static int cpsw_ndo_open(struct net_device *ndev)
> enable_irq(priv->irqs_table[0]);
> }
>
> - if (WARN_ON(!priv->data.rx_descs))
> - priv->data.rx_descs = 128;
> -
> - for (i = 0; i < priv->data.rx_descs; i++) {
> + buf_num = cpdma_chan_get_buf_num(priv->dma) / 2;
Could you get rid of "/ 2", pls?
> + for (i = 0; i < buf_num; i++) {
> struct sk_buff *skb;
>
> ret = -ENOMEM;
> @@ -1999,12 +1998,6 @@ static int cpsw_probe_dt(struct cpsw_platform_data *data,
> }
> data->bd_ram_size = prop;
>
> - if (of_property_read_u32(node, "rx_descs", &prop)) {
> - dev_err(&pdev->dev, "Missing rx_descs property in the DT.\n");
> - return -EINVAL;
> - }
> - data->rx_descs = prop;
> -
> if (of_property_read_u32(node, "mac_control", &prop)) {
> dev_err(&pdev->dev, "Missing mac_control property in the DT.\n");
> return -EINVAL;
> diff --git a/drivers/net/ethernet/ti/cpsw.h b/drivers/net/ethernet/ti/cpsw.h
> index e50afd1..16b54c6 100644
> --- a/drivers/net/ethernet/ti/cpsw.h
> +++ b/drivers/net/ethernet/ti/cpsw.h
> @@ -35,7 +35,6 @@ struct cpsw_platform_data {
> u32 cpts_clock_shift; /* convert input clock ticks to nanoseconds */
> u32 ale_entries; /* ale table size */
> u32 bd_ram_size; /*buffer descriptor ram size */
> - u32 rx_descs; /* Number of Rx Descriptios */
> u32 mac_control; /* Mac control register */
> u16 default_vlan; /* Def VLAN for ALE lookup in VLAN aware mode*/
> bool dual_emac; /* Enable Dual EMAC mode */
> diff --git a/drivers/net/ethernet/ti/davinci_cpdma.c b/drivers/net/ethernet/ti/davinci_cpdma.c
> index 18bf3a8..395647c 100644
> --- a/drivers/net/ethernet/ti/davinci_cpdma.c
> +++ b/drivers/net/ethernet/ti/davinci_cpdma.c
> @@ -543,6 +543,12 @@ struct cpdma_chan *cpdma_chan_create(struct cpdma_ctlr *ctlr, int chan_num,
> }
> EXPORT_SYMBOL_GPL(cpdma_chan_create);
>
> +int cpdma_chan_get_buf_num(struct cpdma_ctlr *ctlr)
> +{
> + return ctlr->pool->num_desc;
> +}
> +EXPORT_SYMBOL_GPL(cpdma_chan_get_buf_num);
> +
> int cpdma_chan_destroy(struct cpdma_chan *chan)
> {
> struct cpdma_ctlr *ctlr;
> diff --git a/drivers/net/ethernet/ti/davinci_cpdma.h b/drivers/net/ethernet/ti/davinci_cpdma.h
> index 86dee48..f059856 100644
> --- a/drivers/net/ethernet/ti/davinci_cpdma.h
> +++ b/drivers/net/ethernet/ti/davinci_cpdma.h
> @@ -81,6 +81,7 @@ int cpdma_ctlr_dump(struct cpdma_ctlr *ctlr);
>
> struct cpdma_chan *cpdma_chan_create(struct cpdma_ctlr *ctlr, int chan_num,
> cpdma_handler_fn handler);
> +int cpdma_chan_get_buf_num(struct cpdma_ctlr *ctlr);
> int cpdma_chan_destroy(struct cpdma_chan *chan);
> int cpdma_chan_start(struct cpdma_chan *chan);
> int cpdma_chan_stop(struct cpdma_chan *chan);
>
--
regards,
-grygorii
Powered by blists - more mailing lists